Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Accelerate quick but brake easy.

Our Partner

Announcement

Collapse
No announcement yet.

Pulsar AS 200 Owners Review and Experiences

Collapse
X
Collapse
 
  • Page of 34
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 4 9 10 11 12 13 14 15 16 17 18 19 24 34 template Next
  • narora9999
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Hunterkol View Post
    Let's look into logic here.
    When we start the motorcycle, the movement of piston and valves gives us a feedback which may also be termed as controlled vibrations.
    Then when we want to move the motorcycle, we engage the clutch which, in some cases changes the engine sound but will not contribute towards creating vibrations.
    Engine oil on the other hand will contribute towards vibrations because it is suppose to lubricate the moving parts inside the engine block and a low viscosity engine oil will greatly affect the movement of such parts hence increasing friction which will further create vibrations beyond the controlled level.
    I personally feel you can change the engine oil to 20w50 or 15w50 like Motul5100 or 7100 and see the difference. I am pretty sure thats the problem.
    And please tell me if changing the rocker arms will require opening the engine or not as I'm considering that too.

    Leave a comment:

  • narora9999
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Hunterkol View Post
    Let's look into logic here.
    When we start the motorcycle, the movement of piston and valves gives us a feedback which may also be termed as controlled vibrations.
    Then when we want to move the motorcycle, we engage the clutch which, in some cases changes the engine sound but will not contribute towards creating vibrations.
    Engine oil on the other hand will contribute towards vibrations because it is suppose to lubricate the moving parts inside the engine block and a low viscosity engine oil will greatly affect the movement of such parts hence increasing friction which will further create vibrations beyond the controlled level.
    I personally feel you can change the engine oil to 20w50 or 15w50 like Motul5100 or 7100 and see the difference. I am pretty sure thats the problem.
    I agree, I've ordered 7100 20w50 on amazon as its not available here. Will change it asap.

    Leave a comment:

  • Hunterkol
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by narora9999 View Post
    but there were no vibes before the clutch and engine oil got changed. no i haven't changed the filter.
    Let's look into logic here.
    When we start the motorcycle, the movement of piston and valves gives us a feedback which may also be termed as controlled vibrations.
    Then when we want to move the motorcycle, we engage the clutch which, in some cases changes the engine sound but will not contribute towards creating vibrations.
    Engine oil on the other hand will contribute towards vibrations because it is suppose to lubricate the moving parts inside the engine block and a low viscosity engine oil will greatly affect the movement of such parts hence increasing friction which will further create vibrations beyond the controlled level.
    I personally feel you can change the engine oil to 20w50 or 15w50 like Motul5100 or 7100 and see the difference. I am pretty sure thats the problem.

    Leave a comment:

  • narora9999
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Hunterkol View Post
    Rockers hardly cost 150 to 170 a set and helps to reduce vibes.
    Do share if you have changed the Air Filter or not. You can also have the jet of the Carb thoroughly cleaned.
    Believe me or not but clutch has nothing to do with vibes. Clutch would be responsible if there is knocking but, there is no knocking on your ride.
    but there were no vibes before the clutch and engine oil got changed. no i haven't changed the filter.

    Leave a comment:

  • Hunterkol
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by narora9999 View Post
    They did something for the first gear and its solved but for vibes they asked me to come on Monday.
    The mechanic said its better for your engine blah blah blah and he didn't shut up until I agreed.

    How much do rocker arms cost?
    Rockers hardly cost 150 to 170 a set and helps to reduce vibes.
    Do share if you have changed the Air Filter or not. You can also have the jet of the Carb thoroughly cleaned.
    Believe me or not but clutch has nothing to do with vibes. Clutch would be responsible if there is knocking but, there is no knocking on your ride.

    Leave a comment:

  • narora9999
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Hunterkol View Post
    I doubt too AS200 having scissor gear.
    I don't know this is what I've been told, and on Monday the guy will open the clutch assembly and fit it correctly so most probably the vibes will go, right? because there were no vibes before the clutch plates changed.

    Leave a comment:

  • narora9999
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Hunterkol View Post
    Tik Tik sound is not just because of Tappet but, the rocker arms are also responsible. Have them changed and the problem will be solved.
    SVCs have an itch of using sand paper on the clutch plates which causes gears to stick or not slipping into position. I would strongly suggest to look for a good mechanic locally.
    They have not set the Clutch hub properly which may also be the reason for the First Gear.
    If I were you, I would have given SVC hell for using a lower grade engine oil. Why would they do something as stupid as pouring in a lower grade oil with new set of clutch assembly?
    Also have the Hub springs on the clutch assembly checked for tension. Make sure all the 4 springs are hard to equal level.
    They did something for the first gear and its solved but for vibes they asked me to come on Monday.
    The mechanic said its better for your engine blah blah blah and he didn't shut up until I agreed.

    How much do rocker arms cost?

    Leave a comment:

  • Hunterkol
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Om1234 View Post
    1.Get waxpol lubricating spray
    spray it all over ,the cabels chain
    friction parts
    2.Change engine oil
    3.Drain all the petrol
    petrol gets damaged after 50 days of no use
    4.Petrol can be used as an alternate to lubricate
    5.Check air filter for any blockage
    6.Start the bike and leave it idle for least
    10-15 minutes
    I am missing crucial tools to open the seat. The carb is blocked and I need to remove the tank to get that leftover fuel out. The CON nut set is history so I will have to take her to my mechanic. But I am thankful to you for responding.

    Leave a comment:

  • Hunterkol
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by narora9999 View Post
    I just took it to a mechanic he said something about scissor gear not being in correct position and he will fix it on Monday as their mechanic who is good with NS is on leave.
    Tik Tik sound is not just because of Tappet but, the rocker arms are also responsible. Have them changed and the problem will be solved.
    SVCs have an itch of using sand paper on the clutch plates which causes gears to stick or not slipping into position. I would strongly suggest to look for a good mechanic locally.
    They have not set the Clutch hub properly which may also be the reason for the First Gear.
    If I were you, I would have given SVC hell for using a lower grade engine oil. Why would they do something as stupid as pouring in a lower grade oil with new set of clutch assembly?
    Also have the Hub springs on the clutch assembly checked for tension. Make sure all the 4 springs are hard to equal level.

    Leave a comment:

  • Hunterkol
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Bibhu View Post
    Not sure as has sicssor gear.
    I doubt too AS200 having scissor gear.

    Leave a comment:

  • Bibhu
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by narora9999 View Post
    I just took it to a mechanic he said something about scissor gear not being in correct position and he will fix it on Monday as their mechanic who is good with NS is on leave.
    Not sure as has sicssor gear.

    Leave a comment:

  • narora9999
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Bibhu View Post
    Then the clutch bell may be loose.
    I just took it to a mechanic he said something about scissor gear not being in correct position and he will fix it on Monday as their mechanic who is good with NS is on leave.

    Leave a comment:

  • Bibhu
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by narora9999 View Post
    yes both are changed
    Then the clutch bell may be loose.

    Leave a comment:

  • narora9999
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by Bibhu View Post
    Just the clutch plates or both clutch and pressure plates?
    yes both are changed

    Leave a comment:

  • Bibhu
    replied
    Re: Pulsar AS 200 Owners Review and Experiences

    Originally posted by narora9999 View Post
    but I just told I got them replaced a day ago
    Just the clutch plates or both clutch and pressure plates?

    Leave a comment:

Previous 1 4 9 10 11 12 13 14 15 16 17 18 19 24 34 template Next
Working...
X
© xBhp.com 2026. All rights reserved.
Designed by xBhp