Originally posted by phanikar
View Post
-
In this case the brake lever doesn't go back fully and hence the switch is activated. -
Thanks psr sir..i am not removing catcon plus its bs3 silencer i think ,ncr was having bs3 norms from 2004 i believe. Sir is there any way i can speak/chat with you around this like for 5-10 mins..your expert guidance will help me lot in my current project otherwise it will be a guess and see type.. thanksLast edited by rawat97; 03-23-2021, 01:31 AM.Leave a comment:
-
Owners have used Old CBZ silencers without the Catcon for improvement in acceleration . Beware it increases Exhaust emissions and with Govt making testing much more strict, passing the smog test may become a problem. For 4 wheelers the present testing is done on BS III Standards, and those failing will be de-registered .Originally posted by rawat97 View PostLeave a comment:
-
Hello psr sir..i was trying to ask this question through message but looks i am not able to reach due to message limit..anyways sir i have to use cbz classic silencer for some reason for couple of months so ot will have reduce back pressure as it have 4 holes drilled on exhaust.just wondering how will it affect engine and any tuning is required to make it work.thanksLeave a comment:
-
psr thanks sir..i remember reading it in the initial pages but after changover the pages number changed and i lost track of those pages..i spent hours to find out where that info is and later thought just drop a message to sir and i will get crisp reply..Originally posted by psr View Post
than.
i am also dropping a message to you for little modification thing irrevelent to this thread..please reply if possible.. thanksLast edited by rawat97; 03-15-2021, 05:12 PM.Leave a comment:
-
It is not preferred to go for the High Lift cam since it causes repeated problem with valve clearance ie., tappet adjustment , and also causes increased tappet noise. Some owners had complained of increased drive train wear. Regarding the Piston, it is slightly increased compression . To use or not is user's discretion.Originally posted by rawat97 View Post
Overall the smoothness of the engine is not the same as the older Karizma with Stock , Older version of Piston and Cam.
Good Luck.
Leave a comment:
-
Hello..one query please i remeber there was a discussion happen on new karizma round dome piston and highlift camshaft..can i ask if anyone have done that..and how much power gain i can expect out of that..any issues also please psr i remember you have provided some info around that..can i ask if you or anyone can provide that info again.also any need for tuning required for carburettor as well due to high lift camshaft..thanks
Also i want to upgrade tyre to 120/80 section so any advice on any..i am preferring zapperQ due to its centre grooves.. thanksLast edited by rawat97; 03-14-2021, 09:07 PM.Leave a comment:
-
Just found on youtube..karizma retrofitted with dual channel abs.. posting here for some masala to discuss..may be abs retrofitting is not that problematic as we think, although price will be 35k-40k..reliability of this abs is also not sure..i think unless we have apache ride modes defined abs it should not be any problem psr , fellow riders any advice.
Leave a comment:
-
Ji first check if the Brake lever goes back to rest position when you release it. If it does not, check for lubrication. If it still does not return fully back , then there is contamination of brake fluid making the the Master cylinder piston "O" rings to swell and become tight. Changing the master cylinder kit AFTER flushing and cleaning the old brake fluid is the only way out.Originally posted by acs1207 View Post
I am assuming the brake light switch position is not altered and is in good condition.Leave a comment:
-
What to do when the MC spring goes weak and the brake light is always on ?Leave a comment:
-
Originally posted by kiran2508 View Post
^^Thanks buddy for detailed response. Clutch seems fine, dumping the clutch locks the wheels, there is air coming out of silencer as well, when kicker used plus wheel also spins as it normally do. I checked the timing chain and it is intact. You are right, it has no compression now. Looks like there is problem with the valves or something. I took to the nearest service center but found it closed. I will take to again. I myself wont be able to solve this I guess. The surprising thing is, it has happed while it was standing, I rode it few days back and it was fine and when tried starting this happened.Leave a comment:
-
From your post, kick feeling dead, tik tik sound during self start and battery, spark plug HT coil current is fine means only one thing. Suggest you to not to try to start again and again, as it can cause more damage.Originally posted by silentmusic View Post
Did you try to start using jerk? Pushing it in a slope and try to dump the clutch in 3rd gear? What happens?
I feel your bike has no compression from the dead kicker or could be slipping dead clutch.
Better to tow or push to bike to nearest mechanic,
What is color of Spark plug tip? Is it grey and burnt, or black and oily or white and corroded?
Remove the top valve cover to start with, if you see any broken valves and cams wheels, guides and seals, also check for clearances.
Next remove the Head assembly and check for any broken/damaged rings, heavy scratch marks on cylinders piston or broken crank rod.
Karizma is one of the cheapest 200cc+ bikes to maintain right now even if its a full rebuild, should not cost more.Last edited by kiran2508; 01-24-2021, 01:49 AM.Leave a comment:
-
Hi Buddy,Originally posted by silentmusic View PostHello guys, how are you all
Need help, Karizma is not starting, It has been performing absolutely fine, now today when I went to install the battery after recharging it, I heard tik tik sound coming from the engine, It came while kicking or self starting. After few attempts it stopped and now its not willing to start. The kick is also feel lifeless. I checked the spark plug and its getting power properly. Removed the fuel cap to check if there is any air lock issue. But the problem is the kick itself not feeling life to it, its not as free as when we have faulty clutch but its not giving any feedback. I have feeling that something got broken inside, cam chain or something I dont know if it gives this sort of issue without cam chain. What could be problem? Please suggest. Thanks.
If the engine was making abnormal sounds and since the kicker is now feeling lifeless, it is better to get it inspected by a Mechanic. To reach the root cause of the problem and trying to fix yourself might be a bad idea in terms of time\money wastage. Do let us know how you proceed.
Best of luck.Leave a comment:
Leave a comment: