Announcement

**Shogunsamurai** · 12-06-2018, 08:26 PM

Re: Random Questions regarding the RX series

^ I think stanleys parts are way too expensive and they are very hard to find also. Once someone had told me that the RD350's Stanleys Blinker unit costs 5000 a pair. Dont know wheather it is right or wrong.

----consecutive posts auto-merged-----

Originally posted by Manan View Post

^got it now I have another question apart for indonesia and india was the rx 135 sold globally? I wanted to change my CDI to racing one or some sort, I have changed stock carb to the VM 26 and I was looking for an appropiate CDI. I am not sure the stock CDI would handle the larger jets/carb. I had found this in Amazon, but considering india, this seems to be a chinese/filipino import which is super inflated. https://www.amazon.in/s/ref=nb_sb_no...rds=rx+135+cdi

NMW works fine i think. Once my friend had installed an NMW coil and a RX King Carb (VM26) on a shogun. The perfomance was on an another level. Dont know about the stock ones.

**Manan** · 12-07-2018, 10:12 PM

Re: Random Questions regarding the RX series

[QUOTE=Shogunsamurai;1361196]^ I think stanleys parts are way too expensive and they are very hard to find also. Once someone had told me that the RD350's Stanleys Blinker unit costs 5000 a pair. Dont know wheather it is right or wrong.

----consecutive posts auto-merged-----

NMW works fine i think. Once my friend had installed an NMW coil and a RX King Carb (VM26) on a shogun. The perfomance was on an another level. Dont know about the stock ones.[/QUOTE

Got it, will go for it.

**Throttlefreak** · 12-16-2018, 10:48 AM

Re: Random Questions regarding the RX series

My RX 100 has been suffering from misfires mostly in the mid rpms after which there is a strong surge in torque. I have checked the sparkplug for the AFR setting and it is perfect. Could it be a problem of the ignition coil?

**acs1207** · 03-16-2019, 12:55 PM

Re: Random Questions regarding the RX series

Is there any way we can fit a lock/ key set instead of the nuts for the release of the seat ?

**Om1234** · 03-16-2019, 01:04 PM

Re: Random Questions regarding the RX series

Originally posted by acs1207 View Post

Is there any way we can fit a lock/ key set instead of the nuts for the release of the seat ?

one friend of mine used the seat lock of the karizma,and fitted it in his rx135.

**acs1207** · 03-16-2019, 10:58 PM

Re: Random Questions regarding the RX series

Originally posted by Om1234 View Post

one friend of mine used the seat lock of the karizma,and fitted it in his rx135.

Any pics or details?

**Om1234** · 03-16-2019, 11:53 PM

Re: Random Questions regarding the RX series

Originally posted by acs1207 View Post

Any pics or details?

the lock that opens when we insert the key and rotate it,a little bit of space is opened.(Consider it part A)
he took that out and welded it upside down and removed the part that we push down to remove the seat in karizma.

1.took a fat metal piece and dig a rectangular hole in it ,according to the size of the part A's metal stripe which moves up and down while rotating the key.
So that it fits in the metal piece properly and goes halfway through the metal piece.
As the part which moves up and down is U shaped.

2. Welded the metal piece on the corner of the seat according to the position of part A.

I hope i explained it properly,if no then let me know.

**Manan** · 04-15-2019, 07:50 PM

Re: Random Questions regarding the RX series

What was the original pattern/ brand of tyres that the rx 135 came with? rib at the front knobbies at the rear?

**acs1207** · 04-30-2019, 10:52 AM

Re: Random Questions regarding the RX series

How good is this? Not planning on one but would still like to know about it.

**kb100** · 05-01-2019, 02:31 PM

Re: Random Questions regarding the RX series

Originally posted by acs1207 View Post

How good is this? Not planning on one but would still like to know about it.

hydraulic conversion of clutch actuation

**Manan** · 05-04-2019, 12:31 AM

Re: Random Questions regarding the RX series

Originally posted by acs1207 View Post

How good is this? Not planning on one but would still like to know about it.

Mentioned by kb above, a hydraulic clutch is self adjusting to a point, only requires a fluid top up instead of a full cable replacement repair.

Disadvantages are it adds weight, complication[ more seals, rubber parts etc]

The closest analogy for 'feel' I can come up with is the difference between cable drum brake and a hydraulic disc brake.

----consecutive posts auto-merged-----

Originally posted by Manan View Post

What was the original pattern/ brand of tyres that the rx 135 came with? rib at the front knobbies at the rear?

bump bump bump bump bump bump bump bump

**kb100** · 05-04-2019, 01:33 AM

Re: Random Questions regarding the RX series

Originally posted by Manan View Post

What was the original pattern/ brand of tyres that the rx 135 came with? rib at the front knobbies at the rear?

Everything at that came at that time had ribbed front tyres, the rear ones were not knobbies but the pattern was pretty flat in the middle like the ceat m86

**Arun V Dev** · 05-15-2019, 02:10 PM

Re: Random Questions regarding the RX series

Hey anyone knows about the different disc brakes that can be used in Yamaha Rx ??? Most common are old pulsar , Apache , gladiator , cbz etc. But I have seen much bigger and better looking disc brakes on certain Rx and RD . So can you guys suggest me some of them . I actually have pulsar disc and is not at all satisfied with the stopping power .

**Arun V Dev** · 05-15-2019, 03:43 PM

Re: Random Questions regarding the RX series

Originally posted by Shogunsamurai View Post

^ I think stanleys parts are way too expensive and they are very hard to find also. Once someone had told me that the RD350's Stanleys Blinker unit costs 5000 a pair. Dont know wheather it is right or wrong.

----consecutive posts auto-merged-----

NMW works fine i think. Once my friend had installed an NMW coil and a RX King Carb (VM26) on a shogun. The perfomance was on an another level. Dont know about the stock ones.

Okay , so any ways to source such items ? Espry Stanley parts. And I also got hold of an RD rear fender which is not painted. So I was hoping to fix it on my Rx . The fender is too wide to slide inside the chassis to bolt. So any idea on what to do. I want it to look good.

**Shogunsamurai** · 05-15-2019, 07:24 PM

Re: Random Questions regarding the RX series

Originally posted by Arun V Dev View Post

Okay , so any ways to source such items ? Espry Stanley parts. And I also got hold of an RD rear fender which is not painted. So I was hoping to fix it on my Rx . The fender is too wide to slide inside the chassis to bolt. So any idea on what to do. I want it to look good.

I dont know exactly where to hunt for stanley parts. I think there are some people selling stanley products at higher prices on facebook groups etc.

Announcement

Random Questions regarding the RX series

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment