Originally posted by Saurabh_spatil
View Post
-
Re: Honda Unicorn
Finally I got after lots of searching. If anybody want it pm meLast edited by babumon123; 07-23-2019, 06:45 PM.Leave a comment:
-
Re: Honda Unicorn
Can anybody post or give a link for downloading workshop manual for unicorn 150Leave a comment:
-
Re: Honda Unicorn
Hello Guys,
I am having honda unicorn 2011 model, as you guys know the 2019 Unicorn comes with ABS. So just was wondering will it be possible to install same on mine too. Any idea if its possible, what would be the cost of Kit and what modification needs to be done. I think Disk and front fork needs to be change to install the ABS kit.Leave a comment:
-
Re: Honda Unicorn
I have 2017 model BS4 Unicorn 150. is there anyway by which the exhaust note of this bike can increase? the stock bike seems way too silent.Leave a comment:
-
Re: Honda Unicorn
But a ring is seen below the air filter.Originally posted by sreejesh613 View PostLeave a comment:
-
Honda Unicorn
But it should be anywhere between 1.75-2.5 turns.Leave a comment:
-
Re: Honda Unicorn
Usually just the filter is replaced. That ring sits on the air box I thinkOriginally posted by babumon123 View PostLeave a comment:
-
Re: Honda Unicorn
It would be better to change oil and seal if you think the oil has gone bad/is too old. Change your fork dust seal also. Those fine scratches might not be a problem.Originally posted by babumon123 View PostLeave a comment:
-
Re: Honda Unicorn
Also can you tell the factory number of turns of the air screwOriginally posted by sreejesh613 View PostAFR mixture screw have two O rings, a spring and a metal washer.
Check in the carburettor cavity where you insert the screw for the metal washer. It could be stuck there.
Attaching two pics of the screw along with its packaging.
Leave a comment:
-
Re: Honda Unicorn
Also should I change my front fork oil seal and fork oil. There is some light scratch lines in the suspension stem. Please see the attached pictureLeave a comment:
-
Re: Honda Unicorn
Also attaching unicorn spare parts link for anyone interested https://www.bike-parts-honda.com/hon...1/F_17/2/21309Leave a comment:
-
Re: Honda Unicorn
Also sreejesh613 can you confirm that is there a O-ring or gasket in air filter?? Please see the attached pictureOriginally posted by sreejesh613 View PostAFR mixture screw have two O rings, a spring and a metal washer.
Check in the carburettor cavity where you insert the screw for the metal washer. It could be stuck there.
Attaching two pics of the screw along with its packaging.Leave a comment:
-
Re: Honda Unicorn
Thank you very much brother. In my case there is only one o-ring. I think some mechanics fiddlled with. I will buy a new one. Thanks for posting the price alsoLeave a comment:
Leave a comment: