The Official Hyderabad Offline Meet(G2G) Thread

[onlinesatish]

Were you alone or did anyone join u? And which place did u explore today?

[ravi@17bhp]

Were you alone or did anyone join u? And which place did u explore today?

I was alone. Its Ananthagiri route that I did two weeks back. The places are more and more deeper. Found superb landscapes today and I was told many shootings took place there. The weather was lovely and chilly. Simply superb!

I seriously missed the wide angle. It is high time I upgrade my shooting gear.

[riazmomin]

Awesome place Ravi...
I am going to this place coming sunday! Thats for sure? Care to join?


new handle looks great.

BTW..where are the pics of Narsapur G2g?

[furioussphinx]

did u check the following places?

-minister road
-lower tankbund
-KIMS and ahead.. towards sec-bad and those areas..

Dude, you are referring to car accessory shops, let alone modification. They might talk heights about mods but if you listen up then your being taken for a ride. No offence but yeah you do have a couple of rare good mechanics like my mech in lower tankbund but somehow I still prefer going further down south like I said.

ya but.. i just thought that there might be any bike mod shops.. at least 1 or 2 hidden there..

oh and i know of 1 place where they do good stickering job..
its near manju theater complex.. they do a good job for modding ur bike's looks.. like i did mine.. ill post some pics of my bike soon.. you will get a fair idea..

i modded my bike honda unibaby 2005 to a good looking hotrod bike ^_^
its just similar.. i did some homework and took the designs to him and he did it.. but its costly.. it cost me 1000 bucks.. just the left-right-top of fuel tank.. the visor.. and the front tire mudguard.. sad that i didnt maintain it really good.. got scratches at some places.. still its looking cool there.. you must maintain it like a burning candle in open area with rain.. really careful..

Do post the pics up, would love to have a look at your bike

Did some serious off-roading...

Who needs tractors!

The other day me and Vinu sat through a brief little photoshoot of his monster baby Ill wait for him to share the pics

[MadMax46]

This might be a Old News but I was watching CNBC Today and one of the News goes like this:
"Honda is all set to take over Hero Motors by capturing the 100cc market. Soon a 100cc bike would be launched which would be priced below 30,000. And Honda is all set to launch CBR250 which would be a competition to Hero's Karizma"

Yeeee kinda old news but cnbc being the source definitely adds value !

I want to do a proper burnout.. i do it in my apartment's cellar.. its cement flooring (its like blocks) and the tyre really dies out.. there is a lot of jerking.. less smoke.. can you please tell me how to do it correctly.. btw i searched google and all that crap.. i need pro advice..

Be ready to shed out money fr new rubbers and if you still wanan go ahead, good luck. post the query in the stunting section you might find more takers there.

Hi Ajay - there was a nice trail until a cpl of yrs back behind trimulgery - let me check if I can give you the google map co ordinates. not sure if it still is usable cause last I heard about it, there was some construction etc about to begin there -

there is a brand new apartment/commercial complex almost ready to be occupied.

Lol that shop is a big joke lol. I saw it when I bought my 200 like ages back. Stupid cheap ass body kits and shady job. I wouldnt suggest anyone to go there. If you really want serious mods, take the extra step and head down to coimbatore or blore... worth the effort. Sadly hyd doesnt have serious modders yet. Regarding gear, I got a call from Ritesh and now they have their shop somehwere in madhapur.

lol exactly. me and atul went there and were like what the heck is this ? Satish and Kp posted about the shop and i went hunting all being hopeful Adventure on the rocks has moved to Hi tc city few months back. I have been there couple of times, latest i heard Ritesh has got few latest LS2 models available for sale.

Nice weather for a cool ride. I am planning to ride today. If anybody interested can call me on 96188 44123.

I was awake till 7 am. errrr Ravi anna, u posted this half an hour into ma sleep. errrr.....saw the pics , as usual kick ass exploring

such a nice drizzle in the city.. wish i could have a race.. FullThrottleRace (FTR) :P

@hydbiker then in that case.. i wont do a burnout.. oh and btw ssup with wheelie?? is it ok for the engine??

FTR ? yaaawn !! Dude, please avoid posting multiple times. stick and adhere to the forum rules.

did u check the following places?

-minister road
-lower tankbund
-KIMS and ahead.. towards sec-bad and those areas..

Nothing but 4 wheels and more four wheels. Do not fall into their trap and nice pep talk about 2 wheels

Headlight update:
On saturday, tried wirings using one projector.
Got a H3 55W bulb for Rs 60/- (test purpose bulb from Ministers Road, will get better ones whole setup is successful) and plonked it to project and connectoed to paralell sockets on the stock socket, yippe it worked and the low-beam spread is great.

So using two projectors will dry out the batter in couple of minutes. Coil rewinding is must now and DC is still optional.

Coming to the fairing design, I need to pick up the side fairing parts from P135 and the projectors holder from P220 headligt casing.

Already prepared the skeleton design for holding all this stuff and welding jobs is required.

