Carburetor Thread

[Racing Hart]

Re: [UT]: Tuning your Motorcycle Carburettor.

They are available in mullick bazar I suppose I wil enquire and let you know accordingly

divyansh....

Thanks Divyan. Waiting for your reply

[kusmaker]

Re: [UT]: Tuning your Motorcycle Carburettor.

When it comes to rust it always finds it way into the metal or onto the metal nothing can stop it, (like corruption in our country hehehe),

[SparKot]

Re: Carburetor Thread

Do any of you guys follow "Plug Chop" procedure to tune carburetor using a new spark plug?

Plug chop - MopedWiki

[Divyanshp150]

Re: Carburetor Thread

Do any of you guys follow "Plug Chop" procedure to tune carburetor using a new spark plug?

Plug chop - MopedWiki

Damm,:P
Seems a little intense ehh? Seems fun
But I cant try it, dont have such nice open roads
And I think its tooo much work.
Cant we use the pollution guys to test the exhaust gases while we adjust the carb according to their readings?

divyansh....

[SparKot]

Re: Carburetor Thread

...
Cant we use the pollution guys to test the exhaust gases while we adjust the carb according to their readings?
...

Then engine will be tuned to comply with emission standards.

We want optimal engine performance across RPMs (1/4, 1/2, 3/4, WOT) also complying with emission standards. PAIR/CatCon system takes care of most of the unburnt A/F mixture, doesn't it?

[Divyanshp150]

Re: Carburetor Thread

Then engine will be tuned to comply with emission standards.

We want optimal engine performance across RPMs (1/4, 1/2, 3/4, WOT) also complying with emission standards. PAIR/CatCon system takes care of most of the unburnt A/F mixture, doesn't it?

Damm
I didnt think of that:P
Hmmmm,
Makes me think there should be more ways ehh?
Also a little help can you tell me if my 2003 pulsars stock exhaust had a cat con? Its a little ot im sorry,
divyansh....

[SparKot]

Re: Carburetor Thread

...
Also a little help can you tell me if my 2003 pulsars stock exhaust had a cat con? Its a little ot im sorry,
...

I don't know buddy, check with guys on pulsar threads.

[Ishwor]

Carburator swap between bikes

My fz carburator is giving some trouble.There are scratches on the piston valve of carburator.

I am from Nepal and the carburator of fz costa 3 times more than that of apache.
My friend is using pulsar 150 carburator on fz
And says bike is doing fine.
So is it safe to go for carburator of other bikes which use..mikuni bs 26 carb which is stock carb of fz.

Atleast does the carburator valve piston of other bikes can be used on fz?
Sent from my Samsung Galaxy s3

[Valkyire]

Carb Tuning

Hi guys, is there a way to know if the engine is running lean or rich without checking out the spark plug? Asking because started using Motul 5100 10w50 on the RTR 180 recently. It feels very sluggish and jerky at times.

[Divya Sharan]

Re: Carb Tuning

Hi guys, is there a way to know if the engine is running lean or rich without checking out the spark plug? Asking because started using Motul 5100 10w50 on the RTR 180 recently. It feels very sluggish and jerky at times.

Approved and merged!

For quicker replies, you can post your queries in your bike's respective ownership thread.