Announcement

**Aryan** · 07-01-2009, 12:53 PM

Query Approved.

**mithun.08** · 07-01-2009, 01:54 PM

Originally posted by Marlon View Post

hi, i recently picked up a second hand suzuki shogun, '97 model. my main intension was to mode it to its max. like mainly porting it and fitting a chamber. i would like to know what other things i could do e respective of its fuel consumption or any other disadvantage. so i just wanted to kno what could be the craziest things to do to make this bike as fast as possible.
thanks

First get as many as pistons and rings.. we can talk about modification later.. because you are going to need many if you mod it to max and ride it to the potential it has been modded.

You can start with replacing stock filter with Uni filter[ with bigger jets] and get a chamber..

PS: Later you can add wings

**Chinmay Dangre** · 07-03-2009, 12:01 AM

Originally posted by Marlon View Post

hi, i recently picked up a second hand suzuki shogun, '97 model. my main intension was to mode it to its max. like mainly porting it and fitting a chamber. i would like to know what other things i could do e respective of its fuel consumption or any other disadvantage. so i just wanted to kno what could be the craziest things to do to make this bike as fast as possible.
thanks

Mod list for your SHOGUN
1.Uni filter
2. Size of Scavenging Port change
3. Spark Plug
4. High performance Ignition Coil and it's cable.
5. Carbon Fiber Reed Valve.
6. Forged Piston
7. Titanium Con Rod.
8. Exhaust canister with expansion chamber.
9. Change in rear sprocket (if u want to make it for dirt then higher size sprocket. Shogun is good for low range and somehow mid range but not good for high range.)
10. head shaving.
11. Re-Jetting (or change in carb "VM" size with the main jet)

Let me know the power after you done....If there is anything left in the list then suggest me.

**rambo** · 07-04-2009, 01:56 AM

how does the head shaving thing help dude??
can you plz explain,i wanted to know.
thankz.

**Chinmay Dangre** · 07-04-2009, 02:00 AM

Originally posted by rambo View Post

how does the head shaving thing help dude??
can you plz explain,i wanted to know.
thankz.

Head Shaving means removing or decreasing the surface of head from bottom side to increase the compression.

**Marlon** · 07-08-2009, 02:19 PM

@ mithun, well thanks. i actually kno that the parts of this bike are quite rare. well i found an ample supply of parts in a town called meerut in u.p. some how they hav all sorts of parts for the gun.

@ chinmay. thanx dude.. but tell me. i want to kno how by changing the coil it would help? and what coil to go for and where is it available? inc. price? or where can i get most of the parts u mentioned? inc. price if u r fimiliar with? coz m planin to get the bike done with mubharak in mumbai near ac market tardeo. if u fimiliar wit his work.

**Chinmay Dangre** · 07-08-2009, 02:38 PM

Originally posted by Marlon View Post

@ mithun, well thanks. i actually kno that the parts of this bike are quite rare. well i found an ample supply of parts in a town called meerut in u.p. some how they hav all sorts of parts for the gun.

@ chinmay. thanx dude.. but tell me. i want to kno how by changing the coil it would help? and what coil to go for and where is it available? inc. price? or where can i get most of the parts u mentioned? inc. price if u r fimiliar with? coz m planin to get the bike done with mubharak in mumbai near ac market tardeo. if u fimiliar wit his work.

Soon I will give you full list of spares with all the rates. Due to my internet connection I am not able to post some of the things here. When ever you want I can send the courier to you. Or if you are pune visitor then u can buy directly from me. my mail id is [email protected] or [email protected]
Another thing about your mechanic then I am sorry I don't know him...

**rambo** · 07-11-2009, 01:05 PM

Originally posted by Chinmay Dangre View Post

Head Shaving means removing or decreasing the surface of head from bottom side to increase the compression.

thankz pal..
wats the amount of metal to be removed from the head??
how is it determined???
cheers...

**Marlon** · 07-21-2009, 12:22 AM

@ chinmaya.. thanx dude.. will get in touch with u soon..

**atul_astro** · 07-21-2009, 01:58 AM

if ur serious about performance. plonk on a shaolin bore and a rod and go for a professional port setup

and btw, when using an expansion chamber, a high comp head will cause detonation..so thats not entirely correct..number one mistake most people do

cheers

**vasanth kumar** · 07-22-2009, 12:05 AM

@ atul
which con rod is best for fitting shaolins bore to shogun. TVS company has not released con rods

**atul_astro** · 07-22-2009, 01:06 AM

hard to comment. You do get full cranks though. But If I'd get a sample rod, would be worth checking

**Marlon** · 07-24-2009, 03:13 AM

is it possible to do wat u say, i.e use a sholin rod in a shogun?.. wat bout the crank?

Announcement

Shogun Performance advice

Shogun Performance advice

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment