I have a two month old pulsar 180. Right from day 1, the bike was wobbling at 40-70kmph. I showed to SVC. They loosened the Collar. Problem was not solved. I showed to every mechanic in my place. An expert confirmly said that it is matter of front tyre. As per his Solution, I visited SVC and on Demand I replaced my Front mag assembly of a 220( display model in showroom). The problem had vanished with the new wheel. The mechanic was right. I then told the SVC the actual reason for the vibration. They told the tyre is faulty. I went to MRF showroom in my place and checked the condition of tyre. They said the tyre is in good condition and adjusted the breeding of the tyre with the mag again. When I rode my bike again, the problem still remained. When I and my mechanic checked the RIM, we found the fault. It was bent on left side. Which is purely a manufacturing defect. Now the SVC is not ready to replace the faulty mag and they are asking 2800INR for a new mag.They suggested me to apply insurance. I dont wish to apply insurance because it will decrease my valuation of the bike. So what to do? It is a manufacturing defect. So warranty will cover on this right? They said it might be my mistake, may be dropped to pothole. Damm is it possible?. Even is serious accidents I see the front Shocks get bent and not mag. The MRF service person told me that the tyre should get damaged first before the rim. Since there was air in my bike, he said there is now way the Mag getting damaged. So please help me in resolving my issue. Even the Engineer of bajaj has suggested me to claim insurance. Just now I called customer care and logged an complaint in this.