Bajaj Pulsar 150 2010 version - Page 7 - xBhp.com : The Global Indian Biking Community

tanay · 02-21-2010, 01:53 PM

^ I had seen the new 150, and my idea was that its clip-ons could be used on the older pulsars as well, as they have the same fork size.

Then I went to the Karol Bagh PBK and asked one mechanic. He says the forks of the new 150, the old 180 and 200 are the same diameter at the top or the rod part while they differ at the bottom, i.e the cylinder part.

Now, this may not be conclusive. But it suggests that such a mod could be done with convenience. I agree that the 150 clip-ons don't look so good.

Fitting the 180/220 clip-ons will require the full front fork assembly change which would cost ~6-7K?

Does not matter much to me. I'm keeping my bike stock.

praji · 02-22-2010, 12:15 AM

how abt the p135 ls..clip ons ..?? those look much better .....and as far is i know ..both ls and 150 have a similar fork setup so they can be easily ported to old 150/180!!
and as tanay said if the rod part is same then maybe on 200 also but i guess itl screw up the riding position !!

abhichotu.abhi · 02-26-2010, 11:58 AM

Hey guys, I saw today a RED 150 with CLIP-ON's and guess about the quality, one of the clip-on bars was broken due to the owner had a fall.

02-21-2010, 01:53 PM	#61 (permalink)
tanay ♪♫♪♫♪♪ Join Date: Oct 2008 Location: Kolkata Posts: 697	^ I had seen the new 150, and my idea was that its clip-ons could be used on the older pulsars as well, as they have the same fork size. Then I went to the Karol Bagh PBK and asked one mechanic. He says the forks of the new 150, the old 180 and 200 are the same diameter at the top or the rod part while they differ at the bottom, i.e the cylinder part. Now, this may not be conclusive. But it suggests that such a mod could be done with convenience. I agree that the 150 clip-ons don't look so good. Fitting the 180/220 clip-ons will require the full front fork assembly change which would cost ~6-7K? Does not matter much to me. I'm keeping my bike stock. __________________ ****

02-22-2010, 12:15 AM	#62 (permalink)
praji 7bhp to 18bhp Join Date: Apr 2009 Location: bangalore Posts: 132	how abt the p135 ls..clip ons ..?? those look much better .....and as far is i know ..both ls and 150 have a similar fork setup so they can be easily ported to old 150/180!! and as tanay said if the rod part is same then maybe on 200 also but i guess itl screw up the riding position !! __________________ *Four wheels is transportation. Two wheels is attitude.*

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Photo Feature]: Spotted: Bajaj Platina LPG version!	dual disc 200	News	34	09-30-2010 02:39 PM
[NEWS INDIA]: Bajaj-KTM 125, 250 & KTM 690s releasing in Auto Expo 2010.	Samarth 619	News	78	02-26-2010 11:40 PM
[NEWS INDIA]: Bajaj Vehicles To Get Expensive from January 2010	ketan_r15	News	1	12-22-2009 11:10 AM
Bajaj Pulsar 350	lakshman teja	News	1	08-06-2009 06:09 PM
[What Bike]: 2009 Version Pulsar 220/ ZMA/ Pulsar 220 FI?	dhairya	What Bike?	49	06-25-2009 11:53 PM

02-26-2010, 11:58 AM	#63 (permalink)
abhichotu.abhi Senior Member Join Date: Jun 2009 Posts: 2,494	Hey guys, I saw today a RED 150 with CLIP-ON's and guess about the quality, one of the clip-on bars was broken due to the owner had a fall.

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules