Let there be Light : Bike Lighting, HID etc

[hypheni]

Re: Want to modify my RX135

I am having a Yamaha RX135 in which I want to install nighteye led 36watt h4 bulb and novatronix universal led hazard installation and later on am thinking to install led fog light. But my battery power is 2.5ah. Do I need to install more power battery and do I need to change the magnet also and the wiring ??
If yes, then which ah battery will be suitable for my RX135 according to my above given modification and which wiring should I buy ??

If you want to DIY then search a bit more on web or let some experts comments, but if you would like to do it from some mechanic I would suggest you to go to Wellington and ask for Sallu. He will probably do it for you. PM me for his phone number.

[rookster]

Re: Let there be Light : Bike Lighting, HID etc

Can an LED headlight bulb be fitted in Avenger 220 street ?

[Siddhartha.S]

Re: Let there be Light : Bike Lighting, HID etc

Guys, what are the options for auxiliary lights under 3000 rupees for the set of 2? It can be flood lights or projector kinda lights. Nice and reliable brands preferred. On Amazon i could find only knock-offs. So please suggest a good brand.
Thanks in advance.

[Astrix]

Re: Let there be Light : Bike Lighting, HID etc

Guys, what are the options for auxiliary lights under 3000 rupees for the set of 2? It can be flood lights or projector kinda lights. Nice and reliable brands preferred. On Amazon i could find only knock-offs. So please suggest a good brand.
Thanks in advance.

Check out a2z motorcycle superstore. The owner there Rajiv is really helpful and also has his own brand for LEDs. I am not sure if he distributes the same in Bangalore. But you can alway check with him. My elder brother had gotten it fixed from him before we rode for IBW some 3 years back I guess and they still going strong.

[Siddhartha.S]

Re: Let there be Light : Bike Lighting, HID etc

Check out a2z motorcycle superstore. The owner there Rajiv is really helpful and also has his own brand for LEDs. I am not sure if he distributes the same in Bangalore. But you can alway check with him. My elder brother had gotten it fixed from him before we rode for IBW some 3 years back I guess and they still going strong.

Ok, thanks! Will check it out.

[rohingaba]

Installing bixenon projector to my cb trigger

Hi I have Honda CB trigger 150cc Bike, I have installed Bixenon projector to it with 35W 5000K HID. connection has been taken from battery through a relay. when I switch on the headlight Battery discharges very fast with discharging current of 4.6 Amp..I have checked the RR UNIT, it has 2 wire input as AC from stator, one wire red for Battery charging and other wire yellow for headlight which is having -6v output..checked the output of stator also its is 67 v at 3k rpm...please tell me what should I do, shoud I install a new RR unit if so please suggest me a good one..and where I can buy it...please help me as I am in mid of nowhere..I use to drive at nights..

[ishan994]

Re: Let there be Light : Bike Lighting, HID etc

I have 2017 TVS VICTOR 110 DRL . As it's come with 55W headlight bulb but lightning only good after 4000 RPM. IT'S have AC headlight .. even pass light on AC . It's have 7 amp battery. Its okay to connect ignition wire with yellow wire of headlight to make it DC. Will battery charging Mechanism able to charge it.

[rathores]

summary post

I am looking for good light setup for highway rides.
I am a complete noob.
I am sure someone might have summarised different type of lights that can be used in different setup.
If someone can find such post please share it.

[arnuld]

Re: Let there be Light : Bike Lighting, HID etc

I got CT100B. I changed my headlight bulb from stock to Bosh and using it from last 9 months but I am still not satisfied. How about OSRAM HS1 Silver Star from amazaon ?

[dantisjoeshaji]

Re: Let there be Light : Bike Lighting, HID etc

Is there a way to wire an accessory in such a way that it turns ON when ignition is ON and turns OFF when Engine ON, (with a switch to turn on during Engine ON)

[jaikishanwadhawa]

H7 led for Pulsar 220

Hello everyone,
6 months back my low beam bulb stopped working. It served me well for 6 years as it was never replaced since i bought my bike. During periodic service i got it replaced but new bulb had low illumination compared to one i had before.
I inspected and found that low beam bulb that was replaced was of daichi brand and original bulb was of halonix, so if any one thinking of replacing bulbs buy halonix because they are better compared to daichi.

Recently i bought new 35w h7 pair of led bulbs from aliexpress of OSLAMP brand. I replaced them myself and results are good.
They provide good illumination compared to stock bulbs. No mods were needed to be done to headlamp assembly to accommodate new bulbs.
Only thing is that whole fairing needs to be loose to get access to high beam bulb. Low beam bulb can be accessed by removing black cover above number plate.

I also bought t10 1w led bulbs for parking lights and rear number plate light from aliexpress.

I plan to do a twin beam mod that i had read on xBhp forum posted by rahul devnath.

cost of led bulbs pair INR 1000
cost of 6 t10 1w led bulbs INR 200

[Abhi303]

Re: Let there be Light : Bike Lighting, HID etc

hey I got an old skoda's projector for 700Rs and hundai sonata's projector for 600Rs from used market here in chennai. I am planning to fit a Hid into any one of these. the problem is I got a H4 hid and both the projectors are H2 and HB4.
Any suggestions how to jimmy the bulb in, or should i just buy the right bulb.

Did you managed to install skoda projector on your bike?

[Midhun.akd]

Re: Let there be Light : Bike Lighting, HID etc

Did some testing on various headlight H4 bulbs and thought I should share the results here:







2) CN360 N1 H4 LED (Some say that Phillips Ultinon LED are the same as these)
Link: https://www.aliexpress.com/item/OGA-...698413406.html
(You can contact the seller and ask him to send you just one piece in case you don’t need 2)

.

Hello Bro, I think CN360 N1 model is a fanless LED , Any Heat problem u faced ? iam going to order LED headlights for my R15..It is same H4 socket and 35 watts.. Any other suggestion for r15 ?

[maahinberi]

Re: Let there be Light : Bike Lighting, HID etc

Hello Bro, I think CN360 N1 model is a fanless LED , Any Heat problem u faced ? iam going to order LED headlights for my R15..It is same H4 socket and 35 watts.. Any other suggestion for r15 ?

Hey, I've not faced any issues with the cn360. It should be great on your r15

[king001001]

Re: Let there be Light : Bike Lighting, HID etc

Guys, what are the options for auxiliary lights under 3000 rupees for the set of 2? It can be flood lights or projector kinda lights. Nice and reliable brands preferred. On Amazon i could find only knock-offs. So please suggest a good brand.
Thanks in advance.

i fitted my pulsur ug2 with a pair of 15w led lamps,which i bought online(https://goo.gl/pcRi2j)








----consecutive posts auto-merged-----

Is there a way to wire an accessory in such a way that it turns ON when ignition is ON and turns OFF when Engine ON, (with a switch to turn on during Engine ON)

add an extra switch which will be avilable in local spare market(40-80 INR)