Tweet
Originally posted by spm_clt
View Post
how much will it cost for 4speed barrel and piston kit?
-
I bought the entire bore kit for 8500/-, Bangalore price.Raghu
-----------------------------------------------------
2009 Suzuki Access
2014 Ford Figo TDCI
2015 Duke 390
-----------------------------------------------------
B+ve, it's in my blood!
----------------------------------------------------- -
Thanks man.
am offered a used 4speed original block for 5000/- its a sparingly used one.
the engine was seized due to 2t pump problem so he is selling that block. i need to rebore it and use over size piston. currently am running with a resleeved engine with stock piston. what u guys think about the deal?. Do i need to go for it or stick with my sleeved one. my current setup is a good one with nice pick up. but the problem is that it gets overheated quickly. the engine is re sleeved two months back so my mech told me the heating problem will go away after run in .
guys please advise me on this
Comment
-
Thank you guys..........
Comment
-
4-Speed bore with std piston (ART), to be rebored for 0.25mm, if this is the case then try & negotiate & get hold of it. (I am assuming this coz you have not mentioned anything)Originally posted by spm_clt View PostThanks man.
am offered a used 4speed original block for 5000/- its a sparingly used one.
the engine was seized due to 2t pump problem so he is selling that block. i need to rebore it and use over size piston. currently am running with a resleeved engine with stock piston. what u guys think about the deal?. Do i need to go for it or stick with my sleeved one. my current setup is a good one with nice pick up. but the problem is that it gets overheated quickly. the engine is re sleeved two months back so my mech told me the heating problem will go away after run in .
guys please advise me on this
There is no point in using re-sleeved bores. Try searching for new or used bores.
Btw, which place are you from ?Comment
-
From kerala.................
Comment
-
my bike
Here is my bike rebuilt
spent 22000/-
1997 RXG
paid 11500 to owner papers 1500 rebuild 22000.
total 35000/-Last edited by spm_clt; 10-04-2010, 09:21 PM.Comment
-
its worth the price what u spent and u will also get in return good life from the bike a dedicated work seems to be done. good.
Comment
-
Bike is looking great Good job! Why didnt you go for the chrome front mudguard? Would have looked complete stock!
ONLY GOD WILL JUDGE ME
Suzuki Shogun (1994)
Yamaha RX135 5-SPEED (1996)
Yamaha RX135 (1997)
Yamaha RXZ 5-SPEED (1997)
Suzuki Fiero (2000)Comment
-
exactly go for the chrome front fender will add more beauty to the bike
Comment
-
wasn't readily available so settled for libero fiber one.
Comment
-
Kawasaki KB100/enduro/125 substitute parts list http://www.xbhp.com/talkies/508615-post105.htmlComment
-
yeah sure....
Comment
-
hey Guys,
I'm back and this time with the photos of my restored bike. I'm really sorry for this late reply. After restoration, I was out of India couple of times and wasn't either able to communicate here or spend time with my bike . I left it with my brother and he was taking care of it.
The bike has really come well. After coming back I rode it for few days and believe me, I'm really very happy with the ride. I'm jumping and want to ride more. BIG Thanks to Pradeep (Pyscho98) for all his help in sourcing the parts and guidance in restoring it and thanks to the mechanic for his work.
I just found a jerking issue when the bike was not in acceleration, I took it back to the mech and asked him to fix it. He said that it cannot be fixed 100% but he can fix it to some extent. Now, I feel that jerking has come down but still exists. I Need to look into this, any suggestion?
For now, I have shared the pictures. Please let me know your comments.Raghu
-----------------------------------------------------
2009 Suzuki Access
2014 Ford Figo TDCI
2015 Duke 390
-----------------------------------------------------
B+ve, it's in my blood!
-----------------------------------------------------Comment
-
Looks good
Pic 3 is amazing
Do let us know what went into the re-build. It will be useful for me since I have a 135 re-build coming up. If you are ok with it let me know (or PM) the mechanic/garage who did this.
Nowadays, I am obessed with tyres. So the standard question-> what tyres are those?
Keep RXing
EDIT: Pardon my curiousity KA19 your bike's reg. no reads, are you from Mangalore?Last edited by NitinGirish; 12-12-2010, 01:03 PM.A lone amateur built the ark. A large group of professionals built the Titanic...Comment
-
What's your needle's position in carb? It should ideally be set to middle or 2nd from top.Originally posted by Raghubrp View Post
Most important question - Did you change your generator (dynamo) during the rebuild? If so, get a triple confirmation if the magnet is for Rx135 or Rx100.Skill is what keeps you on a Motorcycle
Awareness + Skill is what keeps you out of harm's way
ATGATT + Awareness + Skill means you might Live To Ride another dayComment
Comment