The Official Hyderabad Offline Meet(G2G) Thread

[ajay_vishvanathan]

I want to do a proper burnout.. i do it in my apartment's cellar.. its cement flooring (its like blocks) and the tyre really dies out.. there is a lot of jerking.. less smoke.. can you please tell me how to do it correctly.. btw i searched google and all that crap.. i need pro advice..

[riazmomin]

I have one casing(and even the projector itself).It may be useful for you.
If you need it,let me know.

It will be usefull for me, I would be needing the casing that holds the both the lamps. Give me your number, Will call you..

@ Riaz

What exactly are u planning to do with 220's headlight? I have a couple of them but iam working on them for increasing the low beam spread!

Check this http://www.xbhp.com/talkies/510844-post93.html

This might be a Old News but I was watching CNBC Today and one of the News goes like this:
"Honda is all set to take over Hero Motors by capturing the 100cc market. Soon a 100cc bike would be launched which would be priced below 30,000. And Honda is all set to launch CBR250 which would be a competition to Hero's Karizma"

CBR250??? Do consider it before thinking of ninja

Headlight update:
Bought two Skoda projectors for Rs 400., but they need H3 bulb.

[ajay_vishvanathan]

Help!!!!!
anyone knows any place near secunderabad where i can do some trials.. say some nice clean ground (not O.U it sucks..) please.. tell me..

[yaser_kb100]

Help!!!!!
anyone knows any place near secunderabad where i can do some trials.. say some nice clean ground (not O.U it sucks..) please.. tell me..

Hi Ajay - there was a nice trail until a cpl of yrs back behind trimulgery - let me check if I can give you the google map co ordinates. not sure if it still is usable cause last I heard about it, there was some construction etc about to begin there - btw you mean it for a motorbike? or a real bike?

how is the wobbling etc part of your bike now? did you get the bushes of the rear shocks checked? even they can cause the wobbling also check the bushes of the swingarm.

do you have a lot of tyres? why do you want to burn them until you see all the smoke and stuff? thatz not good for the tyre - I know I am sounding old but you shud not do it with a regular tyre - OMG did you realise that an improperly worn tyre could also be the cause of the wobbles? maybe the tyre itself is in a bad shapre and needs to be replaced.

though the burnouts etc look good in pics etc, I only used to do them in the mud, very very very rare on tarmac or hard surfaces. I am not trying to discourage but then if you have only one bike then... I would prefer preserving it. But yes back in my days, I used to do the burnouts just before replacing the rear tyre after I had brought the new tyre already

[rahul9985]

Check this http://www.xbhp.com/talkies/510844-post93.html

Headlight update:
Bought two Skoda projectors for Rs 400., but they need H3 bulb.

Nice idea.. Very much possible. Aren't the skoda projectors too big? Mind you, H3's are expensive bulbs.
Well.. I read your post. You don't necessarily have to do DC conversion. You can still run them on AC but with same or worse light spread (incase you keep same rating bulbs) OR better spread if you plan to upgrade the bulbs (with its own pros and cons).
If you plan to use DC bulbs, you can take a direct supply from the battery itself and can route the existing headlight cables to battery.

In any case just make sure the projector is the right one for your purpose, or you might end up with something you never wanted!

[HydBiker]

KP looks like Dawood Ibrahim in the pic...

Bingo... that's exactly what I felt. Please make sure these pics don't get into the hands of CID. They will start hunting for me then.

"Honda is all set to take over Hero Motors by capturing the 100cc market. Soon a 100cc bike would be launched which would be priced below 30,000. And Honda is all set to launch CBR250 which would be a competition to Hero's Karizma"

Honda and under 100cc? I seriously doubt if they can launch a CD100, Boxer, Star equivalent at that price. Just think about it. Even the ones I named here cost 33K & above and how come Honda would sell even a moped under 30K? forget it. Looks like people forgot about the over priced Twister and Dazzler with nasty plastics and patheticly finished welding on metal parts.

CBR250... hmmm... just for coparison sake, CBR250 is in the league of Ninja250 and not with the ZMA. Expect the CBR250 to be around 3.5L to 4L range - above the Ninja - thanks to Honda's step-motherly treatment to Indians by pricing their products much higher here. If they don't do it, it would be a wonder.

I want to do a proper burnout.. i do it in my apartment's cellar.. its cement flooring (its like blocks) and the tyre really dies out.. there is a lot of jerking.. less smoke.. can you please tell me how to do it correctly.. btw i searched google and all that crap.. i need pro advice..

Statutory Warning: Burnout is injurious to your bikes health.
PS: Attend some G2G and our guys would be more than willing to help you with that.

Headlight update:
Bought two Skoda projectors for Rs 400., but they need H3 bulb.

H3 bulbs are super cheap and you get it every auto spares shop. Rs 40 MRP and they can give you ar Rs 35 too... It is almost as common as H4 now a days. You get H3 is 55W at most places but you also have options like 40W and 90W.

[kiran_borra]

Honda and under 100cc? I seriously doubt if they can launch a CD100, Boxer, Star equivalent at that price. Just think about it. Even the ones I named here cost 33K & above and how come Honda would sell even a moped under 30K? forget it. Looks like people forgot about the over priced Twister and Dazzler with nasty plastics and patheticly finished welding on metal parts.

