Kurla-CST road is the (un)official junkyard of mumbai man. you will get 220 headlight assemblys being sold for as low as 800 bucks over there...less for the projectors separately. get it from there, open the seal beam up and install it yourself. Kinda like a DIY

@ steelbreeze

The headlight projector with angel eyes which these guys provide for say 1800 to 3600 bucks is very very sub standard.
DO NOT even think about purchasing it.

If you need a projector, buy a genuine projector of a high end car from junk and install a bulb in it.

But to be honest, a projector specially with angel eye will never suit a bull's personality.

You can do something like this.



here, you can install 2 projectors on the sides with hid (ofcource after sourcing another hid kit) and retrofit them in projectors.
Keeping your existing headlamp as it is with an H4 halogen bulb.
Would look better and feel better too.

Otherwise,
Can source small 3 inch autopal sealbeams and install them in this manner.




But again, here you can use H4 hid bulb already, so you'll have to just source another.

If currently you don't wish to spend more, you can do what a good friend of mine (Vishal has done)



Hence, it will be use it only when you need it to avoid people swearing funda...

So, i suggest do not cut the reflector and install an HID in that, use the hid maybe projectors too on the crash guard, will look much much better.

What do u think about this?




Bi-xenon Projector HeadLamp Bullet by MXSMOTOSPORT.COM - YouTube

This is the exact picture which the mxsmotosport guys have mailed me. They said it would cost me around Rs4500 with the HID projector minus the ballast and Rs5k for the complete set(that is including the headlight).

I guess the assembly in the video won't suit my bike as it has black on the reflector and the color of my bike is burgundy/maroon.

This same projector with ballast and bulb and angel eye is available for 3500~3800 bucks across many shops in mumbai.
I can let you know where to buy from if you need it...

I've opened up this projector and have seen everything personally.
Let me warn you, its very very bad in quality as well as output, in a day or two the inner surface turns white from chrome.
The output is not better than standard halogen too.

If you are going for projector, go for good quality ones like sajjt is using or from junk to save cost...

I spoke with pavan as well.I guess I will stick to my stock setup with the HID. Will later on think of going for the aux lights. Thank you so much for all the help guys. Will get back to trouble you guys if needed.

Dual HID with dual halogen in Yamaha Fazer

hello help me out im having set of dual HID with dual Ballast & with wires once i installed it in my Bike(yamaha fazer) with the setup of 02 halogen in high beam and 2 HID in low beam when it installed it was working but after 20 mins it get started flickering so i switched it off and i noticed that my horn also not giving proper sound in my bike im using stock battery 12v 5AH let give me suggestion what to do. I got HID set from @navnesh from bangalore....
thks in advance

Hi All Bike Gurus, I have an Apache 150 fitted with 35W HID and it draining battery (Sonic Rodheo 9Ah). I have brought a Bajaj UG4 RR. I want to connect UG4 RR to charge the battery instead of the stock one. If that is not possible, then I am ready to remove the HID and go for Philips 55/60 Halo. Pls pls pls guide me with this one. If not HID - the 55/60 halo is more than enough for me. HELP NEEDED!!!!!

Open the Lighting Coil which is behind the LH cover and post a picture of it here so that members can tell you the wire which you need to un-ground.

If you want to do rewinding then check this out

Even thought its for Apache RTR 180 ,you will get a good idea.

i own a cbz xtreme ...
i hav installed an philip HID in it already...
but i want to install small blue or red coloured led's in the space provided with the main reflector...

can anyone suggest me any suggestions...

did you yourself installed it???
if no then the mechanic that have installed it never get to him again...

because when you install the hid as the normal halogen bulb then your bike's batery does not support it in running mode...due to lack of current it fluctuates...
in order to remove this problem you need to make out a direct connection with the batery (positive terminal) to the beam which has HID...
remember to put an switch in between it else your HID would keep on goin as you switch on your bike...
Hope this helped you...

guys help me for projector shakin

actually me too fitted a hid proj in p180 2012 model......but i found shake in the the proj....guys pls help me.....wats the sols to overcome this prob?..

there might be some problem with the tightening of the projector else i've never heard about that the projector was loose...
which company projector is it???
if you cant fix its shaking then try fixing it with a double tape...

dude..........

actually its a xenon projector.........may be it ll be due to poor workmanship

I heard the bixenon projectors are not of good quality & become whiteish internally with use resulting in bad spread of light .
While single beam projectors from skoda , mercedes etc are very good .
So my question is , Is it possible to fit that moving plate & other things ( which make projector to work as bixenon , whatever it is called ) from bixenon projectors to the skoda , mercedes projector & make them bixenon ?
Any one tried it ?