Bike Mechanics

[Ishq]

Re: Bike Mechanics

hey guys,

Please suggest me a good mechanic for rx135 in chennai........

thanks in advance.....

[RonnieB]

Re: Bike Mechanics

any good RX specialists in pune who know inside out of RX if yes put down some info guys would be really helpful

Mobike in Girija Shankar Vihar in Karvenagar with the added benefit of sharda niketan girls hostel right beside it
Amjad in Mayur Colony Kothrud and his cousin Badshah on MIT road.
All really knowledgable and dedicated cannot go wrong with these guys.

----consecutive posts auto-merged-----

Mohsin - 9823839085 (shivajinagar) and Fareez seem to good mechanics according to some of you guys. Any bullet specailists in Pune? I gave my 2011 classic chrome 500 to him only to learn later he was a thief later on. Did not confirm it but was sweating until i got my bike back. Any trustworthy guys out there I can learn from as well as get my bike serviced. Please post.

----consecutive posts auto-merged-----

The guy I gave my bike to has his garage near paud phata specializes in bullets only

[VinayakVerma]

Re: Bike Mechanics

Hi shannbirdman. Can you Pls tell me any good mechanics for four strokes in chandigarh area specially for TVS APACHE 150 . Pls help

[virajbhoir]

Re: Bike Mechanics


any problem with your sportsbike or vintage contact me
7875441120 viraj bhoir
email id: [email protected]
my workshop is in mumbai vasai

[xpranav]

Re: Bike Mechanics

any problem with your sportsbike or vintage contact me
7875441120 viraj bhoir
email id: [email protected]
my workshop is in mumbai vasai

Hey Viraj, you may post your details here as well http://www.xbhp.com/talkies/universa...uthorized.html

[praveen jones]

Re: Bike Mechanics

I heard cbx racing near satyam next to new college is rxpert in rx and rd's
And also u can check with kumar mechanic shop at egmore

Sent from my GT-i9100 using xBhp Connect mobile app

[hellmet]

Re: Bike Mechanics

Any good mechanic in Hyderabad for my CB Trigger?

[Prabhjot]

Re: Bike Mechanics

you can get it done by any local mechanic, but trusted one.
tell the mechanic to show you all the parts in original sealed packing before installing. that should solve your problem that instead of new block piston he will use old block with reboring.

otherwise also a new block is easy to identify from outside, by its fresh looks and color, an old one even if washed n number of time with petrol or whatever can not look similar

my personal experience, a rebored block is sometimes as good as new block piston, sometimes even better. it all depends on the guy doing reboring-how good he is. i have done engine overhaul 2 times -- once with new block piston and next with an oversize one and the kind of seal i got with rebored block ---i tell you man, new block piston set was nowhere near to that. but before doing that, i was also not sure how good the reboring job will be--but i trusted my mechanic fully and he sure did not disappoint me. so it all depends on mechanic.

one very impostant thing, its better to get the block piston assembled in front of your eyes. and tell the mechanic to use some oil before inserting piston into block. many times mechanic neglect this part or forget due to time, but it may ruin your engine. also sometimes mechanic use -old used engine oil--do not let him do that as old engine oil always has metal particles that damage block rather than provide lubrication. even if you have to purchase and give him oil (although only few drops are required)--do it, but never let him slip piston into dry bore or with used engine oil.

purchase and keep a piece of soft cloth with you, in case either block or piston gets even little bit dirty (either by keeping it on floor or anything), clean it with a new piece of cloth and not with a dirty cloth that mechanics use. cleaning it with dirty cloths will only ruin it further. i was rather surprised when my mechanic asked me to purchase a cloth of Rs.20/= to clean the piston, but he insisted, and believe me its better to spend on cloth than being unsatisfied with rebuild.

believe me, i have seen people getting new block piston ruined in no time or not getting desired results because of above two reasons...

[MENTION=15693]princesirohi[/MENTION] Can you please tell me the mechanic from whom you got your engine overhauling done.
I'm planning to revive my Pulsar 150 2006 model. Planning to change the piston. I was planning to it done from the same mechanic from whom I get my bike serviced. Though he is pretty good at his work but i'm not sure how well he will be able to do the job.

[princesirohi]

Re: Bike Mechanics

^^ Mohsin - 9823839085

[RTR996]

Re: Bike Mechanics

Cochin-Kerala- Sivan Tharayil-Indian Auto Works,Choondi,Aluva,Ernakulam District. He is an expert for 2T restoration works. Stopped working on bullets recently though : . 4T Repairs only.. Does not like to do any kind of modification works..!! He has deep knowledge of bikes of yesteryears ..has worked on AJS,Triumph,RD's.!!

[kuttu]

Re: Bike Mechanics

[TheArcher84]

Re: Bike Mechanics

Hey,

I am looking for a good mechanic for RE Classic 500 in Chennai. The service centres aint upto the mark what we expect. Please suggest.

[Shon]

Re: Pune

BEST PULSAR MECHANIC IN PUNE

Name: Mohsin
Mobile: 9823839085

He is THE BEST MECHNIC i have seen. excellent knowledge, dedication to work, smart, quick learner. simple the best.

Does he look at RX100 too? I am looking for someone to completely restore my RX100. OR could anyone suggest a good mechanic for RX100


SHON.

[princesirohi]

Re: Pune

Does he look at RX100 too? I am looking for someone to completely restore my RX100. OR could anyone suggest a good mechanic for RX100


SHON.

Yes, he works on all the bikes manufactured in India and also on restoration of RX100.

Sent from my A210 using Tapatalk 2

[vaseey]

Re: Bike Mechanics

Aweas Syed, Chennai, Royapet (9841074529). This guy is awesome, superbikes come in to his garage for fixes. He also does a phenomenal job for the normal bikes. I would recommend him!