Info: Spark Plugs

[:':captain:':]

1800/-........wat d f__......??
is it advisable to spend dis amount....??

[sam92]

how much kms u done wid APACHE??/
any defects till now?? any !!
my dry-shaft oil seal is leakin,,within a month !!
n wat high speed u attained wid it till now??

even mine leaked .. got it replaced .
i touched 135 max

1800/-........wat d f__......??
is it advisable to spend dis amount....??

its not thats why i opted out

[Joel]

2.kn filter .. well even i wanted to for it but as few said that it may ruin the engine i opted out

Its surprising, u've got the wrong suggestions. World over K&N is used in dirt racing and all kinda terrain where the conditions are more punishing than your road scene. Do those engines get ruined? Race engines are more sensitive to dust and dirt. U just need to jet it right to avoid leaning the engine too much.

@ - I'd suggest u use the stock plugs for optimum performance during all weather conditions. Or, if u insist just use the NGK CR8E. Will just help run ur engine a bit cooler.

[sam92]

Its surprising, u've got the wrong suggestions. World over K&N is used in dirt racing and all kinda terrain where the conditions are more punishing than your road scene. Do those engines get ruined? Race engines are more sensitive to dust and dirt. U just need to jet it right to avoid leaning the engine too much.

@ - I'd suggest u use the stock plugs for optimum performance during all weather conditions. Or, if u insist just use the NGK CR8E. Will just help run ur engine a bit cooler.

i am using the same one
btw ,.. i enquired many places they said i have to istall the filter directly to my carb .. my doubt is there are 2 more pipes going from the airbox .. what will happen if i remove it ?

[:':captain:':]

i can feel the acceleration[as i own a old model] and millege has been increased by 5km/lt
think about the airfilter

spark plug cost 550Rs per piece
and KN RC1060 cost 1800 here in HYDERABAD

after openin of NGK INDIA(PRIVATE) LIMITED,, d same spark plug which costs 500 or so,, will cost now approx 200..

[:':captain:':]

Its surprising, u've got the wrong suggestions. World over K&N is used in dirt racing and all kinda terrain where the conditions are more punishing than your road scene. Do those engines get ruined? Race engines are more sensitive to dust and dirt. U just need to jet it right to avoid leaning the engine too much.

@ - I'd suggest u use the stock plugs for optimum performance during all weather conditions. Or, if u insist just use the NGK CR8E. Will just help run ur engine a bit cooler.

CR8E is tradiotional SP,,so is deir any point changin my stock BOSCH UR5DD((0.6mm spark tip)) wid dese one...
n NGK make CRE7IX, which is IRIDIUM SP,,,m thinkin of installin dis one...
which is more advisable...

[:':captain:':]

i am using the same one
btw ,.. i enquired many places they said i have to istall the filter directly to my carb .. my doubt is there are 2 more pipes going from the airbox .. what will happen if i remove it ?

OHH,,techical problem?? NO PROBLEM......
a friend of mine doin AUTOMOBILE ENGINEERING from CANADA,,,''a scientist till now in automobiles''........i'll ask to it....

[:':captain:':]

i can feel the acceleration[as i own a old model] and millege has been increased by 5km/lt
Think about the airfilter

Spark plug cost 550rs per piece
and kn rc1060 cost 1800 here in hyderabad

hay, can u pls tell me,, part number of the spark plug....i'll fix the same..:d

[sam92]

hay, can u pls tell me,, part number of the spark plug....i'll fix the same..:d

its CR8E1X

BTW dont post continuos like this or else you will have a word from the mods ..

[onlinesatish]

@joel

the only reason which is keeping me away from using a K&N,

We fix the filter directly to the carb. Wat if water enters into it? And more over jetting it right is going to be a headache....u know trial and error method. and to be frank i dont know how to find the perfect jet size!

Any suggestions on this? Is it really worth the pain of doing this mod on the bike or is it better to leave it stock and have a peae of mind?

[surajram]

We fix the filter directly to the carb. Wat if water enters into it? And more over jetting it right is going to be a headache....u know trial and error method. and to be frank i dont know how to find the perfect jet size!

Yeah water might get into it... But if you think logically, if the water can get into your K&N, It can also get into your stock Air Box.
Theoretically, Air & Water are both fluids and if one can get into the filter, so can the other. So irrespective of K&N or Stock, It is the duty of the rider to maintain your filter dry.

Any suggestions on this? Is it really worth the pain of doing this mod on the bike or is it better to leave it stock and have a peae of mind?

If you wanted a peacefull ride, then the RTR is not for you :P

[Aparajith]

@joel

the only reason which is keeping me away from using a K&N,

We fix the filter directly to the carb. Wat if water enters into it? And more over jetting it right is going to be a headache....u know trial and error method. and to be frank i dont know how to find the perfect jet size!

Any suggestions on this? Is it really worth the pain of doing this mod on the bike or is it better to leave it stock and have a peae of mind?

I have used the K&N for a really long time. Its simpply not worth it. In our puny single-cylinder machines, u wont get any huge performance improvement. Moreover jetting it and tuning it is such a pain.... If u really fancy the sound, then go ahead!

[Joel]

@joel

the only reason which is keeping me away from using a K&N,

We fix the filter directly to the carb. Wat if water enters into it? And more over jetting it right is going to be a headache....u know trial and error method. and to be frank i dont know how to find the perfect jet size!

Any suggestions on this? Is it really worth the pain of doing this mod on the bike or is it better to leave it stock and have a peae of mind?

I'm one of the first guys to start using the K&N. I've been using them since early 2004. I know what differnce it has made with the right jetting.
I have always only mounted the filter directly on the carb. I can vouch for the difference what a well jetted freeflow filter set-up can give.
My Fiero would not run without a freeflow filter, and the carb mounting were radical that I cant use a stock air box anyways.
Also I have seen differences close to 1bhp on my Fiero 200.
U can use it if u can make it work, else stick to stock.

[xperto]

HELP: Spark Plugs For 220

hi bikerz... i mean 220 bikers.. am Wasim and i own a 220 which has done 6600kms and is a year old.. i want to change my spark plugs for better performance.. i have no idea as in which one to go for.. i would like ppl to suggest me for the best spark plugs available in the market.. if possible with the model number.. Thank you

[surajram]

i am using the same one
btw ,.. i enquired many places they said i have to istall the filter directly to my carb .. my doubt is there are 2 more pipes going from the airbox .. what will happen if i remove it ?

I am guessing that these are breather pipes. And will not cause a problem as long as u leave them connected to the Air Box even if the Air Filter fits onto the Carb Directly.

I am not sure about this though. Can someone confirm?