Helmets

[Sird]

Re: Helmets

In my Ls2, this never happened in all these years. Not even once.

Don't they have hooks inside them for holding their position? Is it just inserted by the edges and left like that?

[AngadV]

Re: Helmets

Yeah chin cover issue is faced by me too. Will be mailing spartan pro gear soon.

I've already sent the mail to this effect as even I faced this issue. The reply I got:

"Thank you for getting in touch with us.*The construction of this and most other helmets are such that they tuck in the chin curtain and lower cheek pads into the rim of the shell. Because of the shape of individual heads, more friction is sometimes applied on the lower extremities of the padding while putting on and taking off the helmet causing them to work a little loose. This can happen even if the helmet is a perfect fit but normally if it's a little tight.

In such cases, a simple manual readjustment of the padding is required whenever you notice it has come loose. Much like you would tuck in your shirt.*😊

With warm regards"

I've had occasion to mail them apart from this too, they have a very friendly service when it comes to queries or exchanges.

[Chandan92]

Re: Helmets

I am using MT blade for around 6 months but haven't faced any issue with chin curtain. But yes inner sun visor gets loose every now and then which is irritating.

[AbiRam]

Re: Helmets

Hi Guys I have been using MT Mugello Helmet for about 3 months now and I have removed and cleaned the padding and visor 2 times, my concern is the visor is pretty hard to put it back once removed and spring snap on the helmet is little too tight to press and hold while fixing the visor. Since the Visor has small tabs that gets clamped to the snap i am worried that those tabs might break if I Frequently remove my visor for cleaning. Is it wise to remove the visor for periodic maintenance ? or is there another ways of cleaning them without removing? And please suggest me how often can we change the visor to a new one or when is the optimum time to replace the visor? I may sound noobish but suggestions can help.

Regards,
Abi

[deep97raj]

Re: Helmets

The lining of my MT Axxis is coming off. Earlier whenever I took off my helmet, the left side padding would come off as shown here. Due to this the adjacent lining is coming off. Any suggestions?

Common issue in all AXXIS models.
Even my friend who owns a Axxis Is facing the same issue.

Luckily this problem doesn't exist in my MT BLADE.

[Ajay Vishwanath]

Re: Helmets

Hello,

I have MT Axxis... looking for an upgrade..

https://www.spartanprogear.com/collections/helmets/products/mt-atom-race-evo-matt-helmet-grey

I know that the Revenge is highly regarded, that will be my second choice.. what do you think about the above helmet? I want something flexible so that I don't have to remove the whole helmet to just drink water or scratch my nose..

also, I wear glasses.. so yeah..

Thank you..

[AngadV]

Re: Helmets

Hello,

I have MT Axxis... looking for an upgrade..

https://www.spartanprogear.com/collections/helmets/products/mt-atom-race-evo-matt-helmet-grey

I know that the Revenge is highly regarded, that will be my second choice.. what do you think about the above helmet? I want something flexible so that I don't have to remove the whole helmet to just drink water or scratch my nose..

also, I wear glasses.. so yeah..

Thank you..

No one would really recommend a modular helmet when it comes to safety, so unless you're really keen on this one and have only low speed city usage, then only I would go for it. For a modular it seems to be as safe as it would get, but again, nothing like a full face. If you have any high speed or highway riding, definitely a full face.

Coming to the MT revenge, I have had both Axxis as well as revenge, and apart from the SHARP rating, you wouldn't really feel any difference to be quite honest. There's an improvement in build quality, although I found blade to be the most comfortable. In terms of an upgrade, if you have the budget, I would consider other brands like HJC too and not just MT.
PS I have specs too, you'll have to go to a shop and try the helmet on once to be sure, as mine didn't fit and I have to use contacts for it.

[maddiemaster]

Re: Helmets

THH T76 LED MODEL SUBSCRIBE TO CHANNEL GUYS

[Ajay Vishwanath]

Helmets

No one would really recommend a modular helmet when it comes to safety, so unless you're really keen on this one and have only low speed city usage, then only I would go for it. For a modular it seems to be as safe as it would get, but again, nothing like a full face. If you have any high speed or highway riding, definitely a full face.

Coming to the MT revenge, I have had both Axxis as well as revenge, and apart from the SHARP rating, you wouldn't really feel any difference to be quite honest. There's an improvement in build quality, although I found blade to be the most comfortable. In terms of an upgrade, if you have the budget, I would consider other brands like HJC too and not just MT.
PS I have specs too, you'll have to go to a shop and try the helmet on once to be sure, as mine didn't fit and I have to use contacts for it.

so basically axxis & revenge has the same shell (heard that kronos is a rebranded axxis) so I get the same shell in kronos at cheaper price - if yes - I'm picking kronos asap!! :P
no, flip up is not something I'm keen on - just an added convenience when I want to drink water when touring etc etc...

So other than MT (my fav & trusted) any what else do you suggest??

[SpeedyKol]

Re: Helmets

Fixed the lining and other stuff. Feviquick to the rescue! By the way, used the el cheapo ISI helmet for a day. Horrible is the only word that I can come up with.

[AngadV]

Re: Helmets

so basically axxis & revenge has the same shell (heard that kronos is a rebranded axxis) so I get the same shell in kronos at cheaper price - if yes - I'm picking kronos asap!! [emoji14]
no, flip up is not something I'm keen on - just an added convenience when I want to drink water when touring etc etc...

So other than MT (my fav & trusted) any what else do you suggest??

As far as I'm aware, there would be SOL and HJC to consider. I would go with MT over SOL, no doubt, but regarding HJC, why not look over some ownership articles? That would give you a better idea.
But mostly I feel that MT revenge/Matrix/Kre would be good depending on your budget.

[Ankitsingh007]

Re: Helmets

How are these SMK helmets?
Being recently brought into market by Indian manufacturer [emoji54]

[Nikesh_Sharma]

Re: Helmets

My bad experience with LS2 Helmet's spares..

That's really full of irritation. I understand your feeling bro as a bike ride lover. When something like that happen in a long ride, It feels like hell. I think, its most important kind of gear. Your head is the most vulnerable when it comes to accidents; whenever a biker falls off his bike, one of the first things which must be protected is your head.
I have recently purchased three Shark helmets from the High Note Performance, one for myself, another for my girlfriend and one for my best friend. They have diverse range made it easier to select. Shark Range of helmets is perhaps the best. It works great for me. Hope it helps a bit.

Cheers...!!

[raakeshchauhan]

Re: Helmets

That's really full of irritation. I understand your feeling bro as a bike ride lover. When something like that happen in a long ride, It feels like hell. I think, its most important kind of gear. Your head is the most vulnerable when it comes to accidents; whenever a biker falls off his bike, one of the first things which must be protected is your head.
I have recently purchased three Shark helmets from the High Note Performance, one for myself, another for my girlfriend and one for my best friend. They have diverse range made it easier to select. Shark Range of helmets is perhaps the best. It works great for me. Hope it helps a bit.

Cheers...!!

Thanks buddy!

[Sird]

Re: Helmets





Saw this few days back on Bachho motors website.
The graphics looks good and the price is also appropriate.

Any info on this ?