KTM RC 200 Owners Experience Thread

[s1d]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

So I finally got the service done in ECity SVC. Fuel setup came under warranty adding a happy ending to my troubles.

did they change the entire fuel pump ? Or just the float (adjust/replace??)?

[thatguy]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

did they change the entire fuel pump ? Or just the float (adjust/replace??)?

Hey s1d, yeah they changed the pump itself rather than doing the adjustment.

[thatguy]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

did they change the entire fuel pump ? Or just the float (adjust/replace??)?

s1d, Ajay, Srvn

I want to change the decals of my RC. I've searched in the forum but not much info was available. Do u guys know of any decent shop or place in bangalore where i can get it done?
This questions goes to all other community members as well. If u guys happen to know any such place please let me know.

Thanks

[Wilson4willy]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

s1d, Ajay, Srvn

I want to change the decals of my RC. I've searched in the forum but not much info was available. Do u guys know of any decent shop or place in bangalore where i can get it done?
This questions goes to all other community members as well. If u guys happen to know any such place please let me know.

Thanks

wrapandride.com
Visit it

[Ajay Vishwanath]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

s1d, Ajay, Srvn

I want to change the decals of my RC. I've searched in the forum but not much info was available. Do u guys know of any decent shop or place in bangalore where i can get it done?
This questions goes to all other community members as well. If u guys happen to know any such place please let me know.

Thanks

you got wrap and ride... they will send you the decals.. OR if you're like me, design one, go to any sticker shop, get it cut out, stick it.. simple.. they all do the same job...

----consecutive posts auto-merged-----

s1d, Ajay, Srvn

I want to change the decals of my RC. I've searched in the forum but not much info was available. Do u guys know of any decent shop or place in bangalore where i can get it done?
This questions goes to all other community members as well. If u guys happen to know any such place please let me know.

Thanks

you got wrap and ride... they will send you the decals.. OR if you're like me, design one, go to any sticker shop, get it cut out, stick it.. simple.. they all do the same job...

[thatguy]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

you got wrap and ride... they will send you the decals.. OR if you're like me, design one, go to any sticker shop, get it cut out, stick it.. simple.. they all do the same job...

----consecutive posts auto-merged-----



you got wrap and ride... they will send you the decals.. OR if you're like me, design one, go to any sticker shop, get it cut out, stick it.. simple.. they all do the same job...

Yeah of course I am the latter type. Have some designs of mine. But not sure about the quality we get in sticker shops. Is it pretty much same with wrap and ride?

[Ajay Vishwanath]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

Yeah of course I am the latter type. Have some designs of mine. But not sure about the quality we get in sticker shops. Is it pretty much same with wrap and ride?

Probably the wrapnride might be of better quality than the ones you get locally coz it's mass manufactured, so lower costs & more opportunity for better quality products, but I may be wrong also, however, for wrapnride, you got online reviews to check on.. I've seen local works also not bad, mine is a local work, there are pics, but they are towards the starting of this thread..

http://www.xbhp.com/talkies/motorcycle-ownership-experiences/30510-ktm-rc-200-owners-experience-thread-66.html#post1149356

here....

I hope it helps you get an idea... I went to a local sticker shop, he did it on the non-radium sticker.. so it doesn't shine and I like it that way.. good quality, survived a fall and a slide on track & street, still holding good.. good quality I'll say.. or lucky me?

[Srvn]

Re: KTM RC 200- Always on Low Fuel Level Indicator problem

Probably the wrapnride might be of better quality than the ones you get locally coz it's mass manufactured, so lower costs & more opportunity for better quality products, but I may be wrong also, however, for wrapnride, you got online reviews to check on.. I've seen local works also not bad, mine is a local work, there are pics, but they are towards the starting of this thread..

http://www.xbhp.com/talkies/motorcycle-ownership-experiences/30510-ktm-rc-200-owners-experience-thread-66.html#post1149356

here....

I hope it helps you get an idea... I went to a local sticker shop, he did it on the non-radium sticker.. so it doesn't shine and I like it that way.. good quality, survived a fall and a slide on track & street, still holding good.. good quality I'll say.. or lucky me?

DIY anyday!!, Local sticker shops does really good work, thing is you need patience... Ask for their convenient time and visit them so that they are free and hence are more likely to try and bring out their best, and are more open to your choices, so on and the results would usually be amazing. They even stick it for you in a very good manner, do not risk sticking on your own.

Not to mention it works out very very cheap than wrapandride or so, and if you can speak local language trust me nothing like it here in Bangalore, else take a friend who can help with local language helps a great deal in conveying things more clearly.

Cheers

[phat_17]

Re: KTM RC 200 Owners Experience Thread



Sharing...

[Fagant]

Re: KTM RC 200 Owners Experience Thread

Got a chance to ride the 2017 iteration of the KTM RC 200, here's what I thought :

https://anant97.wordpress.com/2017/06/24/2017-ktm-rc-200-first-ride-review/

[raj.pranay]

Re: KTM RC 200 Owners Experience Thread

Hi all. I was recently on a long ride till srisailam on my RC. And while riding I tried upshifting without using the clutch. It seemed to work just fine. I maintained a steady throttle input while doing so. So the question now is, how advisable is this procedure? Is it gonna hurt the gearbox?
But I figured I shouldn't downshift this way.
So please let me know. And I did it only a couple of times. Thought its better to confirm.

[s1d]

Re: KTM RC 200 Owners Experience Thread

Hi all. I was recently on a long ride till srisailam on my RC. And while riding I tried upshifting without using the clutch. It seemed to work just fine. I maintained a steady throttle input while doing so. So the question now is, how advisable is this procedure? Is it gonna hurt the gearbox?
But I figured I shouldn't downshift this way.
So please let me know. And I did it only a couple of times. Thought its better to confirm.

if you want to play it safe, shift normally using clutch.
there is a chance you might end up damaging the gear box.. you need to blip throttle momentarily or need something like a quick shifter setup.. otherwise it is asking for trouble.

[raj.pranay]

Re: KTM RC 200 Owners Experience Thread

Thanks. Won't do it again.

[raj.pranay]

Re: KTM RC 200 Owners Experience Thread

Hi all, I've been planning to buy a paddock stand but I found the options too costly online. My budget is about 2.5k. can I get any vfm stand with this budget?

GA Engg on Amazon costs about 3.8k. I should have bought it when it was 2.8.

Are there any alternatives. Can I get them anywhere in Hyderabad? Like ramkot or some other place?

[Ajay Vishwanath]

Re: KTM RC 200 Owners Experience Thread

Hi all, I've been planning to buy a paddock stand but I found the options too costly online. My budget is about 2.5k. can I get any vfm stand with this budget?

GA Engg on Amazon costs about 3.8k. I should have bought it when it was 2.8.

Are there any alternatives. Can I get them anywhere in Hyderabad? Like ramkot or some other place?

You can try BikeOPedia, StreetFlames & other biking shops locally. They should have one at 2500.