Re: TVS Apache RTR 180
Guy's!! Can handle bar of Apache 160 4v be installed in 180 2v???
-
Re: TVS Apache RTR 180
Old but Gold. I know this RTR 160/180 2v is almost obsolete but with TVS bringing out 160/180 FI BS6, it's better to have this manual if anyone wants the factory torque values.
Leave a comment:
-
Leave a comment:
-
Re: TVS Apache RTR 180
Your clutch is not disengaging.Originally posted by Droy9400 View Post
You need to pull the clutch cover off and inspect if all parts of the actuation mechanism are present as per your parts manual and properly fixed.
Especially Parts 14, 23 and 25, a thing to note is that there is a metal ball which is part of 25, please make sure that is present as well.
Regards,
A.P.Leave a comment:
-
Re: TVS Apache RTR 180
My insta handle is modifire2020Originally posted by Droy9400 View Post
I didnt get your msg bro..
Pls ping meLeave a comment:
-
Re: TVS Apache RTR 180
Mere rtr me slipper clutch fit aram se ho jata hai or 200 ka bearing bhi hai 6201Originally posted by Prashant Patil View Post
Sab fine hai pr ek hi problem hai ki
Clutch engagement ache se nahi hota usse koi bhi gear me idle rpm me clutch dabane k baad bhi wheel ghumti rehti hai or age jati rehti hai idle speed me or gear shifting bht hi hard ho jata hai
mai 1yr se try kr raha hu problem solve hi nahi kr pa raha hu
maine tumko insta me dm kiya tha check karo bhaiLast edited by Droy9400; 05-03-2020, 10:49 PM.Leave a comment:
-
Re: TVS Apache RTR 180
Originally posted by Droy9400 View Post
Visit my channel u ll get all your problem releted slipper clutch problemLeave a comment:
-
Re: TVS Apache RTR 180
hi guys ,
i have tried to install the rtr 200 slipper clutch on my rtr 180
my rtr is a bs4 model, here what i am facing issues with it
other bs3 models of rtr 180 are running on slipper clutch flawlessly
can anybody help me with it how can i fix the issue
the video link is shared below plz chck
Leave a comment:
-
Re: TVS Apache RTR 180
My friend that is a very costly affair, for that you might need so many changes from whole electrical to mechanical. You need to understand how Fuel injection works, it takes inputs from various sensors. Some of these sensors are installed on various parts of engine so that also might need some modifications to accommodate those. If you somehow get those modified than the reliability would be a concern, instead you can get the parts which involves some modifications replaced to the bs6 model than this will make a big hole in your pocket.Originally posted by pranav_salieri View Post
Speedometer and its connector must me different in the bs6 due to Malfunction lamp.
Silencer has oxygen sensor, engine temperature sensor, fuel pump in fuel tank, Maf/map sensor in air filter assembly, difference in regulator/rectifier, wiring, Ecu, etc..
If you really need a Fuel injected motorcycle you might be better of selling this one and getting the updated bs6 model.Leave a comment:
-
TVS Apache RTR 180
Injector will cost you upto 9000/-Originally posted by pranav_salieri View Post
Battery at max 1500/- by exchanging old.
Wiring harness 2000 to 3000.
Rest all I have no idea.
Cold stars issues can be rectified with fine tuning the carb. Jerky acceleration can be due to cable play. Slight play in accelerator cable can be the reason.Last edited by TarunSundar; 04-22-2020, 02:30 PM.Leave a comment:
-
Re: TVS Apache RTR 180
so how much will it all these cost approximately? i was planning to get it done because i have experienced issues with bad cold starts on the carb and the throttle response being jerky from time to time.Originally posted by TarunSundar View Post
If the cost is too much i might refrain from this project.Leave a comment:
-
Re: TVS Apache RTR 180
All those parts you mentioned has to be changed and battery, alternator and electrical wirings with fuses. No need to change the bore and piston. Even no need to touch the engine.Originally posted by pranav_salieri View Post
But what was the need for this process.Leave a comment:
-
Re: TVS Apache RTR 180
Originally posted by TarunSundar View Post
Thanks for your reply. what part changes are we looking at ? also how much would be the approximate cost?
I am guessing a new Fuel Pump , Oil cooling unit, FUel injection Kit ,ECU, Exhaust (Inclung Catcon_) and wiring will need to be changed. WIll have to change the bore and piston as well?Leave a comment:
Leave a comment: