Announcement

**kinshuk.arya** · 03-03-2010, 03:17 AM

hey guys,

uploading some pics and designs for FZ.... pls comment and suggest...

**Roadfreak** · 03-04-2010, 01:50 AM

Originally posted by Roadfreak View Post

Hello Puneet!

I will make a basic post of this in the thread as well!
Separating the dome of the FZ from the clear glass is a rather easy task:
Things you will need to separate the dome:
1. A Oven(not microwave)
2. Leather Gloves.

Method:

Take the headlight assembly and remove all wires, screws, specially the stickers behind (eg, QC PASSED)
Now take a Aluminum foil and place it on the tray of the oven and place the headlight assembly on it.
light up your oven and close the Lid.
Set your timer or stop watch to 7 minutes and wait near the oven while the process takes place to make sure nothing goes wrong.
Once its 7 minutes wear your gloves and switch the oven OFF and carefully take your headlight assembly out and place it on a clean cloth or a cardboard.
Now with one hand pull the locks up and pull the headlight dome and the clear glass apart, you will notice it comes out easily and quickly, do this till you remove and completely separate the dome from the clear glass.
Install your angel eyes. (DO NOT USE SILICON or ANY TYPE OF GLUE TO STICK YOUR Angeleyes, it will severely damage the dome)
best thing to make the angeleyes sturdy is to drill 3 small holes in such a place that once the angel eyes are fitted, the holes will be hidden.
Use the top 2 holes to secure the wires and the lower hole to pass a small fishing line( fishing line is a transparent type of high strength thread, which is used for fishing) lollz (sorry that was funny)
Once secured, connect your angel eyes to the parking light connection and CHECK (you will be sorry if it does not light up later after fitting it back inside)

Fixing back the Dome to the Clear glass

Method:

1. Take the dome and put it in the oven and light up your oven and keep the dome inside for 1 minute to 1'30" maximum.
2. Carefully after cleaning, place the clear glass on it and press till the locks "tick" in place.
3. Allow it to air cool for 30 minutes.

That is how I installed my angel eyes, I hope this answers all your questions about installing the eyes by your own!

Any more queries or biking problems, I'd be glad to help if I have knowledge about it!

Regards,

Roadfreak!

This may be useful!

**Roadfreak** · 03-04-2010, 02:03 AM

And this is how an angel eye(halo ring) looks...

**kinshuk.arya** · 03-04-2010, 02:15 AM

Originally posted by Roadfreak View Post

And this is how an angel eye(halo ring) looks...

where can i get one of these???

**ganeshkumar** · 03-04-2010, 09:32 AM

Fitted engine neon

My bike look so koool now any comments guys..

**gotlo** · 03-04-2010, 12:56 PM

Originally posted by ganeshkumar View Post

Fitted engine neon

My bike look so koool now any comments guys..

looks straight outta NFS

ubercool !

**hypergamer** · 03-05-2010, 05:57 AM

DIY please

**tigersyndicate** · 03-07-2010, 12:59 AM

Modification your motorcycle (share)

okey,, because i'm a pulsar user,, there are many pulsar not looks standart in My country Indonesia,,
I want to share in this thread, about modification of your motorcycle,, what did you do with your pulsar??? I want to see another modification motorbike model, especially pulsar in india,, so,, don't forget to give picture in this thread,,

okey,, for the beginning,, I will give example picture about pulsar in my country..
this is my Friend's Motorcycle,, his name is dono,, here is the pict.

what about your Pulsar??? Or APache Maybe...

**Aryan** · 03-07-2010, 03:35 AM

Topic Merged.

Neatly modded Pulsar that! I would love to know more about those front dual disc setup. Those discs look huge! Also, what lid is that?

**tigersyndicate** · 03-07-2010, 09:28 PM

Originally posted by Aryan View Post

Topic Merged.

Neatly modded Pulsar that! I would love to know more about those front dual disc setup. Those discs look huge! Also, what lid is that?

okey let's me explain as long as i know,, for the front section,, this pulsar is using CBR 400 rims in front n rear,, cbr 400 using double disc in front, left n rigth,, the disc brake is originally from cbr 400 too. and for aplication this wheels is not too hard, but i don't know specifictly how to apply this rims into pulsar 200.. I sill have many my friend's pulsar in my country.. hehehe

**tigersyndicate** · 03-07-2010, 09:52 PM

Originally posted by sonu_buell View Post

Check yhis 180 out,its got a suzuki tail

sorry this is my friends bike.. from indonesia..
correct me if i wrong..
you can chek in here..

Page not found – Prides OnLine

http://www.prides-online.com/viewtopic.php?f=14&t=5840&sid=71281c6ed140b5dc65f88e481a29d8c5

his name is ricky

**neon** · 03-08-2010, 09:48 AM

Originally posted by tigersyndicate View Post

This Bike looks sooo Cool

!!! i few pics of Indonesian Modified Puslar i downloaded from Internet i like this bike with rims & Disc's ,, i wonder if i can get it in India/Mumbai.

**neon** · 03-08-2010, 09:53 AM

Originally posted by tigersyndicate View Post

sorry this is my friends bike.. from indonesia..
correct me if i wrong..
you can chek in here..

Page not found – Prides OnLine

http://www.prides-online.com/viewtopic.php?f=14&t=5840&sid=71281c6ed140b5dc65f88e481a29d8c5

his name is ricky

In the page abve... the Red Pulsar looks so good !! m in love.. doesnt any body know any1 in Mumbai who can provide these mods on Pulsar.

i have pulsar 180DTSi 2004 model, with round headlights

**csajal** · 03-08-2010, 11:20 AM

Originally posted by Aryan View Post

Topic Merged.

Neatly modded Pulsar that! I would love to know more about those front dual disc setup. Those discs look huge! Also, what lid is that?

Aryan Da.... I know a guy in Delhi who is a genius with Disk Mods... he has moded a FZ-16 with Dual Disk front, single disk rear!! Pretty awesome stuff.... I've ridden that FZ and as he said.... I could brake with single hand at a speed of arround 80kmph.... the bike is that stable.... believe me!!

here's the link for the pics on my Blog -> FZ of Sorts

P.S. - Sorry for posting the link from my blog... as I didn't had the pictures of the FZ on my machine any more and the link way was faster!! Pardon me for the link as I know this is something not encouraged in Xbhp

**csajal** · 03-08-2010, 11:34 AM

Originally posted by tigersyndicate View Post

sorry this is my friends bike.. from indonesia..
correct me if i wrong..
you can chek in here..

Page not found – Prides OnLine

http://www.prides-online.com/viewtopic.php?f=14&t=5840&sid=71281c6ed140b5dc65f88e481a29d8c5

his name is ricky

Well pal... your friend has got some taste towards modifications

Announcement

Share Your Creativity (Bike Modification)

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment