KTM RC 200 Owners Experience Thread

[BiKeLovER]

re: KTM RC 200 Owners Experience Thread

Guys! Which chain-cleaner and spray do you suggest? Need to buy one in a day or two!

Onwer Manual Says Motul

I need more details

1. When i took bike the RPM 1 was 7.5K not sure what RPM2 is !!
2. I did set the RPM1 to 5K but unable to do it for RPM2.
3. The owner manual says to Set RPM1 press mode till you get ODO2 and then press hold SET for 10-15 seconds and RPM1 comes up.
4. They say the same thing for RPM2 but it never comes up.

Can anybody help me setting up RPM2 please ?

[hackernewbie]

re: KTM RC 200 Owners Experience Thread

Onwer Manual Says Motul

I need more details

1. When i took bike the RPM 1 was 7.5K not sure what RPM2 is !!
2. I did set the RPM1 to 5K but unable to do it for RPM2.
3. The owner manual says to Set RPM1 press mode till you get ODO2 and then press hold SET for 10-15 seconds and RPM1 comes up.
4. They say the same thing for RPM2 but it never comes up.

Can anybody help me setting up RPM2 please ?

Either you are confused here or I am. See if the following makes any sense:

RMP1 is set to 5.5k & 7.5k till the 1st service. When you cross RMP 1, the red light starts blinking. When you cross/touch RPM 2, the warning light becomes constant.
You SHOULD NOT try to set the RPMs on your own for now.

Pressing Mode brings up ODO1 and ODO2. While on ODO 1, pressing SET for 10-15 secs clear the ODO 1 reading. Doing the same while on ODO 2 clears ODO 2.

[BiKeLovER]

re: KTM RC 200 Owners Experience Thread

Either you are confused here or I am. See if the following makes any sense:

RMP1 is set to 5.5k & 7.5k till the 1st service. When you cross RMP 1, the red light starts blinking. When you cross/touch RPM 2, the warning light becomes constant.
You SHOULD NOT try to set the RPMs on your own for now.

Pressing Mode brings up ODO1 and ODO2. While on ODO 1, pressing SET for 10-15 secs clear the ODO 1 reading. Doing the same while on ODO 2 clears ODO 2.

My RPM1 was set at 7.5 when i took delivery it use to blink after 7.5K RPM, I did not check RPM2 Settings that time.

1. Now i have setup RPM1 using the set button, you keep pressing mode till you get ODO2 once you hold mode(My Bad hold Mode not SET) for 10-15 seconds and it will bring up RPM1 which can be setup increased decreased

2. now they have given the same instruction to setup RPM2 in manual but it never comes up

[hackernewbie]

re: KTM RC 200 Owners Experience Thread

...
2. now they have given the same instruction to setup RPM2 in manual but it never comes up

Okay, have never tried that. You might want to check with your ASC.

[Balgi]

re: KTM RC 200 Owners Experience Thread

Onwer Manual Says Motul

I need more details

1. When i took bike the RPM 1 was 7.5K not sure what RPM2 is !!
2. I did set the RPM1 to 5K but unable to do it for RPM2.
3. The owner manual says to Set RPM1 press mode till you get ODO2 and then press hold SET for 10-15 seconds and RPM1 comes up.
4. They say the same thing for RPM2 but it never comes up.

Can anybody help me setting up RPM2 please ?

Once rpm 1 shows on your console, press and hold mode again for rpm2. Or just try pressing set after rpm1 shows.

[BiKeLovER]

re: KTM RC 200 Owners Experience Thread

I tried that but mode increase rpm one count and set decreases rpm one count will try again

[Balgi]

re: KTM RC 200 Owners Experience Thread

I tried that but mode increase rpm one count and set decreases rpm one count will try again

Then do this. Keep holding mode for a few more seconds after rpm1 shows. I did it some time back but can't seem to recall the procedure. Its easy as far as memory serves.

[BiKeLovER]

re: KTM RC 200 Owners Experience Thread

Sure thanks will try this

[s1d]

re: KTM RC 200 Owners Experience Thread

1. Now i have setup RPM1 using the set button, you keep pressing mode till you get ODO2 once you hold mode(My Bad hold Mode not SET) for 10-15 seconds and it will bring up RPM1 which can be setup increased decreased

2. now they have given the same instruction to setup RPM2 in manual but it never comes up

You SHOULD NOT try to set the RPMs on your own for now.
nothing will happen if you set the rpm.. you should only remember to not exceed 7500rpm until the first 1000km

Pressing Mode brings up ODO1 and ODO2. While on ODO 1, pressing SET for 10-15 secs clear the ODO 1 reading. Doing the same while on ODO 2 clears ODO 2.
The trip1/trip2 readings do not require a 10-15sec SET button press... it is reset to 0 in just 2-3seconds on holding the SET button down.

comments in bold

Okay, have never tried that. You might want to check with your ASC.

I tried that but mode increase rpm one count and set decreases rpm one count will try again

Stop getting confused guys .. here is how to do it. (am not sure if the indian rc manual has a typo or something, i think the d200 did have a typo at the display setting description.. i ll let you know more about that later when i have access to my manual).. but for now this pdf manual should clear you doubts:

[BiKeLovER]

re: KTM RC 200 Owners Experience Thread

comments in bold




Stop getting confused guys .. here is how to do it. (am not sure if the indian rc manual has a typo or something, i think the d200 did have a typo at the display setting description.. i ll let you know more about that later when i have access to my manual).. but for now this pdf manual should clear you doubts:

[ATTACH=CONFIG]166051[/ATTACH][ATTACH=CONFIG]166052[/ATTACH]

The Manual has Typo Because I checked thrice just to reverify and it has same instructions copied over from RPM1 to RPM2

btw where can i find the PDF Manual

THnaks for your help !!!

[s1d]

re: KTM RC 200 Owners Experience Thread

The Manual has Typo Because I checked thrice just to reverify and it has same instructions copied over from RPM1 to RPM2

btw where can i find the PDF Manual

haha.. so its a shoddy copy paste job by ktm... i was sure my d200 manual had the typo, because it confused me initially. I just wanted to double check before i posted it here. I am surprised that even after 3 years of being in the market, they still had such a typo on the d200 manual! unfortunate to see it replicated on the RC as well.
the pdf owners manual are available on the ktm website itself.. though they are for the 'EU' version... and i do not think there is any significant difference between the EU and Indian manual.. atleast the EU manual seems to not have the typos... bajaj/ktm why the step motherly treatment.. duh?!

[hackernewbie]

re: KTM RC 200 Owners Experience Thread

comments in bold




Stop getting confused guys .. here is how to do it. (am not sure if the indian rc manual has a typo or something, i think the d200 did have a typo at the display setting description.. i ll let you know more about that later when i have access to my manual).. but for now this pdf manual should clear you doubts:

[ATTACH=CONFIG]166051[/ATTACH][ATTACH=CONFIG]166052[/ATTACH]

Obviously nothing will happen, its just that if you have a warning pop-up to caution you, you will make sure you are NOT crossing it.

10-15 secs or 2-3 secs, I never counted that. I guess I was able to convey what I wanted to and that's enough from my POV.

[BiKeLovER]

re: KTM RC 200 Owners Experience Thread

haha.. so its a shoddy copy paste job by ktm... i was sure my d200 manual had the typo, because it confused me initially. I just wanted to double check before i posted it here. I am surprised that even after 3 years of being in the market, they still had such a typo on the d200 manual! unfortunate to see it replicated on the RC as well.
the pdf owners manual are available on the ktm website itself.. though they are for the 'EU' version... and i do not think there is any significant difference between the EU and Indian manual.. atleast the EU manual seems to not have the typos... bajaj/ktm why the step motherly treatment.. duh?!

I am confident about the typo because i am struggling to do it from the day of my delivery. every time i leave house i recheck the manual and i fail with pain in my fingers :P lol.

I think for RC manual they have just swapped D200 manual main page...

This is a terrible thing someone may visit the ASC for such a silly thing Dammmmmmm

cant stop laughing myself.

----consecutive posts auto-merged-----

Obviously nothing will happen, its just that if you have a warning pop-up to caution you, you will make sure you are NOT crossing it.

10-15 secs or 2-3 secs, I never counted that. I guess I was able to convey what I wanted to and that's enough from my POV.

You are right but as the RPM number are too small i struggle to keep an eye on them... and my RPM1 is set at 5000 were it starts blinking but not sure were RPM2 is set,

Setting it up to 7500K will help me understand that immediately instead of looking at those tiny numbers !!!!

[hackernewbie]

re: KTM RC 200 Owners Experience Thread

I am confident about the typo because i am struggling to do it from the day of my delivery. every time i leave house i recheck the manual and i fail with pain in my fingers :P lol.

I think for RC manual they have just swapped D200 manual main page...

This is a terrible thing someone may visit the ASC for such a silly thing Dammmmmmm

cant stop laughing myself.

----consecutive posts auto-merged-----



You are right but as the RPM number are too small i struggle to keep an eye on them... and my RPM1 is set at 5000 were it starts blinking but not sure were RPM2 is set,

Setting it up to 7500K will help me understand that immediately instead of looking at those tiny numbers !!!!

When does your blinking red warning light come - up? Should be around 5.5k.

[BiKeLovER]

re: KTM RC 200 Owners Experience Thread

When does your blinking red warning light come - up? Should be around 5.5k.

It was setup at 7.5K when i took delivery later i changed it to 5K as mentioned in the manual !!!!