The Official Pune Offline Meet(G2G) Thread

[abhishekparvate]

hello everyone.
a very good evening to all

i have some questions.. expecting inputs from your side


My bike (P220F) was idle for over a month. cranked it yesterday (came to life immediately) but found some things changed..
the bike starts vibrating after 5k.. before it used to vibrate after 8.5k.
secondly the sound of the engine has changed. sounds like a bike with K&N on it. i checked the filter but it seems to fine.
and thirdly, the poor pick-up..

what could be reason? some inputs please..

[shrinathrao]

hello everyone.
a very good evening to all

i have some questions.. expecting inputs from your side


My bike (P220F) was idle for over a month. cranked it yesterday (came to life immediately) but found some things changed..
the bike starts vibrating after 5k.. before it used to vibrate after 8.5k.
secondly the sound of the engine has changed. sounds like a bike with K&N on it. i checked the filter but it seems to fine.
and thirdly, the poor pick-up..

what could be reason? some inputs please..

For vibes did you checked the bearings or did someone dropped her in your parking?

For further help post this issue in ownership thread of pulsar 220 as i think there you will get better help.

[Eshan-P180]

hello everyone.
a very good evening to all

i have some questions.. expecting inputs from your side


My bike (P220F) was idle for over a month. cranked it yesterday (came to life immediately) but found some things changed..
the bike starts vibrating after 5k.. before it used to vibrate after 8.5k.
secondly the sound of the engine has changed. sounds like a bike with K&N on it. i checked the filter but it seems to fine.
and thirdly, the poor pick-up..

what could be reason? some inputs please..

Good to see you back...
Today G2G is schedule at Hotel Roopali, FC RD, are you coming for it today??
Time is 8pm onwards... Hope to see you there...
About the problem you mentioned above can be sorted out there too, get the bike along. Mostly it is because its not being used for a month now and as Shrinath pointed out someone might have dropped the bike or caused some damage during your absence...

[shrinathrao]

Good to see you back...
Today G2G is schedule at Hotel Roopali, FC RD, are you coming for it today??
Time is 8pm onwards... Hope to see you there...
About the problem you mentioned above can be sorted out there too, get the bike along. Mostly it is because its not being used for a month now and as Shrinath pointed out someone might have dropped the bike or caused some damage during your absence...

@eshan - you had the similar issue right ? Or was it someone else?

[Eshan-P180]

@eshan - you had the similar issue right ? Or was it someone else?

No man,
My bike couldn't go above 8,000rpm so forget rattling and vibrating panels...

I think this has been sorted out recently on the ride... Slow and steady increasing the accelerator...

[Viper1089]

Are any ninja 250 owners coming to todays g2g? And a bold question: would any owner be kind to let me test ride the ninja? I am about to book one but before going for it I think I should really experience it as against the CBR250. Sadly the PRB showroom hasnt got a N250 available to test ride it. They did promise to make one available as soon as possible though. After detailed discussion with trustvishwas and desertfox (thanks to both for their honest opinions) I am completely confused and the only thing remaining is to actually test ride both bikes. My heart wants to go for the N250 while my family says CBR250....

[niks_devil666]

try the ktm ... it is even better

[Viper1089]

KTM has a greater waiting period. arnd 3 months. Cant wait that long.. Is the KTM even better than the Ninja250?

[Professor Biker.....]

KTM has a greater waiting period. arnd 3 months. Cant wait that long.. Is the KTM even better than the Ninja250?

Yup, I'll be there at right, do you could rode my bike..... ;-)

[Viper1089]

Yup, I'll be there at right, do you could rode my bike..... ;-)

Thank you! Will be great. See you at G2G tonight.

[satyenpoojary]

hello everyone.
a very good evening to all

i have some questions.. expecting inputs from your side


My bike (P220F) was idle for over a month. cranked it yesterday (came to life immediately) but found some things changed..
the bike starts vibrating after 5k.. before it used to vibrate after 8.5k.
secondly the sound of the engine has changed. sounds like a bike with K&N on it. i checked the filter but it seems to fine.
and thirdly, the poor pick-up..

what could be reason? some inputs please..

1. Check the Oil levels in your bike
2. Check if all nuts and bolts are tightened enough (especially the engine manifolds)
3. Check for play in the fairing and panels...


'(is yours the FI bike?)

[abhishekparvate]

Good to see you back...
Today G2G is schedule at Hotel Roopali, FC RD, are you coming for it today??
Time is 8pm onwards... Hope to see you there...
About the problem you mentioned above can be sorted out there too, get the bike along. Mostly it is because its not being used for a month now and as Shrinath pointed out someone might have dropped the bike or caused some damage during your absence...

hey bro..
good to see you too.
feels good to be back.
i have some imp work here in Chinchwad, i will try my best to finish it and be there at 8pm.

about the bike, no one dropped it.. it was everyone's out of reach..as you said it could be because of the long gap.. yes i will bring the bike..
see you then.. take care

[abhishekparvate]

For vibes did you checked the bearings or did someone dropped her in your parking?

For further help post this issue in ownership thread of pulsar 220 as i think there you will get better help.

no i did not check anything. i was too tired to do that.
plus i dont have enough know-how..
no one dropped it.. the bike was out of everyone's reach.. no one could even see her actually..!!

good idea, i should post it there too..
thanks man..!!
see you soon..!!

[abhishekparvate]

1. Check the Oil levels in your bike
2. Check if all nuts and bolts are tightened enough (especially the engine manifolds)
3. Check for play in the fairing and panels...


'(is yours the FI bike?)

thanks man. i will try it and let you know.
no, its the carburetor one..!!

[satyenpoojary]

Ah! Then get the carb drained/cleaned and inspect if the tank has any rust/impurities in it.