The Official Cochin Offline Meet(G2G) Thread

[Ayson]

Need some help guys. I want to buy a torque wrench. Does anyone there own one or has bought one from Cochin? Please advice me as to where i might find it there. Any large tools dealers or a tool shop area. Thanks.

[kochumvk]

btw saw a Porsche boxster in kadvanthra

cochi pazhe cochi alla....

ippazhate pillarokke entha kali....

but boxer have a very low ground clearance!?
our roads and fuel quality are not healthy for porsches and lambus..
Our fuel stations are not ready to supply Bharat stage 4 fuel??-- pathetic isn't it?

[BANDHAV]

Though i have no business here in Cochin thread but Boxter name get my attention, and when i came here i find that you guys are using thread in a manner its not supposed to be.

[kochumvk]

Though i have no business here in Cochin thread but Boxter name get my attention, and when i came here i find that you guys are using thread in a manner its not supposed to be.

Most of the active members here are pretty new. Will you please explain and guide us how we must do things here on this thread.

We cochin riders deeply regret on any abuse of the thread if happened .
Hope you will clarify the mistakes.It will be helpful if you can explain how the post should be.

Thanks Bandhav.

[Swas]

btw, finally i finished my LED Tail lamp project..posting some photos...

[Swas]

me and threat2myself went for a short ride. Edapally-Perumbavoor-Kalady-Airport-Edapally.

[kochumvk]

btw, finally i finished my LED Tail lamp project..posting some photos...

neat job. will check out it directly.
I think the pattern could have been better.

[aarunn]

Good Job Swas

[Nio]

Nice work swaroop .. You did this yourself?

[neil.jericho]

Nice job there Swas. Could you post details on how you did it for the more technically challenged souls here ( me included )

[RanjithMN]

ah..sweet..congrats Swaroop
for the brake lights did you retain the stock bulb?or are those LEDs too?
and like Vivek said you could improved the pattern!

anyway maybe you can post the details in the DIY thread!

[SilentKnight]

hey guys was on my way back to coimbatore when i saw a group of bikers on route near thrisur .... maharashtra registrations , 3 r1's one ninja..... you guys know anythin about them .... saw them early in the mornin ... assuming they halted in cochin ..... headed for banglore i guess ....

@swaroop .... lights rock

[threat2myself1]

hey guys was on my way back to coimbatore when i saw a group of bikers on route near thrisur .... maharashtra registrations , 3 r1's one ninja..... you guys know anythin about them .... saw them early in the mornin ... assuming they halted in cochin ..... headed for banglore i guess ....

@swaroop .... lights rock

those r1's and ninja are from cochin.

[RanjithMN]

yeah couple of them are xbhpians too

btw guys the 2-3 days ride you ppl are planning...can you pls keep updating me?so tht i can apply for a permission frm my dad before i come

thank you

[Swas]

neat job. will check out it directly.
I think the pattern could have been better.

Good Job Swas

Nice work swaroop .. You did this yourself?

Nice job there Swas. Could you post details on how you did it for the more technically challenged souls here ( me included )

ah..sweet..congrats Swaroop
for the brake lights did you retain the stock bulb?or are those LEDs too?
and like Vivek said you could improved the pattern!

anyway maybe you can post the details in the DIY thread!

Thanks guys...total leds used is 20. In that 12 is for standby mode and 8 for braking. Not used any resistors, diodes or capacitors. Its a 4 series LED circuit. +ve wire need to connect to 1st LED +ve terminal, then from the -ve terminal connect to 2nd led +ve terminal. At last -ve wire connect to 4th led -ve terminal. Taken a old fused bulb, connect the led wires to that bulb copper wires. like the attached pic. Simple circuit. Thanks for Kochu and threat2myself.

Ya will change the pattern. Not getting time. Did the job by half of a day.

yeah couple of them are xbhpians too

btw guys the 2-3 days ride you ppl are planning...can you pls keep updating me?so tht i can apply for a permission frm my dad before i come

thank you

2 R1's is Brijesh (Dreamchaser) and mithun's. Ninja is Riji's.

@ Ranjith, planning a ride by 27th-30th of May. Route- from Cochin-Wayanad-Ooty-Kodai-Munnar-Cochin. Around 2000kms both side.