Thanks a lot man, i'll be implementing the new diagram wiring along with APE RR Unit. I'll post the results as soon as i'm done with it. :-)

That is exactly how I have connected my Relays

Regarding APE RR, as i said couldn't get tool so postponed by another week

Just a simple query, if instead of 2 SPST relays, i use a single SPDT relay, it will also work in the same way, right?

Have you rewinded the coil? for HID rewinding may not be required, but for a Halo it might as u r going to use a 55/60, u may not get enough backup.

I have installed another relay just infront of the main HL switch,once the switch is on, powering the lights will be from the relay, just a crude way, later I changed to 2 SPSTs. And for bixenon HID, only one relay is required as the high beam is from the solenoid, so the stock swtich can directly connect to the solenoid.

Generally I'll try to sort out the things myself first, then only I consult with any one, so my approach will be sometimes crude.

Better u prepare all ur amos handy first. Then u set out for the performance

No, if u do like in my first dia, ur low beam will be always on as the contact is always there, for that only I've put another SPST just after the main switch. I hope its clear now.

Thanks for the update. I'll install two SPST's.