Planning to fit HID in my 220, but I'm on a budget. How about this offer from this company?
Standard H7 HID Conversion Kit Standard H7 HID Conversion Kit,car lights [VVME-HKSH7-STD] - $39.99 : VVME.COM, Car Parts, HID KIT, Tattoo Kit, Ballast, Bulbs
-
There are generic LED replacements for pilot bulbs. However I have made a custom replacement from strips of LEDs. Whatever LED you install it must run on 12V.Originally posted by bright_sunny21 View PostLeave a comment:
-
hello dear,
a delhi based company who mfr. and deals in auto electrical parts have solution of your problem of HID. they are selling the HID for Bikes n Cars on very best rates to the xbhp ,xkmph,bcmtouring.com members. many of the members Buyed from them and enjoying the HId of high low beam in single Bulb on thier bikes. also good thing is that they are selling with one year free replacement warranty.the amazing thing is that they are showing the demo of HID on in water .its really coooooool and waterproof kits. please look at there videos and contact them once for your satisfaction. email shreeradheyimpexatgmaildotcom
see the below U tube
http://www.youtube.com/watch?v=ozSt-DM_GcY
http://www.youtube.com/watch?v=2SJqTX23pTY
Leave a comment:
-
by LEDs u mean the conventional LEDs??Originally posted by rahuldevnath View PostYes, I have changed my pilot lamps and rear number plate light to LEDs but Blue in colour. Actually it goes well with Blue backlit speedo!
Ofcourse it's difficult to source LEDs which have exact colour temp of HID. You can install White or Blue. I would recommend Blue since your bike is Black.Leave a comment:
-
Yes, I have changed my pilot lamps and rear number plate light to LEDs but Blue in colour. Actually it goes well with Blue backlit speedo!Originally posted by bright_sunny21 View Post
Ofcourse it's difficult to source LEDs which have exact colour temp of HID. You can install White or Blue. I would recommend Blue since your bike is Black.Leave a comment:
-
so have you changed the pilot lamps??
and can u suggest me some which can match the color of HID??Leave a comment:
-
Mine were slim ballast. There are two metal brackets which are part of the frame, just behind both the beams. I have secured them there.Originally posted by bright_sunny21 View Post
You can adjust the beams with the thumb screw RH of both the beams. I doubt that there are any difference in brightness, may be just because it's in a picture.Leave a comment:
-
where did u strap ur ballast??
also--
your low beam seems to be more focused concentrated and bright..
while mine spreads a lot and is(or seems) not as bright as yours..
which cam did u use to click the pics??Last edited by bright_sunny21; 06-20-2010, 11:30 PM.Leave a comment:
-
Wiring cut karne ki zaroorat nahi hai. just route the wires to HID's input,to the bike's bulb socket.Originally posted by sunny kalia View Post
- No I didn't require any sort of spacer. The metal holder inside the bulb mounts has to be adjusted slightly so that it holds the bulb more firmly. I believe in the video the car is D2S, where's as the kit is H7, hence the need for spacersOriginally posted by bright_sunny21 View Post
- And I had cut the rubber shrouds, and then stuck them with tape.. works.Leave a comment:
-
@ rahuldevnath
got RAYLUX 35w H7 6000k installed on my 220.
as u said there is no mods to be done,
i myself did the installation.
but did u require sum kinda packing(spacer) to make the bulb fit properly??
like the one shown in this video??
YouTube - DIY HID Xenon Install: Mazda 3 2003-2009
i placed the bulb perfectly in the socket but it moves a lot,
u can hold it n turn it arround.
will check the beam spread when it gets dark.
ALSO--
how did u manage to put back the rubber shroud??
did u cut it or just punch some holesLast edited by bright_sunny21; 06-20-2010, 07:21 PM.Leave a comment:
-
dear i ws mean to say agar h4 fit ho gaye to wiring ki cutting to nahi hogi na?Originally posted by rahuldevnath View Post
and wht about light same as h7?Leave a comment:
-
It's difficult to install a H4 into a H7, however a H7 can be fitted to H4, with compromises.Originally posted by sunny kalia View Post
Why?
First, H4 bulb is too huge to fit into a H7 holding unit.
A h4 bulb has 2 filaments, wiring is the least of the concerns.
You can try fixing the h4 bulb into the H7 mount with some jugaad, wiring is not an issue. If the bulb stays inside the h7 mount, you may get usable light.Leave a comment:
-
hey dude can u ask ur frnd tht how has he fitted h4 in high beam any cutting wiring? plz. help me out dudeOriginally posted by bright_sunny21 View PostAFAIK H7 is a direct fit..
but a frnd of mine says he has put in a H4 type bulb in highbeam.
dont know how he did it.
also sum HIDs shopkeepers say "220 pe H4 fit hai"(again dont know how
)Leave a comment:
-
AFAIK H7 is a direct fit..Originally posted by sunny kalia View Post
but a frnd of mine says he has put in a H4 type bulb in highbeam.
dont know how he did it.
also sum HIDs shopkeepers say "220 pe H4 fit hai"(again dont know how)
Leave a comment:
-
hey hello to my friends
can i use h4 hid in my pulsar 220 cause i hv with me extra thts why asking plz. help me out with i will b thxfull of ursLeave a comment:
Leave a comment: