Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Dawn & dusk make slight hard to adjust.

Our Partner

Announcement

Collapse
No announcement yet.

Piston Bedding

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Piston Bedding

    Hi Experts,

    I have a RE Classic 350..
    I wanted to understand few terms..
    a) Can anyone explain me what is Piston bedding??
    b) My bike has completed 2800 kms, is it recommended that i rip the bike like 70, 80 k's on low gears.. does it help smoothing the bike's piston. so that it doesn't vibrate at top speeds...

    Please assist me in becoming a better rider
    Tags: None
  • #2
    Two-stroke query approved.
    (Been There Done That) x 3.25

    Comment

    • #3
      Originally posted by sunilg View Post
      Two-stroke query approved.
      But Sunil...he has a RE350, shouldn't it be a four stroke query approved ?
      Skill is what keeps you on a Motorcycle
      Awareness + Skill is what keeps you out of harm's way
      ATGATT + Awareness + Skill means you might Live To Ride another day

      Comment

      • #4
        Originally posted by aargee View Post
        But Sunil...he has a RE350, shouldn't it be a four stroke query approved ?
        Very true
        ONLY GOD WILL JUDGE ME

        Suzuki Shogun (1994)
        Yamaha RX135 5-SPEED (1996)
        Yamaha RX135 (1997)
        Yamaha RXZ 5-SPEED (1997)
        Suzuki Fiero (2000)

        Comment

        • #5
          Originally posted by saharookie View Post
          Hi Experts,

          I have a RE Classic 350..
          I wanted to understand few terms..
          a) Can anyone explain me what is Piston bedding??
          b) My bike has completed 2800 kms, is it recommended that i rip the bike like 70, 80 k's on low gears.. does it help smoothing the bike's piston. so that it doesn't vibrate at top speeds...

          Please assist me in becoming a better rider
          Boss your run in is already over by now.Do what you like but try not to go to extremes

          Comment

          • #6
            Originally posted by aargee View Post
            But Sunil...he has a RE350, shouldn't it be a four stroke query approved ?
            ya that's right

            Comment

            • #7
              Originally posted by saharookie View Post
              b) My bike has completed 2800 kms, is it recommended that i rip the bike like 70, 80 k's on low gears.. does it help smoothing the bike's piston. so that it doesn't vibrate at top speeds...
              Never!

              Always ride at the recommended speeds for each gear. 70 - 80 on low gears? I don't think thats even possible on less than 3rd (Classic owners feel free to correct me if I'm wrong..) let alone advisable. Besides, doing it like this simply increases stress on an engine. Let time take its course and let the piston and bore bed down on their own. Just ride sensibly and the bike will be fine.
              www.beingthomas.wordpress.com

              Comment

              • #8
                RE always jerks on high gears in low speeds it cruises without any problem at 70-80 without any kind of turbulence from the engine. My advice would be not to rip it up while it is still a cherry you will regret it if your bore dies the first and second OS are a nightmare and it will never be the same. The jerkiness is a characteristic of the Royal Enfield
                RIP ਕਾਕਾ ਭੈਣੀਆਂਵਾਲਾ (Santokh Singh Rataurh)

                Comment

                • #9
                  already answered by dafc!! but just make sure that the engine is not over stressed, does not jerk or knock. Dont try pulling the bike in a high gear at a low speed. Keep the bike in the right gear.


                  My offerings to the gods of speed -

                  - KTM Duke 200
                  - Yamaha RXZ 5 speed


                  Comment

                  • #10
                    Originally posted by dafc View Post
                    RE always jerks on high gears in low speeds it cruises without any problem at 70-80 without any kind of turbulence from the engine. My advice would be not to rip it up while it is still a cherry you will regret it if your bore dies the first and second OS are a nightmare and it will never be the same. The jerkiness is a characteristic of the Royal Enfield
                    Originally posted by jd666 View Post
                    already answered by dafc!! but just make sure that the engine is not over stressed, does not jerk or knock. Dont try pulling the bike in a high gear at a low speed. Keep the bike in the right gear.
                    His query was exactly the reverse - high speed (or highest possible I guess) in low gears not vice versa
                    www.beingthomas.wordpress.com

                    Comment

                    • #11
                      Hi

                      Try reading the info at the link below. Should be helpful.

                      The Bullet: Mystries & Myths - Running-in a new Bullet

                      Especially these sections...

                      Point One:
                      Even if your bike has been used for YEARS in the city, say at 70Kmph max, DON'T try holding 120Kmph steady on the first interstate trip! Run-in the engine to 120Kmph first.

                      Point Two:
                      A suggested running-in method. Don't exceed 50Kmph for the first 1000Km. (OK, 3000 if you feel better that way) Then with engine warmed at 50Kmph, go to 60 and hold it for not more than half a minute. Do not repeat for at least 10 minutes (You can guess why, right ?) Repeat this process atleast 5 times before proceeding to next step, which is the same but holding time is one minute. Then repeat for 2min, 5min, 10min. This may have taken several days or weeks! Repeat this for 75, 95 and then 120 Kmph. NOW you can say your bike is run-in.




                      Originally posted by saharookie View Post
                      Hi Experts,

                      I have a RE Classic 350..
                      I wanted to understand few terms..
                      a) Can anyone explain me what is Piston bedding??
                      b) My bike has completed 2800 kms, is it recommended that i rip the bike like 70, 80 k's on low gears.. does it help smoothing the bike's piston. so that it doesn't vibrate at top speeds...

                      Please assist me in becoming a better rider
                      Most motorcycle problems are caused by the nut that connects the handlebars to the saddle!

                      Comment

                      Previous template Next
                      Working...
                      X
                      © xBhp.com 2026. All rights reserved.
                      Designed by xBhp