The rebuild has finally started.

Parts procured from Pune -

1. Cosworth Air-Filter - From Planet DSG - Rs 1500
2. A race throttle - From Nanapeth - Rs 400
3. Motul 300V oil.- From Planet DSG - Rs 985

Parts procured from Aurangabad
1. 4S Champion rectangular headlight by Minda - Rs 450
2. Yamaha Yokes and switch assembly (Minda) - Rs 540
3. Amaron Gold 5 Amp battery - Aurangabad - Rs 1450
4. Cables, friction plates, pressure plates - Rs 590
5. Bajaj Discover brake drums - Rs 1200

And last but not the least..I was able to lay hands on the KB 100 RTZ block piston set and connecting rods dirt cheap..I mean dirt cheap!

Parts yet to be procured -
1. RD350 meters and meter bracket.
2. KB wiring.
3. Kick and gear shafts.
4. A new crank and connecting rods.
5. Break shoes
6. Ignition switch.
7. Front shock-up oil seal holders.
8. HID kit ( really have no clue about this and haven't used it earlier. Will look and other threads and decide on one).

I plan to have my rebuild complete by the December end and have first ride of the coming new year on the Endura.

As of now..I've decided on naming it Loki (after the Norse god). If you can come-up with something better..just shoot!

Cheers,
Sohaibak

Good going Sohaibk ! get some nice matching offroad fork boots too. You get the DT style headlamp with fairing unit. Give it a thought.

Thanks for the reply Yamdoot. Fork boots is a great idea..added to the procurement list.

For the headlight..I did have a look at the after market ones...but couldn't makeup my mind. Did have a look at an Endura with a FZ headlight on another thread. Here's the link to the pic



But, considering the fact that I am planning to go for RD meters, the rectangular headlight would give the bike a more meaty look.

Cheers,
Sohaibak

Ya thats why i suggested the DT headlight. check the pic out.

the kbs ran a mechanical tacho , im not sure wether the enduros engine has the provisions for the same, so please check that before you buy the rd speedo/tacho unit imo go for an electronic unit

This was one of my favourite bikes and I was searching all around to source one and got to see 1 with disc brakes and was in ok condition, he was asking for 15k and in the mean time was able to get a RX100 and changed my decision, have restored my RX100 to original, would want to see my bike simillar to the one in the snap



Possibly will do it sometime next year

Here's an update.

Some more parts sourced from Pune -

1. RD350 Speedometer and Tachometers.
2. KB Wiring Harness.
3. Kick and Gear shafts.
4. Break Shoes.

Parts yet to be sourced -
1. RD350 Meter bracket (Did not find one here in Pune. Will check in Mumbai,this weekend).
2. Crank Case - Have found one..and will pick it up next Tuesday.
3. HID - I'm still researching on this one as I've heard its banned by the RTO. This is something that has the last priority in my mind.
4. Fork boots ( As suggested by Yamdoot).

Here's the pic with the stuff I bought along with the RD meters for the Endura. The meters are local ones but I got them cheap. If they work for a year..that would be great.

Got bunch of cables for the RD, clutch plates, Daichi points, front and rear break liners. Yezdi cables set, HT points and condensors, a single Yamaha OEM mirror and an RX 135 silencer (4speed).

Cheers,
Sohaibak

Really nice to see you ve procured these many parts. Are you going to put fairing on the headlight? IF you are putting fairing, then RD Speedo/Tacho wont be looking good. I will suggest you to put Shogun/Shaolin speedo/Tacho if available. As both these bikes had fairing on headlight. I sent you a PM.

Hi Vimalnair4u,

Thanks for the reply. I am going for a more naked look, with just the RD meters and the KB headlight. No fairing involved. Found a spare meter bracket in my RD stuff and that's what going on the bike.

Keeping extra spares never hurts...

Cheers,
Sohaibak

Re: Bajaj SX-100 (Enduro) - Is it worth it??

How much the RD Speedo/tacho costs ?
Btw good luck :beer:



if you did not succeed at the first try, please reload and try again

They cost a 1000 bucks Christo. But they are locally made ones and quality is decent at best.

Great Sohaib, If its a Naked look, Then RD meter looks best.

Here are some more pics spares procured for the Endura a.k.a Loki.




Unicorn Rear Mono-shock.


Loki - First watch after strip down.

As you can see the bike has both 18" rims. I have now decided to go for the 19" front and 17" Hero Impulse rims.Will also be installing the Impulse disc brake setup on it. The disc assembly has been procured today.

Will get the Impulse rims and tyres tomorrow. Here a few pics of people admiring my Yezdi (HADES) when I was roaming around buying spares. Looking at their expressions make all the restoration effort worth it.









As for the paint scheme..I've decided to go for the Black - Golden paint scheme as with the Limited Edition FZ.

Cheers,
Sohaibak

Looking for a screw - End up with a Jackpot!

Hi All,

Went around looking for an Endura Side panel..but couldn't get one. Will have to fabricate it. In the mean time, we got hold of a few more spares, primarily for the RD (CUPID) and Yezdi.

I also looked around for the Hero Impulse entire front end at a few Hero dealerships in Pune, but none of had any pricing details or information about spares availability. Does anyone know where I can get this?

Some pics of the spares -








Cheers,
Sohaibak