Tweet
Hello guys I've been facing this issue on my 2017 BS4 PULSAR 200 NS ABS where the bike looses power post 7k rpm and when i redline the bike doing speeds around 95-100 and shift the gear from 4th to 5th the bike starts slowing down and comes down to like 85 kmph and stay there even i give full throttle, i got it checked by the mechanic in ASC and my always go to mechanic and both said my clutch plates have worn out .I got the clutch plates replaced today and i still face the same issue . Have any of you faced the same issue or know how i can resolve this please let me know
-
-
Re: Bike loses power while accelerating and decelerates while doing full throttle
Topic Approved.
If your clutch plates are the issue, then it always revs up higher and the bike doesn't move, as if the bike is in neutral. This is specially when you give throttle jerkily.
This may also happen if the clutch wire is set too tight, and there's no play. Get that checked too. You can check it yourself by checking the clutch lever.
When you are at 85 kmph, what is the rpm? If the engine revving high or is it feeling under pressure??---
Brotherhood, Rules, Freedom. Xbhp.
Indian riding = Alertness, Anticipation and Adjustment.
Comment