Tweet
Re: Share Your Creativity (Bike Modification)
self made frame slider
self made frame slider
-
-
Re: Share Your Creativity (Bike Modification)
Hello bikers!
Here are a few pics of my creation
Attached FilesComment
-
-
Re: Share Your Creativity (Bike Modification)
Very nice! Jagjit ji please let me know about the panniers and the rack for it. What's the price of these and where did you get these? Will it be ok to fit it on FZ for tours? Thank you in advance.Originally posted by jagjit_singh View PostComment
-
Re: Share Your Creativity (Bike Modification)
Looks dope!Originally posted by Nash29 View PostHello bikers!
Here are a few pics of my creationComment
-
Re: Share Your Creativity (Bike Modification)
thanks for like bro,,, it's from rideongears you can search it online,, & contact them by call,,,Originally posted by Nucleus View PostsigpicComment
-
Re: Share Your Creativity (Bike Modification)
Hi All
I have compiled all the modifications on my Benelli TNT 300 to a video
Please look into it and share your thoughts.
Its better to sweat than to bleed...Comment
-
Re: Share Your Creativity (Bike Modification)
to buy some stuff for my bike, I went to Kurla market mumbai, there I have seen this Hero Splendor modified as Scrambler.
Last edited by vkclick; 11-18-2017, 04:13 PM.Visit my Photo Blog - www.vkclicks.com
My YouTube Channel- https://www.youtube.com/channel/UCVM...gtEqcKEPjoF2lwComment
-
Re: Share Your Creativity (Bike Modification)
That's not a splendor. Xtreme or hunk.Originally posted by vkclick View Postto buy some stuff for my bike, I went to Kurla market mumbai, there I have seen this Hero Splendor modified as Scrambler.
HYPERTHRUST CLEARED AND COUNTING
5.....4.....3....2.....1
sigpicComment
-
Re: Share Your Creativity (Bike Modification)
Originally posted by kaushik12041985 View Postself made frame slider
hey dude...
how good this bolt ??
you are using CNC bolt or handle bar bolt..
anyway size is 8mm right?Comment
-
Re: Share Your Creativity (Bike Modification)
So I had modded my 150, the donor bike was a ug 2 with the ug 3 alloy wheels. I had modified as following;
The first being attaching a splendour set up in the front with its rims running 2.75-18 in the front and 3.00-18 at the back
The other modification as you can see above is the p220 pegs and brake lines taken from the new 180 [ this was before the 150 twin disk came about. I did this as the original mounting places lost their threads. Further at the back you can see the local shock absorbers, [ apparently used in the rx100’s but I am not questioning]
On the other side you can see that I have attached the RTR 180 kick to compensate for the new foot pegs and adjusted the rear brake pedal accordingly. Again you can see the right hand case has been taken from a new pulsar as I had lost the old one because it cracked. This has both the inspection window and the dip stick. Notice that the old cover plastic for the batt box is not compatible with the new pegs and the lower half had to sawed off and that the other one is a knockoff of the newer one [ the left hand side]
So these are the mods that I have done if anyone wishes to do the same.
What I am concerned about is whether I can run 3.00-18 tyres both front and back. I really want to standardise the sizes and that I can get the meaty offroad ones in 3.00 -18 config and not the 2.75-18 so often.
Comment
-
Re: Share Your Creativity (Bike Modification)
Guys...any place in bombay to modify a bike, except the kurla market...any place on the southern part?Comment
-
Re: Share Your Creativity (Bike Modification)
Hello friends,
My name is Hitesh and i am from Patiala, Punjab. Me and my friends are currently working on a bobber project. For that purpose we need a wide rim(spokes) to fit a wide tyre at rear, which we are struggling with currently, i have considered Ali express for importing the size i want but the ratings and price say it wont worth it. So can anybody help me with finding a right rim within the country ?
the rim here is for representational purposes only
the maximum size available is 3inX18in from a RE classic in which i could fit only 120 width of tire.
Attached FilesComment
-
-
Re: Share Your Creativity (Bike Modification)
Try searching for stock rear wheels from bigger cruisers available in India.Originally posted by Hitesh Harry View PostComment
-
So 2 months ago I started a I started this project. I basically took a fully rusted, siezed engine, no gear peddled, no kick starter, HERO HONDA GLAMOUR 125. I was planning time make a care racer but later decided it was too cliche and everybody was doing it anyway. So I decided to go for a classic bobber. Changes a lot of things and hand built much of them, But here are the results......
feel free to ask or suggest anything as the project is still going on... Next stop new side panels...
@pbmodss
#pbmodss #neverslowdownAttached FilesComment
-
Comment