CBR250... hmmm... just for coparison sake, CBR250 is in the league of Ninja250 and not with the ZMA. Expect the CBR250 to be around 3.5L to 4L range - above the Ninja - thanks to Honda's step-motherly treatment to Indians by pricing their products much higher here. If they don't do it, it would be a wonder.

He he you are Right KP...
Even I feel the same...
But hearing to the News from CNBC just gave it some weight...

[MadMax46]

@MadMax46: Looks like you love these places! You should have got an RX&modded it to look like MotoX instead!
But how come your canvas shoe soles are still sparkingly white even after the mud fest that the bike went through?

Hellya..i do neva been a 2 stroke fan,,,no way ! Sneaks are sparklin white cos dey gt drenched in d water ,,,heh eh heh

@vinu

kirkiri.....nice merchandise anna...! and is the place somewhere near madhapur?

PS - when are getting ur 220 registered?

Thnx anna yes it is close to madhapur. its already registered and got the rc too, just too lazy to put the number up

been seeing it for about 3 weeks now. wanted to check witn you guys but I hardly came online. Do you know any more info abt it?

A lot of people have been talking about this new store opened up in tadbund x road next to exide outlet. made a visit to the place yesterday, must say...not even worth mentiong. atleast not untill now. called KS custom Designing, and on the billboard says dealers of yoshimura, proton, krp, custom mag wheels etc......dey dont even have a single piece in handy. there were few k&n filters and sum cheap looking helmets. thats about it. no jackets, no exhausts, nothing. spoke to the owner Sridhar, he says they are into custom bodykits and showed few pics of the bikes they have sone. all similar to what we see in ramkoti. I say thumbs down nd a big no no as of now.

[furioussphinx]

A lot of people have been talking about this new store opened up in tadbund x road next to exide outlet. made a visit to the place yesterday, must say...not even worth mentiong. atleast not untill now. called KS custom Designing, and on the billboard says dealers of yoshimura, proton, krp, custom mag wheels etc......dey dont even have a single piece in handy. there were few k&n filters and sum cheap looking helmets. thats about it. no jackets, no exhausts, nothing. spoke to the owner Sridhar, he says they are into custom bodykits and showed few pics of the bikes they have sone. all similar to what we see in ramkoti. I say thumbs down nd a big no no as of now.

Lol that shop is a big joke lol. I saw it when I bought my 200 like ages back. Stupid cheap ass body kits and shady job. I wouldnt suggest anyone to go there. If you really want serious mods, take the extra step and head down to coimbatore or blore... worth the effort. Sadly hyd doesnt have serious modders yet. Regarding gear, I got a call from Ritesh and now they have their shop somehwere in madhapur.

[ravi@17bhp]

Nice weather for a cool ride. I am planning to ride today. If anybody interested can call me on 96188 44123.

[ajay_vishvanathan]

such a nice drizzle in the city.. wish i could have a race.. FullThrottleRace (FTR) :P

@hydbiker then in that case.. i wont do a burnout.. oh and btw ssup with wheelie?? is it ok for the engine??

[ajay_vishvanathan]

Lol that shop is a big joke lol. I saw it when I bought my 200 like ages back. Stupid cheap ass body kits and shady job. I wouldnt suggest anyone to go there. If you really want serious mods, take the extra step and head down to coimbatore or blore... worth the effort. Sadly hyd doesnt have serious modders yet. Regarding gear, I got a call from Ritesh and now they have their shop somehwere in madhapur.

did u check the following places?

-minister road
-lower tankbund
-KIMS and ahead.. towards sec-bad and those areas..

[riazmomin]

did u check the following places?

-minister road
-lower tankbund
-KIMS and ahead.. towards sec-bad and those areas..

Those areas are meant for Cars right?
He was speaking about proper two wheeler mods.


@Ravi
Its was excellent weather yesterday, but I more enjoyed it sleeping till noon and then on Playstation.

Headlight update:
On saturday, tried wirings using one projector.
Got a H3 55W bulb for Rs 60/- (test purpose bulb from Ministers Road, will get better ones whole setup is successful) and plonked it to project and connectoed to paralell sockets on the stock socket, yippe it worked and the low-beam spread is great.

So using two projectors will dry out the batter in couple of minutes. Coil rewinding is must now and DC is still optional.

Coming to the fairing design, I need to pick up the side fairing parts from P135 and the projectors holder from P220 headligt casing.

Already prepared the skeleton design for holding all this stuff and welding jobs is required.

Its a plug-in setup that I have planned, mean I can any time remove the modded setup and shift too the stock fairing when ever I want as the stock skeleton will be there and will remain same.

[ajay_vishvanathan]

Those areas are meant for Cars right?
He was speaking about proper two wheeler mods.

ya but.. i just thought that there might be any bike mod shops.. at least 1 or 2 hidden there..

oh and i know of 1 place where they do good stickering job..
its near manju theater complex.. they do a good job for modding ur bike's looks.. like i did mine.. ill post some pics of my bike soon.. you will get a fair idea..

i modded my bike honda unibaby 2005 to a good looking hotrod bike ^_^
its just similar.. i did some homework and took the designs to him and he did it.. but its costly.. it cost me 1000 bucks.. just the left-right-top of fuel tank.. the visor.. and the front tire mudguard.. sad that i didnt maintain it really good.. got scratches at some places.. still its looking cool there.. you must maintain it like a burning candle in open area with rain.. really careful..

[ravi@17bhp]

Exploring continues....

Did some serious off-roading...