Announcement

**The Monk** · 07-20-2013, 12:12 PM

Re: Suzuki ax 100 powerbox

Query Approved

**kb100** · 07-20-2013, 05:34 PM

Re: Suzuki ax 100 powerbox

Originally posted by Ax100 View Post

[ATTACH=CONFIG]108938[/ATTACH]Thanks very much for your help Eduardo

Eduardo, the manifold and powerbox in the photo is from a model called tvs/ind suzuki supra its a very rare model and as a result parts like these are extremely difficult to come by , doc used to have a few of these , not sure he has any at present, there was a member called roopakm who owns ,one presently , kindly contact him and inquire whether he has one to spare

**Ax100** · 07-22-2013, 08:39 PM

**kb100** · 07-22-2013, 09:42 PM

Re: Suzuki ax 100 powerbox

good luck buddy just make sure that the volume of the container matches, with the real thing and also make sure it is airtight, araldite will come in handy

**ilango** · 08-01-2013, 11:35 AM

Re: Suzuki ax 100 powerbox

"Do it Yourself" is the way to go. There are just 2 point you need to keep in mind.
1) The Volume should be almost equivalent to the cc of the engine. So ideally something close to 100 ml would do. Volume does not consider the hose and other extensions.
2) The end which attaches to the hose should be funnel shaped and always facing downwards.
Check if any rubber manifold from Yamaha, Kawasaki or other 2 stroke bikes in Argentina would have a matching bolt pattern. That would make your job simpler. Look for Induction box (Yamaha YEIS) or Delta box (Kawasaki). They are all one and the same and generically known as boost bottles. Somewhere in the net there is also a good tutorial for a DIY boost bottle.

**srinikasyap** · 12-25-2013, 03:26 PM

Re: Suzuki ax 100 powerbox

IS this available in india???

**Bibhu** · 12-25-2013, 03:33 PM

Re: Suzuki ax 100 powerbox

Originally posted by srinikasyap View Post

IS this available in india???

Yes. But very hard to find. Look on fb groups. Some one might be able to source it.

Sent from my GT-I9001 using xBhp Connect mobile app

**srinikasyap** · 12-25-2013, 03:58 PM

Re: Suzuki ax 100 powerbox

Thank you so much. Would look around.

Do you have more info on this powerbox?

**Bibhu** · 12-25-2013, 04:56 PM

Re: Suzuki ax 100 powerbox

Originally posted by srinikasyap View Post

Thank you so much. Would look around.

Do you have more info on this powerbox?

Look for a shogun manifold and power box. Would be easier to locate. Although it would be a bit costly. Post a request on spareswala page.

Sent from my GT-I9001 using xBhp Connect mobile app

**augmentor** · 12-26-2013, 11:38 AM

Re: Suzuki ax 100 powerbox

Originally posted by srinikasyap View Post

Thank you so much. Would look around.

Do you have more info on this powerbox?

Few months back I had picked one from the GP road for my RX, its was an OE powerbox.
I was suspecting some lag in power and hence went for complete replacement.
These items generally are not prone to wear hence very limited in stock in the market.
you need to mod this powerbox though to suit your requirement.

**srinikasyap** · 12-31-2013, 03:24 PM

Re: Suzuki ax 100 powerbox

ready to fit???
manifold? i can use the stock one? what changes are required???

**ilango** · 12-31-2013, 04:41 PM

Re: Suzuki ax 100 powerbox

Originally posted by srinikasyap View Post

ready to fit???
manifold? i can use the stock one? what changes are required???

Hi Srini, Are you planning to put up a powerbox in your Yezdi?

**srinikasyap** · 12-31-2013, 04:43 PM

Re: Suzuki ax 100 powerbox

I was planning to, but heard there i a lot of work that needs to be done on that.
Do you know the feasibility. without modifying anything permanently.

This is for my Ind-suzuki AX 100.

**ilango** · 12-31-2013, 04:52 PM

Re: Suzuki ax 100 powerbox

Originally posted by srinikasyap View Post

This is for my Ind-suzuki AX 100.

Firstly this will work only in a 2 stroke bike with a reed valve. I presume your AX100 has one. It is very much feasible to install one. All you need is the intake manifold rubber flange of the Supra or custom make a flange with a small pipe protruding on the upper side. Take Yamaha YEIS manifold for reference. Yamaha calls it YEIS (Yamaha Energy Induction System), Kawasaki called it Delta box, Suzuki calls it powerbox. In the end it is all the same. The box has to be placed above the level of this manifold and the bottom end has to be tapered towards the manifold. Could you please post a pic of the manifold in your bike?

Announcement

Suzuki ax 100 powerbox

Suzuki ax 100 powerbox

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment