Announcement

**abhijeet080808** · 08-24-2011, 10:50 AM

Originally posted by Parth View Post

Checked the bike's battery's voltage with a multimeter. Showed 14.5v. Added more resistors to the mix and mounted the LED tail light on the bike.

I still don't get how to check the voltage rating of the LEDs. Can you tell me what to do with the multimeter so that I can check that. Also Need to know about the current.

I'm not using the red shield. The board shows from outside but I plan to smoke the tail in a couple of days anyways so it won't be a problem.

Just connect the 2 wires from the multimeter to the 2 legs of any LED while the ckt is powered ON. Measure the voltage. It should be in 2-3V range. Repeat this for different LEDs and check.

Smoking is a alternative. Let us know how it goes.

**rajaselvam_1987** · 11-12-2011, 12:35 AM

Help on Rewinding

Bro i want a help from you.
I've installed HID on my Twister before one month but now the battery is getting down.So i want to rewind the coil, in chennai who ll do the job could you please help me

**Abhijeet Bhattacharjee** · 11-13-2011, 03:26 PM

Originally posted by abhijeet080808 View Post

Maybe its possible to do so with proper use of resistors. But, its easier to use two separate rows of LEDs.

Same LED's used as both parking & brake lamps is easier to fabricate. I have done that... Its damn easy.

**abhijeet080808** · 11-14-2011, 03:01 AM

^^ What resistance values did you use, and most importantly did you get uniform lighting from all the LEDs?

**Abhijeet Bhattacharjee** · 11-14-2011, 11:50 PM

Originally posted by abhijeet080808 View Post

^^ What resistance values did you use, and most importantly did you get uniform lighting from all the LEDs?

yeah, I do get uniform brightness from all LED's & resistor values are provided in the diagram

ckt diagram of my LED clusterhttps://www.facebook.com/photo.php?f...type=3&theater

brake lamp only
https://www.facebook.com/photo.php?f...type=3&theater

tail+brake lamp (brightly illuminated)
https://www.facebook.com/photo.php?f...type=3&theater

**rajaselvam_1987** · 11-16-2011, 12:50 PM

Bro i want a help from you.
I've installed HID on my Twister before one month but now the battery is getting down.So i want to rewind the coil, in chennai who ll do the job could you please help me

**soumya_digi** · 08-09-2012, 12:22 AM

Thanks to this old thread, I made my own LED backlight!

Announcement

Retrofitted LEDs on tailight of my P150 Classic

Comment

Comment

Comment

Comment

Comment

Comment

Comment