hi venkatesh...i am not convinced entirely.....
even i hav tried a really serious ram thing.......but what works best is this....remove the rubber intake....dont put it back.....
cut a 50mm dia hole in the side cover....stick a 3inch 50mm pvc pipe in it....
and dump the stock carb...get a fiero 26mm carb....and a 16 inch front sprocket.....let the main jet stay...its 97.5 ..in comparison to the stock pulsar 115 jet...change the pilot to a 15 ..fiero original is 12.5 and works good....but a 15 will help a lil more .....
drill holes in the clutch basket......
take a simple water filter from filt-well and plug it to the crank case vent...and seal off the hole of the vent where it meets the airbox..(this mod hasnt been studied long enuf by me)
results...85 kmph in 2nd gear...105 in third...
max rpm increases from 9000 to 12000....not in top gear though....
not enuf torque....all this mods cost within 1200 bucks......and are worth it......
as to why a smaller carb works better than the stock 29mm..well i think ur smart wnuf to figure out.....also think how a smaller jet is porviding more power......
by chance if u dont figure it out......ask ron...
or me ..i think i'll convince u on both issues.....

well i need some info from u...where did u get the higher lift cams and how big a hole did they burn.....

the ram air induction helps any bike after a certain rpm only.is more helpful in multi cylinders.yes smaller carbs help out in low rpm power but with rise in rpm u need better gas flow and small carb can't keep upto the engine suction.having a bigger pilot jet helps in low end but rash do u feel the transit to the main will be smooth if they r not matched properly?and the holes will help in clutch basket due to better oil flow as the clutch is a wet clutch system.

rash. if you rem me..i was posting up pulsar data.
Have you managed to figure out the Valve timings,I am stuck at the con-rod measurements...

me tried ram air too.

I wonder if anyone can help me out with this......

I made some changes in the ram induction of my p150 and believe it or not , when i rode the bike alone without the pillion it hardly touched 100 on the speedometer but when i rode the bike with a pillion it touched 112....... CRAZY no!!!!!!! It is not possible but how it happened????

I guess the pillion was giving an air propulsion effect to the bike by farting with a lot of force. he he....

venky...... i wonder how u gain such a gr8 speed in ur Tbird ... thanks 4 tellin me d air propultion effect.... gosh man u smell bad!!!!!!

Dont talk about my tb you funk. It was you who ruined my bike, cams, valve springs and what not. get lost man dont talk to me.

Love u for this maan!!!!!!!!!! but still i will keep on screwing ur bike......
HUNK IS MY NAME AND MODIFICATION ON VENKY'S BIKE IS MY AIM.... HA HA HA

what r u talkin about?

Dont talk about modifications. You know nothing about it. I had a good setup which you ruined. Now no mods. Ill try to bring my bike back to its original shape. (stock)

SO AT LAST U COME BACK TO TRACK...... WELL HOW ABOUT EXPERIMENTING on the ram induction in ur bike.....

forget it.