Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Always use both brakes to reduce speed.

Our Partner

Announcement

Collapse
No announcement yet.

Pulsar 180 UG4 doesn't start after IN NO RUNNING CONDITION for 2 days

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Pulsar 180 UG4 doesn't start after IN NO RUNNING CONDITION for 2 days

    Hey guys,

    I am facing a problem. I have pulsar 180 UG4 and you all know that it doesn't have kick starting function. I use my bike occasionally in 3 or 4 days. After 2 or 3 days whenever i want to use my bike, it takes around at least 20 minute to start the engine.

    The CHOKE doesn't help too. I use choke then i start the engine, leave the choke on for 14 to 20 seconds then i shut the choke again. After it i shift the gear and accelerate, then the engine stops with a sound.

    After many attempts i able to start bike. What is the solution? Help me please.
    "When the god is on your side, then who else is on the other side"

    sigpic
    Tags: None
  • #2
    Query Approved
    Join xBhp On



    My photography page: Gourab Das Photography

    Comment

    • #3
      Thanks Gaurab Da

      Thanks Gaurab da for quick approval
      "When the god is on your side, then who else is on the other side"

      sigpic

      Comment

      • #4
        Originally posted by thehbkhim View Post
        Hey guys,

        I am facing a problem. I have pulsar 180 UG4 and you all know that it doesn't have kick starting function. I use my bike occasionally in 3 or 4 days. After 2 or 3 days whenever i want to use my bike, it takes around at least 20 minute to start the engine.

        The CHOKE doesn't help too. I use choke then i start the engine, leave the choke on for 14 to 20 seconds then i shut the choke again. After it i shift the gear and accelerate, then the engine stops with a sound.

        After many attempts i able to start bike. What is the solution? Help me please.
        Do you let the bike idle for some time after you start it. (after shutting choke). Please observe your idle rpm. After you start the bike let it idle (do not use any throttle) till it reaches the idle RPM. (should generally take 45-60 seconds) wait for 15 seconds more. Then put in gear accelerate gently for some time. Then use normally.
        Try this and let me know...

        BTW i am taking for granted that the bike is serviced regularly. Otherwise if not please get it serviced...
        Last edited by Motorcyclist; 11-27-2009, 01:35 PM.
        Riding the BULL....(with out the LET)...
        2004 Indica DLS|2005 Kinetic Zing 80|2009 HH Hunk

        Ride Safe...you owe it to the person who will be affected if you didn't

        My Blog - have fun
        http://sadugiri.wordpress.com/

        Comment

        • #5
          @Motorcyclist Thanks mate. Let me try it.
          "When the god is on your side, then who else is on the other side"

          sigpic

          Comment

          • #6
            Originally posted by thehbkhim View Post
            Hey guys,

            I am facing a problem. I have pulsar 180 UG4 and you all know that it doesn't have kick starting function. I use my bike occasionally in 3 or 4 days. After 2 or 3 days whenever i want to use my bike, it takes around at least 20 minute to start the engine.

            The CHOKE doesn't help too. I use choke then i start the engine, leave the choke on for 14 to 20 seconds then i shut the choke again. After it i shift the gear and accelerate, then the engine stops with a sound.

            After many attempts i able to start bike. What is the solution? Help me please.
            Oh god thankss, after reading the title of post i thought that your battery died. you took out my mind out of ma skeleton
            as you mentioned that you start it after it is OFF for a few days(that too in winter) then it means that engine is fully cooled down and needs a bit of more choke than it would require on normal morning starts.so, itz normal nothing to worry about.
            alright coming to your problem
            1)Is your carb. clean, get it cleaned by SC if not.
            2)Generally, you should practice to drive it ON choke for atleast 30-40secs(even ride it with choke ON for 500mts-1km as u start it after a few days),if itz too cold.
            3)use some throttle instead of choke,(that's what i practice) and then try to accelerate upto 2K RPM and start riding it and donot take over 2K-2.5K RPM for 1KM.
            as your bike is new so i donot think it is a major issue its just due to a bit more cold weather.
            Last edited by abhichotu.abhi; 11-28-2009, 12:16 AM.

            Comment

            • #7
              How old is your spark plug ?

              KMS please...
              "The trouble with the rat race is that even if you win, you're still a rat" - Lily Tomlin

              Comment

              • #8
                Originally posted by mithun View Post
                How old is your spark plug ?

                KMS please...
                Well my spark plug is old as my bike. My bike is just 1 month old and only 1st service has been taken.
                "When the god is on your side, then who else is on the other side"

                sigpic

                Comment

                Previous template Next
                Working...
                X
                © xBhp.com 2026. All rights reserved.
                Designed by xBhp