Announcement
Collapse
No announcement yet.
The Honda CB Twister
Collapse
X
-
Re: The Honda CB Twister
Get the SKF ones. You won't be disappointed. Also, why use 15w50? It's not like max ambient temperature anywhere in India reaches 15w50. Also, trust me Synthetic doesn't do much good in smaller capacity bikes like this. Either go for a mineral or semi synth if you want. FS is good as useless in small capacity engines.Originally posted by Saeber View Post[My Motorcycles]
2019 - Honda xBlade Non-ABS (2018)
-
Re: The Honda CB Twister
ok so i will stick to gulf pride semi synthetic 20w40..Originally posted by Bismaya View PostGet the SKF ones. You won't be disappointed. Also, why use 15w50? It's not like max ambient temperature anywhere in India reaches 15w50. Also, trust me Synthetic doesn't do much good in smaller capacity bikes like this. Either go for a mineral or semi synth if you want. FS is good as useless in small capacity engines.
and replace skf clutch plates..
will be replacing it myself.
clutch hub, clutch center also i will see and replace.
even gear holder needs replacement i think. will hav to buy 14 no. box spanner & clutch holder tools.
hav already bought 8 & 10 no. t spanners, ring spanners 12 11 10 9, allen key 6..while i was doing valve clearance.
after valve clearance the power of my bike has increases.. it has stopped stalling at low speeds in 4th & 3rd gears.
did full servicing of front disc brakes.. removed them completly.. fully opened & cleaned completly..even removed the pistons.
cleaned chain by completly removing it and washing in kerosene.removed caburretor and cleaned it via petrol. did tuning as per this thread.. 1.8 turns anticlockwise. the spark plug is now super clean.. the ceramic is white.
this will be first time i will be opening the crankcase.
have anyone of you done engine flush using diesel? i hav done it during last engine oil change.. 50% diesel 50% old oil and let the engine run for 2 mins.. hav u guys tried any other way?
Comment
-
Re: The Honda CB Twister
Default Re: The Honda CB Twister
Done.. changed the clutch hub & center.. & pressure plates.. orignal honda parts..
skf clutch plates..
& gear liver spring.
i put 950 ml oil instead of 850ml.
had to buy clutch puller & box nut of 19mm..tools worth 400rs.
skf clutch plates costed 120rs for a set of 4.
pressure plates costed 40 rs each.
hub & center about 400 rs.
gasket 100 rs approx.
bike is running smoothly till now.
i didnt change the clutch springs..old clutch plates had same amount of material as new ones.
only pressure plates had parralal lining all across.
youtube helped me a lot in the procedure.
oil stainer was blocked 75%.
centrifugal oil pump, oil stainer & bottom of crank case cover had carbon and fine metal particals. even found hairs in oil stainer.
this was the first time crank cover was opened. my bike has driven only 55k kms. bought in may 2010.
hav kept clutch freeplay of 6mm.
please enlighten if i missed something.
Comment
-
Re: The Honda CB Twister
Update: Vibrations has reduced a lot. This is a clear sign that clutch was slipping while driving. Expecting rise in milage. Gear shifts are super smooth & acceration has increased. Was driving at 40kmph..the engine rev is lower than before at same speed. Will update later.
Comment
-
Re: The Honda CB Twister
Post some Picture of your ride. Good to see you taking care of the machine. These are Machines they run, they break down and get fixed not like us humans.Originally posted by Saeber View PostUpdate: Vibrations has reduced a lot. This is a clear sign that clutch was slipping while driving. Expecting rise in milage. Gear shifts are super smooth & acceration has increased. Was driving at 40kmph..the engine rev is lower than before at same speed. Will update later.
Comment
-
Re: The Honda CB Twister
Dear Sir,Originally posted by mrbabu76 View PostAs promised pictures are below.
I am owning Honda CB Twister. I bought it preowned and initially I had some rear suspension problem, I changed new shock absorbers. Now again I getting stiff back problems and I need to reduce the height. As your advice earlier in this thread shall I change the suspensions to Bajaj Pulsar's gas suspension. Changing that will affect the bike performance and how about latest Platina Gas suspension because twister and platina has same weight. If you are from Chennai please share your contact number.
Thank you,
Siva Raman
Comment
-
Re: The Honda CB Twister
Where did you get the spares required and the tools?Originally posted by sachin1111 View Posthey joseph......seems you made lots of efforts on improving your bike. hats off to you!! would like to more from you regarding valve timing adjustment. first i want to buy one allan key,for opening that timing hole cap. which size key should i buy?
Comment
-
Re: The Honda CB Twister
Hi guys i am having issue with disc brake, i changed the oil but it lost all the pressure. I watched videos on youtube but it did not help. Brake is still loose with no pressure.
I tried pumping the brake then releasing and tightening the bleed valve.
Any suggestions !
Comment
-
Re: The Honda CB Twister
Get the caliper and MC checked as well for any air. How old is your bike? It would be a good idea to service everything if the bike is really that old.Originally posted by doubling View PostHi guys i am having issue with disc brake, i changed the oil but it lost all the pressure. I watched videos on youtube but it did not help. Brake is still loose with no pressure.
I tried pumping the brake then releasing and tightening the bleed valve.
Any suggestions ![My Motorcycles]
2019 - Honda xBlade Non-ABS (2018)
Comment
-
Re: The Honda CB Twister
Originally posted by Bismaya View PostGet the caliper and MC checked as well for any air. How old is your bike? It would be a good idea to service everything if the bike is really that old.
Bike is running good, only having brake issue.
I will check with local mechanic today and if possible also get the cost from service center.
Bike is 10 years old, twister 2010 model.
--------------------------------------------------------------------------------------------------------------
I repaired it from local mechanic today, air was stuck in the pipe and the brake pump was leaking.
Cost me Rs.470
Brake pump + brake oil + bleed valve + brake cleaningLast edited by doubling; 03-05-2020, 08:22 PM.
Comment
-
Re: The Honda CB Twister
Good to hear that it's going strong even after 10 years. Post a pic if you can.Originally posted by doubling View PostBike is running good, only having brake issue.
I will check with local mechanic today and if possible also get the cost from service center.
Bike is 10 years old, twister 2010 model.
--------------------------------------------------------------------------------------------------------------
I repaired it from local mechanic today, air was stuck in the pipe and the brake pump was leaking.
Cost me Rs.470
Brake pump + brake oil + bleed valve + brake cleaning[My Motorcycles]
2019 - Honda xBlade Non-ABS (2018)
Comment
-



Comment