Announcement

**nav75** · 07-19-2003, 11:51 AM

sorry for asking a basic question. whats this locking plate? Where is this located? Whats the use of it?

**rohit_180** · 07-19-2003, 11:58 AM

The front sprocket fits into a shaft which has a sort of hexagonal shape, but to prevent it from coming out there is a small plate, which should be bolted to the sprocket. But I'm not getting a proper locking plate whick fits and doesnt touch the chain.

**rajnish** · 07-19-2003, 12:03 PM

get one made if possible,or buy a big one and get it to shape from a lathe.

**amar** · 07-19-2003, 12:11 PM

hey tech guru help this guy with something.

**nav75** · 07-19-2003, 12:42 PM

oh I got it. I have seen it once my friends opened up an rxg...man that was my first exp in seeing a bike's engine, gearbox all open up. I have seen a lot of scooters on the open heart surgery table thought

**rohit_180** · 07-19-2003, 01:14 PM

I think the bike will be much more rideable in the town using a 13T front sprocket.

**nav75** · 07-19-2003, 01:24 PM

get the bike modified ... bring to pune .. we will ride and see

**rajnish** · 07-19-2003, 01:59 PM

what is current size front and rear?

**rohit_180** · 07-19-2003, 02:05 PM

Rear is stock, I dont know its size. Front stock sprocket is 15T. Currently i'm running 16T. I think 13T will seriously screw top speed and cruising. But I think it will pull pretty hard in 1st n 2nd gear.

**rajnish** · 07-19-2003, 02:34 PM

don't think will improve bottom tht much.try a 14 first.for better pulling try the rx carb,ask rash for all values.

**rohit_180** · 07-19-2003, 02:41 PM

I've tried RX carb, rash's bike. I couldnt find it much quicker than my stock 180. But later when he fit the fiero carb, it was an altogether different bike, good midrange and low end. And I've got RD carb(right side, without choke n starter system). Which cable should I use for this carb?

**rajnish** · 07-19-2003, 02:45 PM

ideally should be rd cable with two wires disabled.on right side carb u'll have to seal the 2 st inlet and carb balance inlet.what was cost for this?what size is fiero carb?

**nav75** · 07-19-2003, 03:13 PM

hey rohit .. when u fixed fiero carb what made the increase in low and mid range? Did u changed the jets?

**rohit_180** · 07-19-2003, 05:39 PM

I didnt fix fiero carb on my bike, I rode Rash's bike. The carb was installed with stock jets. And I got the RD carb from my mechanic for a week. anyways the RD pilots are 25? Pulsar is only 15. I've got the locking plate also guys, so I'll do this and reply about it day after tomm.

Announcement

13 T Sprocket locking plate.

13 T Sprocket locking plate.

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment