Air Filters - Universal Thread

[coolmaverickguy]

Which is the best for Pulsar 150 Dtsi

K&N R-1100 or
K&N RC-1060

does re-jetting mean only adjusting the jet or putting a new one and normally whats is the size of the jet in 150 pulsar & if i upgrade it, which size & company should i go for


Cheers

[Dogg]

Which is the best for Pulsar 150 Dtsi

K&N R-1100 or
K&N RC-1060

does re-jetting mean only adjusting the jet or putting a new one and normally whats is the size of the jet in 150 pulsar & if i upgrade it, which size & company should i go for


Cheers

go for the rc1060..more than enough..
u could fit it directly to the carb or use a small extention...
and abt the rejetting,it is a must - start with a +1 jet size and go up...
most propably a +2 jet size must be enough...

[Dogg]

I have fitted KRP Exhaust charger on my Pulsar 180 DTS-i V1..Plannig to install K&N filter but now a bit confused regarding that....I need your advise..

1)Should i go for K&N and then Re-jet the Carb...
OR
2)Should i just Re-jet my Carb..As i have already installed KRP exhaust charger...

Is it really worth to go for K&N...I already have installed..
1.Both NGK iridium plugs (500+500=1000).
2.Low resistance silicon cable (650).
3.KRP exhaust Charger (4850)..

Need advise.........

go for the k&n and rejet... along with ue ffe and high flow filter with rejetting u will definately get ~2 bhp with some engine work

[HydBiker]

go for the k&n and rejet... along with ue ffe and high flow filter with rejetting u will definately get 2~4 bhp +

It is a P180 and not a multi cylinder 1000cc + engine to gain such 2-4 BHP increase with just those mods... gaining more power isn't so easy.

[coolmaverickguy]

Can u explain a bit more about jet size plz as i couldn't get it

[Coplay@180]

Hi guys,
I serviced my bike at the castrol bike zone yesterday and I rejetted my carb's main jet yeterday to the ZMA's jets. Ooops... I ride a P180 UG3 with K&N Rc1060. I wanna talk and question a lot about it but I'm too sleepy for today at work and i have clicked a few pics of the Pulsar's and ZMA's jets which i will be able to post only tomorrow.
please bear with me till then.. until then wish me good nite..!!!

[Srijan]

Can anyone suggest me a good airfilter for scooty pep?? I dont know much about filters. Your inputs with model numbers etc would be very helpful.

[themadrussian]

@ gain 2-4 bhp

all you can get is somewhere around 0.4-0.5 bhp increase
nothing more than that

[kunjalsingh]

can some one suggest me the sir filter for cbz(old model)..now a days i am using karizma's air filter...

[Binoy]

Guys planning to put K&N air filter for my FZ16. anybody has done it?
and how is it(increase/decrease in mileage etc. and also power). which air filter is suitable for yamaha FZ16?
can K&N R-1100 suits my bike?
pls suggest...

[anirudh fz1]

Hi guys,
I serviced my bike at the castrol bike zone yesterday and I rejetted my carb's main jet yeterday to the ZMA's jets. Ooops... I ride a P180 UG3 with K&N Rc1060. I wanna talk and question a lot about it but I'm too sleepy for today at work and i have clicked a few pics of the Pulsar's and ZMA's jets which i will be able to post only tomorrow.
please bear with me till then.. until then wish me good nite..!!!

can u just increase air/fuel ratio using screw in carb insted of re -jetting,

[Dogg]

Guys planning to put K&N air filter for my FZ16. anybody has done it?
and how is it(increase/decrease in mileage etc. and also power). which air filter is suitable for yamaha FZ16?
can K&N R-1100 suits my bike?
pls suggest...

wat r u expecting from the k&n???

[Binoy]

wat r u expecting from the k&n???

I am expecting a more top end speed and an increased performance, but may be a 3-4 decrease in mileage(not more than that)...

[dual disc 200]

I am expecting a more top end speed and an increased performance, but may be a 3-4 decrease in mileage(not more than that)...

Dude, more top end speed needs sprocketing and stuff, just by adding a K&N will not give u any performance change except the roar!! that will make people think OMG what a sound!!. U have to do Up-jetting also for the mixture to be rich! or else ur' fuel mixture will be lean and u'll be even more slower than the other FZ's!!!!

[Binoy]

Dude, more top end speed needs sprocketing and stuff, just by adding a K&N will not give u any performance change except the roar!! that will make people think OMG what a sound!!. U have to do Up-jetting also for the mixture to be rich! or else ur' fuel mixture will be lean and u'll be even more slower than the other FZ's!!!!

thanx dual disc... if i have done the upjetting and what can i expect mileage from my bike... my average mileage is 40... how much less in terms of mileage and gain in performance?