DIY FOR How To clean K&N Air filters
K&n Air-filters doesn't need to be replaced but proper interval we need to clean the air filters and we use to clean the air filters from k&n dealers but it is not advisable.
Always better to purchase K&N Cleaning kit and do it by ourselves .
Cleaning should be done in the interval of 5000km.
These instruction is applicable for all the types of k&N air filters.
Step 1: Remove the Filter from your Bike

Step 2:This is how it looks Dirty


Step 3: k&N Cleaning Kit


Step 4: Use cleaning spray to remove the Dirt and leave it to dry for 20min.

Step 5: Use normal water to clean the Filter and if the dirt not removed completely Repeat the step 4.

Step 6: Let it dry for 30 min and this is how it looks after cleaning

Step 7: Use k&N oil to apply gently all over the filter in a same direction.


Flip the Filter and do the same process and look for any places if the oil not present, just patch up.

This is how it looks after applied the oil.. That's it K&N is ready to roar for another 5000km

I Hope this helps for Everyone .
How to install K&N Follow the link http://www.xbhp.com/talkies/do-yours...01-pulsar.html
Cheers.



Congrats

Comment