Spare parts thread 2 strokes Yamaha RX family

[djvenom9111]

Attached are the pics of Imitation models of OEM Bore kit. This one is a fake.

Well this is not the black colour one.

Enjoy.

Cast quality looks good

[aargee]

Ok friend i know few reasons like wrong carbu setting,filter problem,wrong spark plug, am a novice in biking world.

Right; but just check how everything started off. Also check your engine oil if you've changed it recently or not changed for long time? Also check if you're running low on 2T oil or changed the brand.

btw aargee is BPR7HS a correct one? my bike is with the mech have to service everything and repaint.

I assume its NGK; I don't have much idea; I use Mico Bosch & keep changing for every 10K kms, just 60 bucks.

Good luck on your repaint job; as a matter of fact, don't trust any mechs, just keep an eye on the job they're carrying out. Would love to see a thread on your job.

[roshiba777]

How to know the 2Tsupply to the engine is ok with the autolube any idea on the position of the 2T oil pump wire nut...

[spm_clt]

Right; but just check how everything started off. Also check your engine oil if you've changed it recently or not changed for long time? Also check if you're running low on 2T oil or changed the brand.


I assume its NGK; I don't have much idea; I use Mico Bosch & keep changing for every 10K kms, just 60 bucks.

Good luck on your repaint job; as a matter of fact, don't trust any mechs, just keep an eye on the job they're carrying out. Would love to see a thread on your job.

Thanks for your tips. i use yamalube 2T oil in the 2t tank itself. I noticed a small leak in the 2t pump, as i can see little oil spreed on the ground i told the mech about it and he said it is bush the culprit anyhow i decide to change all the hoses and cables
yes its NGK BPR7HS imported by yamaha.

[rio008]

hey guys, is it possible to change my stock 2000 yamaha rx135's speedo meter and whole set with rxg's speedo/tacho type?

Anyone tried that before ? i saw one video in youtube, that guys chaiming that he changed it with his rx-100 and his tacho was working properly while accelerating

[spm_clt]

2t oil pump

How to know the 2Tsupply to the engine is ok with the autolube any idea on the position of the 2T oil pump wire nut...

follow the link there you can find how to adjust 2t pump in the manual.

http://www.xbhp.com/talkies/help-me/11407-rx-135-workshp-manual-owners-manual-wanted.html

[aargee]

i use yamalube 2T oil in the 2t tank itself. I noticed a small leak in the 2t pump, as i can see little oil spreed on the ground i told the mech about it and he said it is bush the culprit anyhow i decide to change all the hoses and cables

If possible open up the right side first outer cover & you can find this oil pump & check from where the oil is leaking. If it is at the hose, then the issue is simple, you can replace it. If you remove the oil pump, there's a gasket between the right outer cover & the oil pump, its a small one & most probably that must be the culprit. There're different sizes of gasket, so check out the size that you'll need & get it from the spare parts shop or Y.A.S.S. Let me know what you find.

[Bluesmoke]

Ive tried doing that. Getting the pilot lamp will be a bit hard. But the whole set up looks very cool!!!!! Had it for awhile but my tacho got stolen.

[spm_clt]

spares

got few more items

REED VALVE ASSSEMBLY 575.47
LOCK SET 550
HEAD LIGHT STAY R&L 101*2
SIDE COVER ASSY 333
SPEEDO METER CABLE 54.97
PILOT LAMP HOUSING R&L 101*2
SCREW 9.01
FUEL TANK CAP ASSMBLY 250
ACCELERATOR CABLE 167
SILENCER TUBE 184.01

[aargee]

got few more items

REED VALVE ASSSEMBLY 575.47
LOCK SET 550
HEAD LIGHT STAY R&L 101*2
SIDE COVER ASSY 333
SPEEDO METER CABLE 54.97
PILOT LAMP HOUSING R&L 101*2
SCREW 9.01
FUEL TANK CAP ASSMBLY 250
ACCELERATOR CABLE 167
SILENCER TUBE 184.01

@SPM - All of them are good prices & I hope they're the MRP; BTW, the pricing is different for L&R side panels I guess.

And what's silencer tube, you mean the core? (flute in local terms)? Is that for RX100 or RX135? And what about the muffler assy?

One small suggestion, if you're buying these for your rebuild/restoration project, pls start a new thread & you can have all the suggestions & advices collected at one place.

[djvenom9111]

I bought this last year from the showroom itself. Can anyone tell me if its ART made or some else


By djvenom9111 at 2010-07-16

By djvenom9111 at 2010-07-16

By djvenom9111 at 2010-07-16

By djvenom9111 at 2010-07-16


Uploaded with ImageShack.us

[jd666]

update for RX100 people -

Silencers are available from the Company, OEM, mrp is around 1570/-!

@bluesmoke - im getting a number of pilot lamps for the RXZ by monday, depending on the quality, ill post pics here.

[aargee]

@JD - Does the OE muffler assy have RX/RXG (on the carton box) or anything other than that?

[jd666]

^^ i think it has RX/RXG on it, but not sure of whats on this. What i got confirmed was that the part number is the same as for the RX100 silencer ( though the actual part number is still to be confirmed by me )

Checked availability for a RX100 bore kit and crankshaft assy for a member on xbhp.

Bore kit OEM mrp - 6000/-
Crankshaft assy mrp - 3500/-

Delivery after order, 7-10 days.

[aargee]

^^ i think it has RX/RXG on it, but not sure of whats on this. What i got confirmed was that the part number is the same as for the RX100 silencer ( though the actual part number is still to be confirmed by me )

Wanna hear some surprises? The RX/RXG is the recent model, say during mid 90's that started floating around. YMIS released this pipe in the name of emission control that you can commonly see with any RXG. The difference between the original Rx100 & RX/RXG is the mufflers inside. As you would've guessed by now, RX/RXG has more number of mufflers to spoil the OE Rx100 rhythm. Its true that too much of mufflers spoil the beat

Still don't believe? Come hear my rantings on RX/RXG on my Sumaha err...Yazuki; the beat sucks

Crankshaft assy mrp - 3500/-

Its lesser here