Its a plug-in setup that I have planned, mean I can any time remove the modded setup and shift too the stock fairing when ever I want as the stock skeleton will be there and will remain same.

looking forward to this, do put some pics up or even better bring one on the DIY section

oh and i know of 1 place where they do good stickering job..
its near manju theater complex.. they do a good job for modding ur bike's looks.. like i did mine.. ill post some pics of my bike soon.. you will get a fair idea..

i modded my bike honda unibaby 2005 to a good looking hotrod bike ^_^
its just similar.. i did some homework and took the designs to him and he did it.. but its costly.. it cost me 1000 bucks.. just the left-right-top of fuel tank.. the visor.. and the front tire mudguard.. sad that i didnt maintain it really good.. got scratches at some places.. still its looking cool there.. you must maintain it like a burning candle in open area with rain.. really careful..

As per my opinion that manju theater decal guy or any otha decal guy in town are pretty much basic stuff. they can just do basic outline and cutouts and i kinda stay away from them. Do post few pics of your Uni !

I seriously missed the wide angle. It is high time I upgrade my shooting gear.

Buy it anna, upgrade it asap

Dude, you are referring to car accessory shops, let alone modification. They might talk heights about mods but if you listen up then your being taken for a ride. No offence but yeah you do have a couple of rare good mechanics like my mech in lower tankbund but somehow I still prefer going further down south like I said.


The other day me and Vinu sat through a brief little photoshoot of his monster baby Ill wait for him to share the pics

+1 for the mods bit. Last week my shipment from Uk arrived with Rossi original merchandise (cap, bag stikers etc) So i decided to pep up my bike a few decals and thnx to Sagar , did an amazing little photo shoot in the garage. Sagar, ma respekt fr ua clikin skill set jus got a big wide boost

Here are a few :-

[ajay_vishvanathan]

My Babe...

The pics are taken during evening time..

ill take some more pics during day time as well and post them around today or tomorrow

[Sri]

Cool pix Vinu... bike looks awesome with the decals... n gr8 clicks, Sagar...!!

[bikersunny]

HI.......friends..how is everyone and sandeep? how are you bro. how is your leg and hand now.. are you okey.. and when shall we go for our next long drive..

[kiran_borra]

@Sagar: Amazing Clicks man...
At the first glance, I thought that they were some wallpapers

@Vinu: Your bike looks cool now brother...

@Riaz: Good going brother... I am very much looking forward to see your final setup...
Please let me know If i'd be of any help

[furioussphinx]

+1 for the mods bit. Last week my shipment from Uk arrived with Rossi original merchandise (cap, bag stikers etc) So i decided to pep up my bike a few decals and thnx to Sagar , did an amazing little photo shoot in the garage. Sagar, ma respekt fr ua clikin skill set jus got a big wide boost

Chill maadi! Thanks to u, I got my lazy ass out with the camera after ages and clicked some shots. I thought they werent upto the mark but now looking back at them, some are actually wallpaper material

Cool pix Vinu... bike looks awesome with the decals... n gr8 clicks, Sagar...!!

Thanks Sri

@Sagar: Amazing Clicks man...
At the first glance, I thought that they were some wallpapers

@Vinu: Your bike looks cool now brother...

Thanks Kiran

Here are a few more :P Hope you guys like them

[ravi@17bhp]

Awesome place Ravi...
I am going to this place coming sunday! Thats for sure? Care to join?

new handle looks great.

BTW..where are the pics of Narsapur G2g?

I would love to ride that side, as I have more places to explore. The vegetation is changing very fast and would like to explore as soon as possible. But, this Sunday, I may go to Vijayawada. If not, I am definitely riding, even without you!

Narsapur pics? What about you? You posted only very very few.

Furious Sphinx, at last, our ProGrapher wakes up! Nice clicks there.

Vinu Dear, where is my pendrive??

[ravi@17bhp]

Washboy, He took just Rs 5/- for washing our bikes. Complete VFM. You can see him there every sunday

Ha.. ha.. ha.. I am better than you. Before I started my business, you were washing only for 2 rupees per bike. I earned 5 rupees.

BTW, awesome clicks there.

[yaser_kb100]

Ha.. ha.. ha.. I am better than you. Before I started my business, you were washing only for 2 rupees per bike. I earned 5 rupees.

BTW, awesome clicks there.

hmmmmm so U guys have found nice parttime weekends jobs haan

[Sri]

Yippeee....!!!! Received the reinforcements from korea for my baby in just 10 days... hurrayy....!!!! Indian Customs guys showed me some mercy this time n gave clearance in just 4 days... (my previous order took 20 days just to get the customs clearance) lol

Stuff ordered this time...

1. Gold o-ring drive chain --- ₨.2,755.13
2. Front Sprocket ---------- ₨.747.82
3. Rear Sprocket ----------- ₨.1,495.64
4. Engine Sprocket NUT ----- ₨.196.80

Shipping to IN (1 x 4.00kgs) : ₨.1,680.63
-----------------------------------------
Sub Total ------------------ ₨.6,876.02

Paypal n transaction charges :Rs.718

Customs Duty --------------- Rs.1308
-----------------------------------------
GRAND TOTAL --------------- Rs.8902
-----------------------------------------

Here r the pix...

[kkrk2]

......
CBR250... hmmm... just for coparison sake, CBR250 is in the league of Ninja250 and not with the ZMA. Expect the CBR250 to be around 3.5L to 4L range - above the Ninja - thanks to Honda's step-motherly treatment to Indians by pricing their products much higher here. If they don't do it, it would be a wonder.
.....

If a CBR250 is priced on par with ZMR (forget the ZMA!!) It will be called as BONDA not a HONDA!!