Spare parts thread 2 strokes Yamaha RX family

[cmdazeem]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello Friends..

I am looking for a 135 4s or 5s standard bore at reasonable price... If anyone willing to sell.. please let me know.. can watsapp @ 7358056551

[percyrulz]

Re: Yamaha 2-Stroke Spares

Following items for Yamaha RX Series are for sale & is classifed based on New or Used for ready reference,


NEW Items RX SERIES (Indian):

1. Ignition kit [90/100 Kit] (Includes the Magnet, CDI, RR Unit & Base) - RX100/RX135/RXG/RX-Z (4 & 5-Speed versions)
2. Carburettor Assembly (4TL 01 - MIKUNI VM22) - RX135/RXG/RX-Z
3. Head Assembly (4TL5 / 4TL00) - RX135/RXG/RX-Z 4-Speed
4. Body parts (Viz., front mask, engine cowl, side panels, tail piece, brake light assembly, indicator Assembly) - RX-Z (4 & 5 Speed)
5. "ART" ('4Y2') piston kit (Sizes: STD, 0.25mm & 0.50mm) - RX135 (4 & 5-Speed), RXG, RX-Z (4 & 5-Speed)
6. Crank shaft assembly (with '2YA' connecting rod) - RX135 (4 & 5 Speed)/RXG/RX-Z (4 & 5 Speed)
7. Speedometer - RX100/RX135/RXG/RX-Z
8. Side Panels (LH & RH) - RX135/RXG/RX100
9. Center Panel - RX-Z (4 & 5 Speed)
10. Tachometer - RX-Z (4 & 5 Speed)
11. NGK Iridium Spark Plug - RX100/RX135/RXG/RX-Z
12. 2-T Oil tank - RX135/RXG
13. Bore & Head Rubber bush set - RX100/RX135/RXG/RX-Z
14. Petrol Tank - RX135 4-speed
15. Clutch bell assembly with matching Primary drive - RX100/RX135/RX-Z
16. Air Filter (Multi-Colour Foam) - RX100/RX135/RXG/RX-Z
17. Manifold Unit (Carburettor Joint) - RX100/RX135/RXG/RX-Z
18. RPM Worm Set & Cable - RX-Z (4-speed & 5-speed).
19. 2-T Oil Pump assembly (Big & Small) - RX100/RX135/RXG/RX-Z
20. Mirror Assembly - RX100/RX135/RXG
21. Reed Valve Assembly - RX100/RX135/RXG/RX-Z
22. Front Fender (Black & Blue Colour) - RXZ
23. Exhaust Assembly with Bend Pipe & Nut (Silencer: Chrome Type) - RX135/RXG
24. Front Foot-Rest Rubber – RXZ
25. Clutch & Magnet Covers (4 Pieces) - RX100/RX135/RXG/RX-Z (4 & 5-Speed)
26. Protector guard for Big Catalytic Exhaust - RX135
27. Chasis - RX-Z
28. Petrol Tank (Wine Red & Creamy White) - RX-Z 4-Speed
29. Seat Assembly - RX-Z
30. Piston Cylinder Kit (4TL00) - RX135/RXG/RX-Z (4-Speed Only)
31. Piston Cylinder Kit (98cc, G Series) - RX100
32. Exhaust Assembly with Bend Pipe & Nut (Silencer: Catalytic Small Type) - RX135/RXG
33. Crank Case - RX100/RXG/RX135/RX-Z
34. Chasis - RX135 (4-Speed & 5-Speed)
35. Chasis - RX-Z
36. Indicator Assembly - RX100/RXG/RX135
37. Front & Rear Hub Assembly - RX135
38. Gladiator Disc Setup suitable for RX135/RX100/RXG/RX-Z
39. Headlight Assembly - RX100/RX135/RXG
40. Engine Bearing Set - RX135/RXG/RX-Z
41. RX-Z Disc Items (Front Fork, Hub, Caliper Assembly, Lever, Master-Cylinder, Hose, Speedo worm kit) - RX-Z
42. Choke Cable - RX135/RXG/RX-Z
43. Speedometer Cable - RX135/RXG/RX100
44. Silencer (Muffler Assembly) - RX135/RX100
45. Brake Light Assembly - RX135/RXG/RX100

NEW ITEMS RX SERIES (Imported):

1. Over-Size Piston Kit (1.25mm, 1.5mm & 2.00mm) - RX135/RXG/RX-Z
2. Clutch Plates (RX-King) - RX135/RXG/RX-Z
3. IRC (Union Cycle) 18" Rims - RX100/RX135/RXG/RX-Z/RD350
4. Mikuni TM34 Carburettor (Racing Purpose Only)
5. Dunlop TT900 80/80-18 & 70/80-18 Tyres (Racing Purpose Only)
6. AGIP Fully synthetic 2-T oil
7. '4Y2' ART Piston Kit (0.75mm & 1.00mm) [On special request only]
8. Mikuni VM26SS Carburettor (RX-King, 55k series) [On special request only]

USED Items RX SERIES (Indian):

1. STD size '4TL10' RX135 5-Speed Bore kit (E2 series) with original '4Y201' ART piston.
2. Head Assembly (09L) - RX135 5-Speed
3. Sparingly used RX135 4-Speed Gear Box Assembly.
4. 16" wheel assembly (Hub + Rim + Spokes + Tyre) with 3.25 x 16 CEAT Tyre (Excellent Condition)
5. Mikuni VM24 (2YA 00) suitable for RX135 / RXG / RX-Z.
6. K&N RC1060 Performance filter & Pipercross (UK) make Performance filter suitable for RX series.
7. Expansion Chamber for RX135 (Best suited for 5-speed & 4-speed bore kit in stock condition).
8. RX135 5-Speed complete Gear Box Assembly.
9. Pulsar Disc Brake Assembly (Master cylinder + Disc Caliper assembly, Outer - Inner fork tube (Legs), Disc Plate, Front wheel + Hub, Headlight stay assembly)
10. Top plate with New Central lock assembly (2 Keys) for RX135
11. Left panel + Speedo Meter assembly + Right panel + Bracket for RX135
12. OE RX135 Front Mudguard assembly with Flap
13. Clutch Cover & Magnet Covers - RX135 4-Speed/RX100

RD350 ITEMS:

1. Wiseco Piston Kit (64.5mm)
2. Clutch Plates - Normal & Race Use (EBC)
3. Connecting Rod Kit - Long Rod & 34X OE
4. 6-Speed GearBox Assembly
5. OE Piston Rings (STD & 1.00mm sizes)
6. Reed Valve Assemby - OE & V-Force
7. Ignition System - Normal & Race Use (without lighting coil)
8. Indicator Assembly

More items will be put for sale later. Interseted may send a PM / Email for prices. Window shoppers please excuse.

Email ID: [email protected]


Kindly go through the disclaimer below very carefully before placing an order. If you can't find any item in the list above, please feel free to contact me & i will do my best to source it for you.

- Karthik..





Disclaimer:

1. Prices revealed after receipt of PM/Email are fixed & not negotiable.
2. I will not entertain any Buy-Back policy or Exchange Facility.
3. Courier + packing + Labour charges will be fixed depending on the destination distance from Bangalore. (Applicable for guys residing outside Bangalore)
4. After receipt of payment, the delivery time will be a minimum of 8-10 working days & maybe extended due to some unavoidable circumstances.
5. Full advance payment applicable for out-station guys & for local guys minimum half-advance payment applicable.
6. For outstation i will use DTDC courier.

Hey i jus saww the post.... Need block and piston for my rx 100.. could u plz connect with me to proceed further??

[percyrulz]

Re: Spare parts thread 2 strokes Yamaha RX family

Looking out for a used last oversize 4 speed bore, its ok even if its ported anyone parting with there old bores let me know.

