The Official Pune Offline Meet(G2G) Thread

[rohitlc]

As some of the demo instructors are not available for sometime "Lavasa Demo Ride" is postponed till further notice. Meanwhile keep reading Sport riding techniques, Twist of the wrist 1 / 2 , TOW is in files section of xbhp pune on FB.


G2G will be on Wed. 28th at Motocafe at 8pm.

[nav75]

Hi,
My questions:
1. Is it safe to replace a hub with another?
2. Should I go ahead and replace the whole wheel instead? In this case, is it possible for me to buy the hub and spokes and build it on my own?

For any of the above solutions, can someone guide me to a reliable shop where I can be sure of getting a good product.

1. Yes.
2. Since the rim is rusted (and if its deep, close to getting a hole - better replace the rim too). Yes, you can source all the parts and build on your own.
Bullet Rim, Hub and Spokes can be bought from Kewate Motors(stores Bullet parts only), Bhavani Peth.
To fit them all together, you can either visit a shop next to Bombay Scooters in Nana peth OR there is another good one near New English School on Tilak Road.

[shrinathrao]

Hi,

The rear wheel hub of my Machismo 500 has decided to give way after 40000 Kms of use and abuse.

One of the guys at my mechanic's workshop tells me that I can just get the rear hub replaced.
However, I have seen that the rim is also rusting from the inside.

My questions:
1. Is it safe to replace a hub with another?
2. Should I go ahead and replace the whole wheel instead? In this case, is it possible for me to buy the hub and spokes and build it on my own?

For any of the above solutions, can someone guide me to a reliable shop where I can be sure of getting a good product.

Thanks

40000 kms is called as decently good lived life for the rim mate and replacing the entire assembly including hub, rims and spokes are important, reason being if you put a new hub with old rim and spokes, the overall strength would not be as good as expected and dont be surprised if after some months/year time as seen in some cases of my friends they had to again replace the rim, spokes and hub.

Regarding mechanic there is a mechanic called aslam near shivaji nagar and he is a really good mechanic as far as experience of bullets go, may be you have to leave the bike for a day or so as he takes his time and does excellent jobs.

sorry guys couldn't come for dhaba G2G. Fellow NS owners how long it took to get bike's No.? showroom guy saying that mine will come on next Thursday... that would be almost 2 weeks

I think with TC number you can use for 15 days in city limits and in that time the number should come normally, but make sure you have insurance and other documents with you.

Has anyone been to nashik recently? Need an update on the road conditions from pune.to nashik

Phoenix --> ranjangaon --> nashik is a excellent road, but beware of crossings.

[Prathmesh Mahindre]

Guys m finally going for the wanderer ride tomorrow morning
NIBM to NIBM - Google Maps
thank you people for helping me

[Prathmesh Mahindre]

I aint scaring you buddy . If you are riding for first time on a long distance tour , I would suggest to take by bits and pieces. Rather than traveling all around solo. Get to know your bike well first , go on smaller tours of smaller distances . MSH4 should be a breeze , but traveling after dark may be a problem owing to route & road conditions. I personally do not suggest NH17 solo to any one who has not ridden on that route before ( Some may say its normal route , scenic etc. But I say based only on my personal experience )

Try to see if you can hook up with someone for the tour If going solo , I would suggest the following :

Day 01 : Pune -- lonavala -- khopoli -- pen -- kashid -- murud -- janjiri -- diveagar
Day 02 : Diveagar -- shrivardhan -- goregaon -- poladpur -- mahabi -- pune

I am not against driving long. In fact I do not even have much experience of touring on bike .

Cheers,
Pai

guys finally i m goin got the ride
NIBM to NIBM - Google Maps
thank you people for helping me

[siddharth_ZMR]

As some of the demo instructors are not available for sometime "Lavasa Demo Ride" is postponed till further notice. Meanwhile keep reading Sport riding techniques, Twist of the wrist 1 / 2 , TOW is in files section of xbhp pune on FB.

One request, lets try not to keep it on Sunday.... Loads of guys on Sunday morning riding on every line possible..... making it quite risky.... would request some other day..... Saturday or a public holiday may be....

[Traveller01]

@red_redemption: Last week I went taking the Nagar highway. The route was Viman nagar - Shikrapur - Ranjangaon - Supe - Ahmednagar - Rahuri - Shirdi - Nashik. The roads are super smooth till Nagar. The road after the toll naka before 30 km of Shirdi are rough patches & there is a bit traffic after the toll near the bridge as there is a new bridge construction going on the right side. The nagar route is smooth & straight unlike the Chakan route which has hill on offer & is shorter. Hope this will be helpful.

[amitmalve]

I went to Shirdi last week through Pune-Chakan-Manchar-Ale Phata-Sangamner-Shirdi. Here are the updates:

1. Pune-Chakan: Traffic, but good road - Four lane.
2. Chakan-Manchar: Few bad stretches in between, but not for very long. Two lane roads from here on.
3. Manchar-Ale Phata: Miles of good two lane, straight road and lots of trucks, so a lot of jostling for overtaking etc.
4. Ale Phata-Sangamner: Very good, no issues
5. Sangamner-Nashik: I dont know

Cheers!

6. sangamner-sinnar: good road, no issues
7. sinnar-nashik: road ok, but lot of traffic

[trustvishwas]

One request, lets try not to keep it on Sunday.... Loads of guys on Sunday morning riding on every line possible..... making it quite risky.... would request some other day..... Saturday or a public holiday may be....

Won't a public holiday would also attract lots of riders?

No sarcasm. Genuine query.

[AntiqueBlue]

Won't a public holiday would also attract lots of riders?

No sarcasm. Genuine query.

Personal experience, sunday and saturday attracts most riders. Public holiday attracts tourist crowd. And I would rather be in lavasa with more riders than tourist crowd.. :-/

[kartikpai]

guys finally i m goin got the ride
NIBM to NIBM - Google Maps
thank you people for helping me

Enjoy . Ride safe

[siddharth_ZMR]

Won't a public holiday would also attract lots of riders?

No sarcasm. Genuine query.

Sir, from what i have seen.... its a kinda tradition that Sunday has to be Lavasa.... i have observed this with xbhp n also RSA riders.... hence i said Public holiday.... not sure about the traffic condition on such day... but i guess it might be less....

Personal experience, sunday and saturday attracts most riders. Public holiday attracts tourist crowd. And I would rather be in lavasa with more riders than tourist crowd.. :-/

I dont agree to this.... Riders in your lane at speeds exceeding 60 are far more dangerous then tourist crowd at 40..... plus... a tourist vehicle is encountered just once but those senseless riders have to be dealt with in each lap which increases the risk.... and at least on this Sunday the no. of senseless riders was far higher the those who were riding within limits....

[AntiqueBlue]

Sir, from what i have seen.... its a kinda tradition that Sunday has to be Lavasa.... i have observed this with xbhp n also RSA riders.... hence i said Public holiday.... not sure about the traffic condition on such day... but i guess it might be less....


I dont agree to this.... Riders in your lane at speeds exceeding 60 are far more dangerous then tourist crowd at 40..... plus... a tourist vehicle is encountered just once but those senseless riders have to be dealt with in each lap which increases the risk.... and at least on this Sunday the no. of senseless riders was far higher the those who were riding within limits....

haha, i had different experience so different opinion , u were on black karizma right??? I mostly indulge myself with clicking pics. As far I saw this sunday, there were few who were constantly out of line not all...esp that fireblade guy..almost rammed into him

[vkavadia]

hello bhaiyon!

I'm looking for a 37 tooth rear sprocket for the bike.. Any idea if there's one on sale somewhere or if there's a 37 T that I can buy from a spares shop? AFAIK 220FI is the only one with a 37T..

[mahesh.2910]

shrinathrao, nav75, ROCKRZ -- Thanks for the advice and directing me to mechanics. I shall go ahead and replace the whole wheel (Probably with an 18")

Will have to wait for a bit though. Low finances