Re: World of Sprockets!

Friends, which front sprocket can i use to over gear karizmas chain sprocket set?.. Tried using pulsar and unicorn front sprocket, but, they are not suiting with karizmas big chain. Help please...

Re: World of Sprockets!

Not a problem. Please post the pics of the new set, so that others will get some help if the need be, just in case.

Cheers!
VJ

Re: World of Sprockets!

Thanks alot :-) will get it replaced soon..

Re: World of Sprockets!

Sprocket usage is always a game of hide and seek, for some it lasts real long, but for most it hardly reaches 20k and for some it goes with 15k itself. The chain slack adjuster to the end means it can't be adjusted anymore, which means either your sprocket or your chain is worn. But when replacing, it's a good idea to replace them both as a set. If you replace either of the one, the one you've replaced will wear faster than usual.

Replace the chain sprocket set, get it adjusted properly right in front of them. Just lubing won't do, chains need periodic adjustment. A loose chain if lubed or not lubed will wear pretty fast irrespective of periodic lubrication.

Cheers!
VJ

Re: World of Sprockets!

IDK if its right thread to ask my question but being releted to chain and sprocket, i would go with this.

I am using Yamaha Fazer for almost 2 years now and ODO reads hardly 11k!
But this time when I went to service center(after almost 5 months after last servicing) they asked me to replace chain sprocket as it cant be adjusted further. I didnt changed it yet and wanted to do some research before fitting new set which costs 1500 INR.

I used Motul chain cleaner and Chain lube for almost every 500 to 700 kms after 7 8k on ODO... before that it was free servicing where my chain was getting lubed as my running between two services was hardly 800 to 1000 kms.

Now the bolt which holds rear wheel has reached to rear end of adjustment area and cannot be tightened any further. So the SVC person asked me to replace it. My question is why the chain loosened so early? and is there any other option or to just replace chain sprocket?

PS. the svc person was like.. "aap ghar pe lubricate karte ho isliye itna toh chala.." seriously? i spent 900 bucks for that cleaner and lube! :O nd now replace the chain for 1.5k!

Re: World of Sprockets!

Of course it would, with the setup it's a little confusing for the bike. I'd suggest, keep the front sprocket as the stock or get a smaller front sprocket with a maximum change of one teeth front and three to two teeth in the rear.

You can use the P220 DTSI 36 sprocket and see how it fares.

Cheers!
VJ

Re: World of Sprockets!

Hai... Friends..recently changed my pulsar 180 ug4s chain sprocket sets to karizmas chain sprocket set as stock chain was giving problems for me. Now bike is running fine. But, it became tooo much short geared. Top end and mileage considerably dropped. Pulsar 180 ug4s stock set up is 14/39.karizmas set up is 13/40. Thinking to over gear it by changing front sprocket to 14 teath. Which front sprocket is suitable for this? Already tried using pulsars 14t front sprocket. But, it wasnt suiting with karizmas chain. What other front sprocket can i use?


Sent from my iPhone using xBhp Connect

Re: World of Sprockets!

Go for a bigger front sprocket or a smaller rear sprocket. Generally in the range of two tooth max.

Cheers!
VJ

Re: World of Sprockets!

Hi !

Want a little information on how sprocket ratios work?
I have a RX100, stock bore and stock chain sprocket set. But this setup is good for mad acceleration but doesn't give a smooth top end. When above 90 and closing on 100kmph it feels like the bike desperately needs a 5th gear.

I am looking for a sprocket setup which can give me a decent top end. Not looking for achieving any top-speed record, but the bike does 100kmph with ease but you cannot hold that speed for long because the bike feels more stressed, I am looking for more relaxed top-end...

Re: World of Sprockets!

Nah! They do sell spares if you know what you want. I tried it twice, I bought me the accelerator cable and clutch cable from ASS.

Cheers!
VJ

Re: World of Sprockets!

Its not available at Ass of bajaj or at local shops.
Even the 15t sprocket was not available to purchase individually.Had to search a lot and found one rusty piece with manufacturing year 2009!
The ct 100 holder plate also sourced from thrown away parts in a local workshop.
OT:Now Bajaj ass won't even sell dtsi10000 oil,they will change it and give if we take the bike to them and charge for oil change!
Whats up with not selling spares?Is it only in kerela?

Re: World of Sprockets!

Yeah you're right, the CT 100 does need some tampering to affix the plate. But why didn't you use the Pulsar's plate, just curious.

Cheers!
VJ

Re: World of Sprockets!

Ct 100(not a direct fit)..had to tamper with it to use!

Re: World of Sprockets!

It's obvious that the bike lacks punch in low end to the performance, but once you're in the rev sweet spot you'll definitely get the punch. Since it's overgeared, the bliss of that is different, than the menacing low end power these Apache's used to have. BTW, which plate did you use, the CT 100 or the Pulsar's?

Cheers!
VJ

Re: World of Sprockets!

Bike now ran >1.5k.
Happy to say that this set up works flawless.
Also other points noted-
The perfect region where you leave clutch and accelerate is reduced.Stalled bike a few times in traffic during the first rides but now fine .
The engine at top gear seems to be relaxed and calmer.
For normal commuting earlier I could easily putter in 5th gear for a speed of 45kmph.Now at such low speeds the 5th gear lacks punch.
But it makes up in top end performance.I did not measure the top speed in both cases but at speeds like closer to 100kmph bike feels like it wont die like felt with earlier set up.
Also engine breaking reduced.More gear shifts required too.
Mileage-slightly better.