My bore is currently on .75 if u want u can take it and bore it to .100 if possible

[percyrulz]

Re: Spare parts thread 2 strokes Yamaha RX family

there one RX100 block & One RX135 block with my friend ..both factory boxed with piston & rings. let me know if somebody needs them

Heyy i need a block and piston for my rx 100... Is it still available???

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

I see, what would be the issue with safexbikes? overpriced and crappy products? problem is, the bike is in Assam presently, so finding parts is next to impossible.

in all probability your carb might have a leaky float bowl packing or a worn out float valve , get these replaced, and you should be good to go , also there is quite a few horror stories floating in this forum itslf, safex is good only for fiber parts ,for drive train components stay away

[percyrulz]

Re: Spare parts thread 2 strokes Yamaha RX family

Guys i need a block and piston set for my rx 100... Any idea from where i could get it?? Im from Mumbai

[Manan]

Re: Spare parts thread 2 strokes Yamaha RX family

stay away from safexbikes.com, ask around local spares shops for micarb carbs , or try your luck wit various facebook sellers

I see, what would be the issue with safexbikes? overpriced and crappy products? problem is, the bike is in Assam presently, so finding parts is next to impossible.

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello, I just got a rx 135 4 speed, 1998 built with the mikuni carb, the problem is that the rubber/plastic elements inside the carb is worn out and I am not sure of the tolerance levels of the metalic parts. Now I wanted to understand if the zadon carb is good as an alternative or would it be better to salvage what ever parts is available and remake the old mikuni carb.

stay away from safexbikes.com, ask around local spares shops for micarb carbs , or try your luck wit various facebook sellers

[Manan]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello, I just got a rx 135 4 speed, 1998 built with the mikuni carb, the problem is that the rubber/plastic elements inside the carb is worn out and I am not sure of the tolerance levels of the metalic parts. Now I wanted to understand if the zadon carb is good as an alternative or would it be better to salvage what ever parts is available and remake the old mikuni carb.

[scudmissile007]

Re: Spare parts thread 2 strokes Yamaha RX family

Guys..

I'm very new to this forum. Can someone please help me locate a rx 135 4s OEM standard bore and piston kits in Chennai. I'm not interested in the Goetze kit however happy for .5mm bore that can be rebored if available for sale. Thanks for your help.

Regards

You got PM

[2strokerush]

Re: Spare parts thread 2 strokes Yamaha RX family

Guys..

I'm very new to this forum. Can someone please help me locate a rx 135 4s OEM standard bore and piston kits in Chennai. I'm not interested in the Goetze kit however happy for .5mm bore that can be rebored if available for sale. Thanks for your help.

Regards

[Anand Deepak]

Re: Spare parts thread 2 strokes Yamaha RX family

I'm interested in the bore,
Pls

----consecutive posts auto-merged-----

Hi Atul,

I'm interested in the bore, head, tail light & carb. Please share your contact details. And I can be reached @ 09867456688.


Happy & Safe Riding

Sent from my iPhone using Tapatalk

[QUOTE=Anand Deepak;1353693]I'm interested in the bore, pls contact 8089291114

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

replaced with new carb, have not changed the jets yet. this motorcycle in discussion was parked for 8 straight years.
as of now she is running like a charm with the new carb. shall i still change the jets from old carb or let it run ? or upjet to match up with the increased bore size ?

if you are happy with current setup thendont bother elsemake the switch , no need to upjet

[theironhorse99]

Re: Spare parts thread 2 strokes Yamaha RX family

replace the jets in the new carb with the jets in the old carb

replaced with new carb, have not changed the jets yet. this motorcycle in discussion was parked for 8 straight years.
as of now she is running like a charm with the new carb. shall i still change the jets from old carb or let it run ? or upjet to match up with the increased bore size ?

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

am running a G2 bore with 3rd oversize 1mm. shall i be looking at bigger jets ? or replace the stock jets of the old one on new one ?
in 4th gear at around 45 kmph i feel flat power curve and it picks up again at 60 kmph and goes well..

replace the jets in the new carb with the jets in the old carb