Spare parts thread 2 strokes Yamaha RX family

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

@sriram, allright man, actually i was looking for original mikuni vm20 carb for my Rx-100, as currently my bike is on indian make mikcarb,what is the condition of the carb from inside and how much it has been used, secondly i am also looking for OE speedometer which came with either Rajdoot or Escorts embossed on them, can you search this speedometer for me.

[SriramEfunds]

Re: Spare parts thread 2 strokes Yamaha RX family

Kusmaker , someone has already contacted me on the carb. Which carb you looking at? FYI...In my advertisement had clearly mentioned that RX100/RX135 4 speed carb available and please inform Balgi that RX135 4 speed never ever came with VM26.

[Balgi]

Re: Spare parts thread 2 strokes Yamaha RX family

What's the price you are looking for this carb.

It says Rx135 as well. do ask him if it is a VM20 or VM26 type as these differ and can cause rich mixture if wrong type is fitted. BTW VM20 fits RX100

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

Anybody wants used RX100/135 4 speed carburetor, let me know.

What's the price you are looking for this carb.

[SriramEfunds]

Re: Spare parts thread 2 strokes Yamaha RX family

Anybody wants used RX100/135 4 speed carburetor, let me know.

[avhad sitaram]

Re: Spare parts thread 2 strokes Yamaha RX family

As the procedure of embossing the existing no. on to the new chassis is described by [MENTION=6069]sriram[/MENTION], i would advice you to destroy the older chassis, two chassis with same no. is illegal, and procuring new chassis is time consuming but atleast now you can be trouble free for rest of the life.

[MENTION=49419]kusmaker[/MENTION] very well said buddy
i will be in maharashtra after 10 or 15 days and update you about chasis and restoration status.

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

Nice to read i have ordered chasis in yash auto ahmednagar they quoted me 3600 inr and waiting period of one.and half month.

existing chasis is well aligned but got heavily rusted at the bottom of seat and some small holes are created due to rust , i had welded it but not look at that like a permanent solution hence wanna change it to play safe and longer.

i hope your shared experience sure fuel my slow moving restoration.

regards

As the procedure of embossing the existing no. on to the new chassis is described by [MENTION=6069]sriram[/MENTION], i would advice you to destroy the older chassis, two chassis with same no. is illegal, and procuring new chassis is time consuming but atleast now you can be trouble free for rest of the life.

[avhad sitaram]

Re: Spare parts thread 2 strokes Yamaha RX family

Usually chasis changing would involve RTO inspection and given approval only if the existing is withered and unfit due to rust beyond repair or due to damage. You will need to obtain the frame from the authorized showroom with invoice so that RTO gives the approval before the numbers are punched. Long story short, I have gone ahead and bought the frame in 2010 and changed not because of above reasons but just that I want to have a new chasis to extend the RX135 life. But I went to shed where they do these jobs however, I had to produce the vehicle papers so they would do the job. I admit that what I did was out of mere enthusiasm and old frame is still there in my house as is. Down the lane I would even give it off to some deserving restoration project.


FYI.. I even got the FC done with the same chasis and luckily no questions were asked as there was slight misalignment on the way it was punched. :P

Nice to read i have ordered chasis in yash auto ahmednagar they quoted me 3600 inr and waiting period of one.and half month.

existing chasis is well aligned but got heavily rusted at the bottom of seat and some small holes are created due to rust , i had welded it but not look at that like a permanent solution hence wanna change it to play safe and longer.

i hope your shared experience sure fuel my slow moving restoration.

regards

[SriramEfunds]

Re: Spare parts thread 2 strokes Yamaha RX family

Usually chasis changing would involve RTO inspection and given approval only if the existing is withered and unfit due to rust beyond repair or due to damage. You will need to obtain the frame from the authorized showroom with invoice so that RTO gives the approval before the numbers are punched. Long story short, I have gone ahead and bought the frame in 2010 and changed not because of above reasons but just that I want to have a new chasis to extend the RX135 life. But I went to shed where they do these jobs however, I had to produce the vehicle papers so they would do the job. I admit that what I did was out of mere enthusiasm and old frame is still there in my house as is. Down the lane I would even give it off to some deserving restoration project.


FYI.. I even got the FC done with the same chasis and luckily no questions were asked as there was slight misalignment on the way it was punched. :P

[avhad sitaram]

Re: Spare parts thread 2 strokes Yamaha RX family

Ask him for the pictures and post here for further discussion.

Surely i will tell him the same ,


btw documentation and chasis replacement are the major part of my restoration once it complete i will restore my bike with WOT
here i need to bug you friends hope you guide me in right direction , i will only ask the qns to you when i am completely stuck.
regards

[avhad sitaram]

Re: Spare parts thread 2 strokes Yamaha RX family

New chassis comes plain blank you have to punch the older chassis no on to the newer chassis.

what is the legal procedure and illegal as well to puch the no on chasis

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

one of my friend told me today that brand new clutch case of rxz is available along with worm kit and cable assembly and he quote me 850 + 850 + 200 inr for that. I m little bit confused about the genuineness of it as i never saw that item in person .
i wanna know that how to check originality and actual cost of the items.

secondly i wanna change the chasis and what is the procedure for legalise it.

new chasis has serial no punched on it or we have to punch that no??

Regards

New chassis comes plain blank you have to punch the older chassis no on to the newer chassis.

[SriramEfunds]

Re: Spare parts thread 2 strokes Yamaha RX family

Ask him for the pictures and post here for further discussion.

[avhad sitaram]

Re: Spare parts thread 2 strokes Yamaha RX family

Its has almost become extinct, those who got extra keep for future as Yamaha stopped supplying. One chance is to try with old dealers to see your luck.

one of my friend told me today that brand new clutch case of rxz is available along with worm kit and cable assembly and he quote me 850 + 850 + 200 inr for that. I m little bit confused about the genuineness of it as i never saw that item in person .
i wanna know that how to check originality and actual cost of the items.

secondly i wanna change the chasis and what is the procedure for legalise it.

new chasis has serial no punched on it or we have to punch that no??

Regards

[SriramEfunds]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello everyone
i wanna fit tachometer on my rx 100 anyone plz suggest where to source rpm cable, worm kit and tacho and there genuine prices too .
i am waiting for your valuable replies plz

Its has almost become extinct, those who got extra keep for future as Yamaha stopped supplying. One chance is to try with old dealers to see your luck.