Helmets

[neo_31591]

hey from where can i get CROSS or LS2 or AGV helmets in CHANDIGARH!!!!somebody plssss reply!!!!

[manan_in_2000]

My new LS2
Bike : White ZMR
Cost: Rs 3200
Shop: Funkys, Bandra

Got exactly the same Helmet few days back from Chopra, Delhi

[pradeeme]

How about Vega helmets... like vega integra or the vega nbx ? need some insight in those

[worrisomebear]

@ mohsin i got the same hlemet for 3000 in bangalore ,how much you paid for it

i got it for 3200 brother..u got a zmr too bro..we dnt cu on the other zmr thread?

[sooraj_vs]

My Cross.
Quite comfy fit. Got it from JC road.

Quite sexy too.. How much..?

[intox_blitzx]

Guys, please tell me 2-3 reputed shops (and who don't over-qoute) in Hyderabad which stock LS2's n high end Vega helmets.

[jacob]

Guys, please tell me 2-3 reputed shops (and who don't over-qoute) in Hyderabad which stock LS2's n high end Vega helmets.

Hey u can check with on the rocks (9000509180- ritesh) i haven even seen few LS2 @ Biking termional at somajiguda

[intox_blitzx]

Hey u can check with on the rocks (9000509180- ritesh) i haven even seen few LS2 @ Biking termional at somajiguda

hey, thanx!

The LS2 helmets at 'adventure on the rocks' are sold out...he has only 2 pieces remaining!!

I heard Abids is the place 2 go for helmets...but not sure which shops r d ones to go to!

[jacob]

hey, thanx!

The LS2 helmets at 'adventure on the rocks' are sold out...he has only 2 pieces remaining!!

I heard Abids is the place 2 go for helmets...but not sure which shops r d ones to go to!

Yup but it might cost a bomb there, Check out BIKING TERMINAL i had been there few days back, seen a few LS2 and Vega helmets..... and do bargain to the last penny

[intox_blitzx]

Hehe, will surely do dat!!

[riyazitsme]

i got it for 3200 brother..u got a zmr too bro..we dnt cu on the other zmr thread?

@mohasin hey bro how r u, i will be reading all the post everyday but i dont post anything over there becoz you post there nobody is bother to replay the posts for example here isthe link , http://www.xbhp.com/talkies/desi-bikes/10422-karizma-zmr-ride-report-first-impressions-236.html#post432736 post number 2355 i have posted this one long time back but no reaply below that the person whom i was addressing he has reaplied to other posts but not mine little dispointed with that ,so stoped posting there any how no point posting you know you will not get the answers

[thefalcon]

Hey guys, i did some mods for my vega boolean.
The other day while removing the padding to wash it, i realized that vega people had actually drilled holes in the thermocol around those top air vents but they drilled it only halfway so the air vents were useless.. (poor finish quality by vega)

Anyway i took a light duty drill and completed the job.
I even tested it by wearing the helmet and using a vacuum cleaner on blower mode at the vents.. could feel the air flow

In the first pic, i first poked 4 needles from the front and back of the vents through the thermocol and marked the 4 points where they emerged inside.
Since the company drilled holes were little off, i took the halfway mark of those holes and took a detour to the mid point of the 2 points

In the second pic, could anyone explain why the thermocol is split in the bottom back part of the helmet ?? is this a flaw only with my helmet by any chance ?

[rvbhute]

Protective foam from helmet detached!

Hi all.

I have a Vega Eclipse 3/4th helmet. I wanted to wash its paddings so I removed the two pieces that cushion the cheeks and the padding that goes around the lower part of the head. I then noticed that the protective foam inside was loose - it moved at the tap of a finger. The cloth lining the inner upper part of the helmet was also coming unstuck. With a little effort, I managed to remove the foam completely from the helmet .

Attaching an image of the piece.

I applied Fevicol to the foam and have put it back in, but my confidence in the helmet is gone. Is it a fake Vega? I got it from AA Helmets in Goregaon on 20th April.

Is it OK for the foam to come off? And the inner lining? Can I continue to use it once I put it back together?

[Aryan]

Query Merged.

[sheelpriye]

i realized that vega people had actually drilled holes in the thermocol around those top air vents but they drilled it only halfway so the air vents were useless.. (poor finish quality by vega)

Anyway i took a light duty drill and completed the job.
I even tested it by wearing the helmet and using a vacuum cleaner on blower mode at the vents.. could feel the air flow

Since the company drilled holes were little off, i took the halfway mark of those holes and took a detour to the mid point of the 2 points

when they could drill half, couldn't they drill it full???

You have ruined your helmet and it shall not provide ample protection in the unfortunate event of a crash resulting in severe injury/injuries
get a new helmet ASAP

^^if you still have the helmet's box, then there should be a hazard warning in a leaflet, warning the same, it isn't even recommend to sticker one's helmet.

@rvbhute-- from the pic, it isn't clear about what is wrong with the helmet or whether it is fake, sorry bro