The Personal Computer Thread

[myg124]

anvancy: dude, the nvidia problem is not the case with every other card these days. Its only from faulty ones that were assembled and that line has been creating problems. If some problem had to crop up it would have done long time back!

I have used both ATI n nvidia n find both equal.

[gold_heart007]

Thanks. I Just checked Ubuntu's site, the latest version is 8.04.1, I am downloading it via torrent.......

Excellent choice u made, going with Hardy Heron!
About the effects, trust me just see the booting with KDE4 and u are already in love with it. And yeah, just go for Compiz and BeryL packs separately. Install them and u are in for a tr8 for sure!

[crazylord]

Excellent choice u made, going with Hardy Heron!
About the effects, trust me just see the booting with KDE4 and u are already in love with it. And yeah, just go for Compiz and BeryL packs separately. Install them and u are in for a tr8 for sure!

Good to see you back gold_heart The download is half done, i may be installing it by tomorrow. But pardon my ignorance, what are Compiz and Beryl packs. Are they some sort of transformation pack..

[flanker]

Compiz is desktop special animation and graphic pack. It would give you features like Desktop cube, sticky windows and stuff like that

[anvancy]

anvancy: dude, the nvidia problem is not the case with every other card these days. Its only from faulty ones that were assembled and that line has been creating problems. If some problem had to crop up it would have done long time back!

I have used both ATI n nvidia n find both equal.

buddy...the whole 8series was a faulty card series.not the 88one.which NVIDIA never told.the 8600GT specific had huge heating issues.u can check the forums.and the case is with every single card manufactured.since they never changed their thermal material.they kept on making cards with the faulty grease material.its because HP and DELL never made a call back situation many think that its just once in a blue moon situation..but many notebook forums specific tell the real story.and the regular bios downloads on both dell and HP just show where the problem is.

probably when u took the dv5 you already had an updated bios which is programmed for fluctuating the fan speed.resulting in change in temp.so my advice to u will be download a temp checker and monitor your temps..even if u dont stress it..that may help you to prevent shutdowns.

[myg124]

anvancy: mate, i did that n have a temp notifier installed alrdy. what i found isafter say 4-5 hours of non stop gaming, the left side gets warmer than usual( without a/c room) n yes the temperatures do peak. But thats huge enough for a lappy. a couple of days back i went on playing for as many hours but it didnt give in. HP r upto it i guess. so r dell.

I have the ATI Radeon 2600 Pro in my iMac and works gr8. Want nvidia to solve these issues soon. whats the scene with the quadro series mann??

[anvancy]

anvancy: mate, i did that n have a temp notifier installed alrdy. what i found isafter say 4-5 hours of non stop gaming, the left side gets warmer than usual( without a/c room) n yes the temperatures do peak. But thats huge enough for a lappy. a couple of days back i went on playing for as many hours but it didnt give in. HP r upto it i guess. so r dell.

I have the ATI Radeon 2600 Pro in my iMac and works gr8. Want nvidia to solve these issues soon. whats the scene with the quadro series mann??

i have zero idea of quadro.but mainly they run on the same platform.my friend recently changed his card function from geforce to quadro by installing software.which that i really dont know.

[gold_heart007]

Good to see you back gold_heart what are Compiz and Beryl packs. Are they some sort of transformation pack..

its good to see you too buddy.
Beryl and Compiz are the best utilities that i've came across. well, transformation packs are for transforming the complete looks of the installed os, affecting the shell also.
Whereas, Beryl and Compiz are free utilities that can be installed with few Linux versions. I tried them on Fiesty Fawn(7.0)! With Beryl, you can make your desktop use some jaw dropping & beautiful 3D effects.
The Beryl Project brings 3D desktop visual effects that improve usability of the X Window System and provide increased productivity though plugins and themes contributed by the community giving a rich desktop experience.The latest package will install the compositing window manager, window decorator, theme customization tool and the management tool to launch beryl.

Ok, now good thing with Compiz...Ubuntu 8.04 comes with Compiz Fusion pre-installed and on supported hardware offers a wide array of Visual Effect . Now depending on graphic hardware of computer one could chose from three level of Visual Effect (From System -> Preferences -> Appearance )
The topmost level is advanced and recommended for PC with descent graphic hardware , enables effects like wobbly windows, transparency , animated workspace switching etc.

Plus, the installation is quite simple. Just let it finish dl then post some gr8 screenies.

[tazz]

Been a linux fan for a long time, my first *nix install was Redhat 7.2
Right now i am typing here from Kubuntu (kde4 + ubuntu 8.04.1)
My advice would be not to use compiz or beryl, but try Kwin if you are using KDE (but i wouldnt know much about at as i mostly work on konsole )

[crazylord]

Ok. I get it. So i wont need to install compiz as it comes preloaded. I had used Linux sometime back (it was some SUSE version I got from a digit dvd), it was great but the only problem I had was that I wasn't able to install any new software! So, I hope I will have an easier time with ubuntu.

Any suggestions from where I can start learning more about Linux?

[prakash_mvpa]

there is nothing to learn in Linux.you may learn automatically using terminal commands etc .also ,unlike M$-DOS CLI ,Linux bash shell can autocomplete commands etc.no worry.
there are books available for Linux.I will say ,stick with either debian or redhat(fedora).debian package management is the best(well ,pacman of archlinux is really the best ,but the distro needs n00b's to use lot of command line).

you may have to install nvidia or ati driver.compiz pwns vista's aero. also ,compiz-fusion is kind of lot of plugins etc and there are repositories for latest svn/git builds.

Ubuntu is the best choice for a newbie.
follow this guide :
Ubuntu:Hardy -
similarly ,
The Unofficial Fedora FAQ

and nice to know ,so many ppl are interested in Linux .

[crazylord]

Thanks for those links prakash Really helpful. Oh, and I will bug you guys a little bit if I have any trouble with ubuntu..

[prakash_mvpa]

guys ,I am having problem with DNS service of BSNL here in kerala.also opendns too isnt working fine *NOW*.
currently I am resorting to some USA(verizone) dns servers.
I urge please post what DNS Servers are you using now.
for linux users ,just post the output of /etc/resolv.conf file and M$ windows users refer this : How To Find Out What My DNS Servers Address Is
for me :

prakash@praka:~$ cat /etc/resolv.conf 
nameserver 4.2.2.1
nameserver 4.2.2.2
nameserver 4.2.2.3
nameserver 4.2.2.4
nameserver 208.67.222.222
nameserver 208.67.220.220

opendns is failing badly for me

[prakash_mvpa]

*ADMIN* -please note this:-

admin :xbhp is loading slow for me.please go through the tracert output.

prakash@praka:~$ tracepath xbhp.com
 1:  59.93.5.x (59.93.5.x)                                  7.210ms pmtu 1492
 1:  59.93.0.1 (59.93.0.1)                                 55.648ms asymm  2 
 1:  59.93.0.1 (59.93.0.1)                                 56.580ms asymm  2 
 2:  no reply
 3:  no reply
 4:  125.16.156.37 (125.16.156.37)                         96.344ms asymm  7 
 5:  125.21.167.29 (125.21.167.29)                        100.052ms asymm  6 
 6:  12.86.240.17 (12.86.240.17)                          1003.809ms asymm 11 
 6:  12.86.240.17 (12.86.240.17)                          5902.146ms asymm 11 
 7:  tbr2.la2ca.ip.att.net (12.122.104.94)                1060.505ms asymm 23 
 7:  tbr2.la2ca.ip.att.net (12.122.104.94)                1056.637ms asymm 23 
 8:  cr2.la2ca.ip.att.net (12.122.19.197)                 1033.890ms asymm 23 
 9:  12.122.30.29 (12.122.30.29)                          1041.920ms asymm 21 
10:  cr2.dvmco.ip.att.net (12.122.30.26)                  5923.531ms asymm 20 
11:  cr1.cgcil.ip.att.net (12.122.31.86)                  1075.905ms asymm 20 
11:  cr1.cgcil.ip.att.net (12.122.31.86)                  1092.333ms asymm 20 
12:  cr1.cl2oh.ip.att.net (12.122.2.206)                  1053.904ms asymm 18 
12:  cr1.cl2oh.ip.att.net (12.122.2.206)                  1058.221ms asymm 18 
13:  cr2.cl2oh.ip.att.net (12.122.2.126)                  1071.922ms asymm 18 
14:  cr2.phlpa.ip.att.net (12.122.2.210)                  1073.936ms asymm 17 
15:  cr1.wswdc.ip.att.net (12.122.4.54)                   1081.912ms 
16:  tbr1.wswdc.ip.att.net (12.122.16.50)                 1073.968ms asymm 15 
17:  gar1.ascva.ip.att.net (12.122.80.193)                1051.925ms asymm 12 
18:  12.117.208.18 (12.117.208.18)                        1051.922ms asymm 14 
20:  xbhp.com (64.130.9.251)                              1065.706ms reached
     Resume: pmtu 1492 hops 20 back 49

^this is too much time! .please ask the web admin to fix this.
edit: I am on bsnl dataone broadband in cochin ,kerala.

[MG]

The speed is absolutely fine here.