Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Check engine oil level before every ride.

Our Partner

Announcement

Collapse
No announcement yet.

Help me to identify this part please.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Help me to identify this part please.

    Last week I have done a water washed my bike- Yamaha SZ-R. It was from a water wash centre and I have removed and refitted the chain guard by my self.

    Please see the attached image. I have seen this in my parking area where I parked my bike. That time I was not sure, whether it has been fallen from my bike or not. Today I have removed the chain guard again to clean and lubricate. To my surprise I got another piece from the chain guard. Now I have the below two parts with me. Somebody please help me to understand what it is?.

    One is big and other one is small. Which can be connected together as shown in the second pic.

    Additional info: Please dont tell me this is washer like thing used in the chain guard box bolts. I have checked and conform it is not.

    Thanks in advance
    Nidin


    Click image for larger version Name: IMG_20181021_183554.jpg Views: 1 Size: 91.3 KB ID: 2002393

    Click image for larger version Name: IMG_20181021_183617.jpg Views: 1 Size: 96.9 KB ID: 2002394
    Last edited by xBhp; 10-22-2018, 10:58 AM.
    Tags: None
  • #2
    Re: Help me to identify this part please.

    Thread approved.

    Comment

    • #3
      Re: Help me to identify this part please.

      As per my friend, the chainguard is fitted with these along with rubber parts to fit snugly. Please check if you have secured everything properly. You must be missing some.

      Comment

      • #4
        Re: Help me to identify this part please.

        Originally posted by sdm_9999 View Post
        As per my friend, the chainguard is fitted with these along with rubber parts to fit snugly. Please check if you have secured everything properly. You must be missing some.
        No dear. That is bolt flange(?). Those parts are perfectly there in the chain guard. All the four are same shape and size.

        But this is something else looking similar to the bolt flanges. Inner diameter is smaller for one piece. So that it can be connected together as i shown in the second picture.

        If somebody have SZR workshop manual or parts list kindly share the same.

        Comment

        Previous template Next
        Working...
        X
        © xBhp.com 2026. All rights reserved.
        Designed by xBhp