Announcement

**hayaz_xlr8z** · 11-22-2011, 10:18 PM

15. Ktm branding on crankcase
16. RTR-like grab rails
17. Pointed rear seat
18. Hidden exhaust!!

**sambit** · 11-22-2011, 10:19 PM

whats the thing under the tank??
is it liquid cooled???is that the radiator???
or just a fancy expansion??

**2strokerama** · 11-22-2011, 10:22 PM

Originally posted by payeng View Post

Just checked out the 200 Duke. The Design of the Alloys and tank on the Duke and the new Pulsar that is seen in the pics is in fact different..!! The 200 Duke's tank is sharp and edgy, from the spy pics the new Pulsars tank seems to be more smooth and round.

Is it? I cant tell. But thats one proper ball buster, where the tank and seat meet.

The front disc looks to be lifted off KTM too.

**payeng** · 11-22-2011, 10:23 PM

Originally posted by sambit View Post

whats the thing under the tank??
is it liquid cooled???is that the radiator???
or just a fancy expansion??

That's the last thing that I would like to see. i.e a decoy/plastic appendage trying to ape a radiator cover. Hope it is not so.

**nagoo** · 11-22-2011, 10:48 PM

Originally posted by 2strokerama View Post

Nice! The KTM 125s were probably stripped to make the pulsar.

Where's the exhaust?

Originally posted by saurabhp View Post

i think its the only 150cc model that they r testing
but where is the exhaust???

Originally posted by hss View Post

I am surprised to see same pulsar like taillight. I was expecting bigger changes.

Originally posted by spikester View Post

Where's the exhaust ?
I don't even see the smaller exhaust like that of KTM !
The head light and tank design is similar to that of a Pulsar 135

Originally posted by Krish1417 View Post

Where is the exhaust

Atleast in KTM we could see the exhaust pipe,where is it placed?

Originally posted by sandeep_vgl View Post

There is something partly visible under the rear seats. The exhausts?

check all the pics on both bikes .. something is bumpy in midway of the tail section inside , just above the tyres.. i too assume its underseat exhaust [just a guess]

Originally posted by sukant08 View Post

The most hideous thing I have seen today!!
With the monoshock, the rear swingarm is looking rather weird n skinny. The front fairing is non existant, which is weird for a pulsar !!

Originally posted by Nithesh View Post

Am i the only one to notice the KTM Duke styled fuel tank and side cowl?

Originally posted by eliksir View Post

Am i the only one that liked the looks ?

its looks good , after removing all the camouflage, .. the tank seems to be much bigger compared to any pulsars

Originally posted by easy rider View Post

I don't think this is the complete pulsar. They could just be testing the engine and the mechanicals and so they've sent the bikes out with just its basic body parts and not the complete bike. They could have also just thrown on the p135 side indicators on for now so that they could still keep some suspense about the bike. But I'm really disappointed that they did not come up with a new brake lamp design, the present one is quite boring now.

Brake lamps are best compared to any japs till date.. and ur feeling boored coz, ur seeing it daily

Originally posted by raghu_scsa316 View Post

Ugliest swingarm ever.

all i can say is its exact copy of R15 V1 swing arm..even the chain setting knob on the swingarm .. guess the same vendor may be providing these swingarms to both Yamaha and Bajaj now

Originally posted by payeng View Post

I like what I see too.

The bikes are heavily masked. Even the side and center body panels have some rexin like fabric stitched on to it..!! New design alloys, and chunky monoshock are welcome changes.

The tank looks humongous and am I looking at a real radiator cover or just a decoy like the FZ. Also I do not see a usual down tube frame... so Trellis Frame..??

Am getting a feeling that the new Pulsar would end up looking better than the KTM 200 Duke..!!

check the first pic with 3 bikes .. from the size its gonna be big bike for its class . and with good color scheme .. bike will look v.good

Originally posted by RanjithMN View Post

isnt the Pillion foot peg dangerously close to the riders?
anyway disappointed if its a 150cc

i hope they use the KTM engines for the premium & high capacity bikes rather than the daily commuters.

Yep,final product should be having some fiber parts along which make it look beefier.

why u bother about CC .. guess the power ..could be near to R15 range ,.. and yes pillion foot pegs seems to be close to rider foot in one pic ..in other its seemed ok

**Thunder** · 11-22-2011, 10:48 PM

It seems like the Indian Version of KTM200,,,, There is no identity of the Pulsar matching in this SPY Pics,,,,
Because Bajaj cannot simply copy the same design of KTM in the Pulsar Models, there should be some difference in design of both bikes so it seems like it should be the KTM200 .....

But still Missing Rear discs, Missing Exhaust, Makes a Lot of confusion, Probably it should be a Engine testing not the Design,,,,,,,

**Sunjay Kumar** · 11-22-2011, 10:53 PM

IS this a Pulsar or KTM Duke
on the engine its written KTM racing
the alloys wheels are the same of duke
the front fender is the same of duke

Only the taillight is this old pulsar

**Ab13** · 11-22-2011, 10:59 PM

we have seen the duke spy shots before this is the next gen pulsar.. bajaj has to price it under ktm therefore no upside down fork and rear disc( i can understand no upside down fork.. BUT NO DISC

) bike looks handsome to me just add some tech AND DON'T STEEL KTM'S ENGINE...make your own..

**spikester** · 11-22-2011, 11:01 PM

Originally posted by nagoo View Post

check all the pics on both bikes .. something is bumpy in midway of the tail section inside , just above the tyres.. i too assume its underseat exhaust [just a guess]

The tail part is completely covered and I don't see any provision given for the exhaust gases to go out there

**sabret00the** · 11-22-2011, 11:14 PM

nice things coming our way.

Two observation:-

1) The rear footpegs and the front rear sets are too close for comfort.
2) The seating and the rear sets positioning demanded a more lower mounted clip on handlebars. Atleast thats what looks to me from the pics.

**satheez_7** · 11-22-2011, 11:33 PM

Same KTM Engine in new pulsar series..interesting

..then what could be the displacement..The only thing which force us to think this one as lower cc is that rear drum brake(why?). Rest of all looks like premium and could be 200cc.
Regarding foot pegs distance, those are in right distance IMO..only that riders placed their legs near to pillion foot pegs, so that the distance looks very short.
No trellis frame so we can conclude it as pulsar..
Any way, i dont like same LED light in new series..BAJAJ could have done it in new look..But surely this one will be good looker because of its size..HUGE..
Waiting for more spy pics....common guys

..

**kantu** · 11-22-2011, 11:46 PM

Originally posted by spikester View Post

The tail part is completely covered and I don't see any provision given for the exhaust gases to go out there

If both side shots were taken we could have come to conclusion , since many features are that of Duke may be exhaust is also near stand but on other side (which is weird) or its not at all there

(eco friendly perhaps

sticking to some new BS X rule

)

**jigar2speed** · 11-23-2011, 12:09 AM

Originally posted by Berlin View Post

at last bajaj testing the bikes before launch.....

so the first set of customers dont want to test it for bajaj....

And we have a thread funnies comment winner.

**antz.bin** · 11-23-2011, 12:12 AM

Methinks this is the new Pulsar 125. And there will be 3 of them.
P125
P200
P350

Now THAT would take some beating.

**anandsharma021** · 11-23-2011, 12:14 AM

Page not found - Bike India

http://www.bikeindia.in/news/what-is-new-in-1-5/658-new-pulsar-to-be-unveiled-this-december

Announcement

NexGen Pulsar to be launched on January 30, 2012!!!

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment