Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Avoid staying around those big vehicles.

Our Partner

Announcement

Collapse
No announcement yet.

help me to improve my electricals

Collapse
X
Collapse
 
  • Page of 12
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 7 8 9 10 11 12 template Next
  • #166
    Guys der is a serious problem in my Pulsar 200 DTS-i (2008 Model). Recently i had changed total electricals of the bike including Digital console, BCU, both left n right switches, RR unit, Stator coil n wiring harness. The problem is that while running, the small bulbs of headlight, meter lights n L-R Switches light starts flickering even when the light switch is off. I again changed the right switch thought that it would be the main cause of da issue but, then also same problem exists. The sai service guys are also not able to make out the exact problem of it. Please Help.

    Comment

    • #167
      Originally posted by shoaib786 View Post
      Guys der is a serious problem in my Pulsar 200 DTS-i (2008 Model). Recently i had changed total electricals of the bike including Digital console, BCU, both left n right switches, RR unit, Stator coil n wiring harness. The problem is that while running, the small bulbs of headlight, meter lights n L-R Switches light starts flickering even when the light switch is off. I again changed the right switch thought that it would be the main cause of da issue but, then also same problem exists. The sai service guys are also not able to make out the exact problem of it. Please Help.
      i think the problem is with bcu so please get it checked by putting other pulsar bcu in your bike
      Give your details help a biker stranded in your city.



      2015 January Tvs Jupiter 28000kms and counting

      Comment

      • #168
        Originally posted by rprathin View Post
        i think the problem is with bcu so please get it checked by putting other pulsar bcu in your bike
        Thanks bro.. Il get it checked n let u know soon.

        Comment

        • #169
          Originally posted by rprathin View Post
          i think the problem is with bcu so please get it checked by putting other pulsar bcu in your bike
          Just changed da BCU & the bike is running perfect till now with no flickering of lights. but, when the meter socket is connected it starts misfiring n bike stops after some time.. Pls. suggest some solution.

          Comment

          • #170
            Originally posted by shoaib786 View Post
            Just changed da BCU & the bike is running perfect till now with no flickering of lights. but, when the meter socket is connected it starts misfiring n bike stops after some time.. Pls. suggest some solution.
            check your pm i had replied on the same
            Give your details help a biker stranded in your city.



            2015 January Tvs Jupiter 28000kms and counting

            Comment

            • #171
              Re: help me to improve my electricals

              hello guys,
              please help me to convert my pulsar 150 ug2 from 35w to 55/60w. I know this is a very old topic and a lot of information is available in threads.
              But My head is spinning from all the information overload.I'll be simple in my inquiry.

              I need to get avenger 180 coil(dv111005),but it is not available in my city.So can i use avenger 200's coil(jm111002). If yes do i need to change the rotor too?
              If i finally get to the coil,will i need a relay to connect to the headlight,What in the world is a relay?

              Somebody help me out of this nightmare.
              DON'T ARGUE WITH AN 6 WHEELER.

              Rajdoot 175
              Pulsar 150
              Yamaha RX 135 -sold
              Mahindra rodeo
              Yamaha RXZ 4s

              Comment

              • #172
                Re: help me to improve my electricals

                Originally posted by deepanpandiaraj View Post
                hello guys,
                please help me to convert my pulsar 150 ug2 from 35w to 55/60w. I know this is a very old topic and a lot of information is available in threads.
                But My head is spinning from all the information overload.I'll be simple in my inquiry.

                I need to get avenger 180 coil(dv111005),but it is not available in my city.So can i use avenger 200's coil(jm111002). If yes do i need to change the rotor too?
                If i finally get to the coil,will i need a relay to connect to the headlight,What in the world is a relay?

                Somebody help me out of this nightmare.
                There are many links here which guide you step-by-step. But honestly it is really not worth the efforts. I am sorry if I sound discouraging. However you could try much brighter bulbs like OS NB+, Phillips EV.

                Hope you already gave it a try!
                My DIY(s) - Sprocket bearing change | Paint job | Custom speedo dial

                Getting angry at somebody is the same as getting angry with a bike that just won't go. You should stop and start thinking.
                A good mechanic will let you watch even without charging you for it. |
                It is funny to know that we've been imitated and copied so well                 and surprising when we notice our mistakes are copied as well.

                Comment

                • #173
                  Re: help me to improve my electricals

                  Originally posted by petrolhead_chn View Post
                  There are many links here which guide you step-by-step. But honestly it is really not worth the efforts. I am sorry if I sound discouraging. However you could try much brighter bulbs like OS NB+, Phillips EV.

                  Hope you already gave it a try!
                  thanks petrolhead.but will nightbreaker or extra vision run on 35/35w?
                  DON'T ARGUE WITH AN 6 WHEELER.

                  Rajdoot 175
                  Pulsar 150
                  Yamaha RX 135 -sold
                  Mahindra rodeo
                  Yamaha RXZ 4s

                  Comment

                  • #174
                    Re: help me to improve my electricals

                    Originally posted by deepanpandiaraj View Post
                    thanks petrolhead.but will nightbreaker or extra vision run on 35/35w?
                    Why not? Just check the capacity of your reflector. In rare cases the reflector or the headlamp fades due to heat. Moreover you could use a relay if necessary. All these are options. In my opinion you can use the Osram or Phillips easily without mods.Fellow BHPians should shed some light on it. Keep us posted.
                    My DIY(s) - Sprocket bearing change | Paint job | Custom speedo dial

                    Getting angry at somebody is the same as getting angry with a bike that just won't go. You should stop and start thinking.
                    A good mechanic will let you watch even without charging you for it. |
                    It is funny to know that we've been imitated and copied so well                     and surprising when we notice our mistakes are copied as well.

                    Comment

                    • #175
                      Re: help me to improve my electricals

                      Originally posted by petrolhead_chn View Post
                      Why not? Just check the capacity of your reflector. In rare cases the reflector or the headlamp fades due to heat. Moreover you could use a relay if necessary. All these are options. In my opinion you can use the Osram or Phillips easily without mods.Fellow BHPians should shed some light on it. Keep us posted.
                      a 35/35W reflector is capable of handling a 55/60W bulb.. the heat produced is moe, but not so much to deface the reflector..
                      go ahead a fir a 55/60W bulb without any mod..
                      Ride safe and have fun.
                      Regards
                      Nadeem

                      Comment

                      • #176
                        Re: help me to improve my electricals

                        Originally posted by deepanpandiaraj View Post
                        thanks petrolhead.but will nightbreaker or extra vision run on 35/35w?
                        There you go. From what our friend says above, you could go ahead. Keep us posted.
                        My DIY(s) - Sprocket bearing change | Paint job | Custom speedo dial

                        Getting angry at somebody is the same as getting angry with a bike that just won't go. You should stop and start thinking.
                        A good mechanic will let you watch even without charging you for it. |
                        It is funny to know that we've been imitated and copied so well                         and surprising when we notice our mistakes are copied as well.

                        Comment

                        • #177
                          Re: help me to improve my electricals

                          Thanks nadz11.ns and petrolhead.I didn't get your replies earlier.Anyway i found the avenger coil.Its installed and fitted with 60w bulb.It's better now.

                          Sent from my GT-S5830 using xBhp Connect mobile app
                          DON'T ARGUE WITH AN 6 WHEELER.

                          Rajdoot 175
                          Pulsar 150
                          Yamaha RX 135 -sold
                          Mahindra rodeo
                          Yamaha RXZ 4s

                          Comment

                          Previous 1 2 7 8 9 10 11 12 template Next
                          Working...
                          X
                          © xBhp.com 2026. All rights reserved.
                          Designed by xBhp