Tweet
Got a fine scratch line on the LCD panel while cleaning it today, the cloth had a mcroscopic sorta stone which resulted in that shit.
Any ideas how to remove it?
Any ideas how to remove it?
-
The Magician"
-
That sux man, even i noticed a scratch, not very fine, on my lcd today. I didnt notice it all this while because of the dust, theres a lot of construction around my building, the rain washed it clean!Comment
-
The main wire from the battery that goes to the self, gets surrounded by the blakish thing,that affects the flow of the current...
even after cleaning the mess by sandpaper and applying vaseline it comes back, what is the cause of it??The Magician"
Comment
-
Whitish or bluish substance, usually on the negative side is oxidation. Dunno what the black stuff is, never seen it.Comment
-
Originally posted by julianpaul View Post
Last i cleaned it was 1 week back, till now it's clean.The Magician"
Comment
-
There's one more problem im facing with my rtr...
Whenevr I apply my bike's rear brakes, it seems like im slipping, i mean it feels dat d rear is goin in sum diffrnt direction
..vich often scares me coz I feel dat m about 2 fall..
..ive ridden oder bikes like a r15, unicorn etc, bt I nevr felt dat prob in those...wht could b d prob guys..?
Comment
-
Hehe, in case you missed the 180 thread lately, THE TYRES!Originally posted by TusharMoily View PostThere's one more problem im facing with my rtr...
Whenevr I apply my bike's rear brakes, it seems like im slipping, i mean it feels dat d rear is goin in sum diffrnt direction..vich often scares me coz I feel dat m about 2 fall....ive ridden oder bikes like a r15, unicorn etc, bt I nevr felt dat prob in those...wht could b d prob guys..?
Last edited by julianpaul; 06-09-2010, 09:48 AM.Comment
-
Originally posted by julianpaul View PostHehe, in case you missed the 180 thread lately, THE TYRES!
Plus the badly alighned wheel which the SC guys do while setting the chain (not matching the measure lines at both the ends).The Magician"
Comment
-
Here are the snaps of canOriginally posted by julianpaul View PostThere's lot to it other than saddle....
sigpicComment
-
You won't believe this. While speaking to the western region service head about my excessive rear disc wear issue, I mentioned the mechs never kept both adjusters at the same mark. He said 1 or 2 lines difference doesn't matter! I guess then they can skip the marks and use the ungli method only!Originally posted by rennycornelius View Post
Plus the badly alighned wheel which the SC guys do while setting the chain (not matching the measure lines at both the ends).
Cheers mate! It says acrylic laquer. You say the finish is just like on our silencer etc?Originally posted by nox2505 View PostComment
-
I love TVS SC guys for their attention to detail work and immense knowledge.....Originally posted by julianpaul View PostYou won't believe this. While speaking to the western region service head about my excessive rear disc wear issue, I mentioned the mechs never kept both adjusters at the same mark. He said 1 or 2 lines difference doesn't matter! I guess then they can skip the marks and use the ungli method only!
Even half of the 1 line matters in the chain case....!!!!!!!!!!!!!!!!!!!The Magician"
Comment
-
But this is the western region service head we're talking about! so imagine the state of the actual mechs thenOriginally posted by rennycornelius View PostI love TVS SC guys for their attention to detail work and immense knowledge.....
Even half of the 1 line matters in the chain case....!!!!!!!!!!!!!!!!!!!
Comment
-
I dont know what they really do to the bike when being told to clean the carb, adjust the clutch play, clean the airfilter, adjust the tappets and all.Originally posted by julianpaul View PostBut this is the western region service head we're talking about! so imagine the state of the actual mechs then
BTW i went to the SC to get the sets of plugs and the guy told me that the TVS TRU chain spray is coming in 100ML pack too but he wasn't having it in stock.
Will get it for rains as it'll save the chain from turning "orange".Last edited by rennycornelius; 06-09-2010, 01:06 PM.The Magician"
Comment
-
Originally posted by julianpaul View PostYou won't believe this. While speaking to the western region service head about my excessive rear disc wear issue, I mentioned the mechs never kept both adjusters at the same mark. He said 1 or 2 lines difference doesn't matter! I guess then they can skip the marks and use the ungli method only!
Cheers mate! It says acrylic laquer. You say the finish is just like on our silencer etc?
Yessssss near to ditto. I have painted heat shield and fuel tank cap with the same. You can try my can if you want. I will be going to neral today or tomorrow.Last edited by nox2505; 06-09-2010, 01:44 PM.There's lot to it other than saddle....
sigpicComment
-
Any idea of the cost? It's a 100ml spray or some regular bottle or something?Originally posted by rennycornelius View Post
Hmm, i think i'll wait till after the rains now. Actually i need to paint my silencer bend-pipes, the paint is gone in patches and rusted. Thing is if i paint over the rust it'll corrode under it. After the rains i'll sand it, apply primer and then paint. But i also think spray paint won't hold due to the heat. The original didn't. I also have some nicks and scratches on the silencer body. Can we use this paint to touch up, or does the whole thing have to be painted to get a uniform look?Originally posted by nox2505 View PostComment
Comment