Since '02 xBhp is different things to different people. From a close knit national community of
bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker
friends. Join us
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Your radiator is okay, but it seems somebody voluntary pinched the fins with a hard object or an object like stone or a screw driver. Usually the Dukes have very strong radiator fins, and they are not prone to easy damage. In your case, since it's on the back of the radiator, it might clearly a foreign object or a miscreant. Try straightening those bends if you can using toothpicks or a small needle, shouldn't be much of a problem.
Cheers!
VJ
Once upon a time, a guy asked a girl 'Will you marry me?'
The girl said, 'NO!'
And the guy lived happily ever after and rode motorcycles and watched sport on a big screen TV, went fishing and surfing, and played golf a lot, and drank beer and scotch and had tons of money in the bank and left the toilet seat up and farted whenever he wanted.
Your radiator is okay, but it seems somebody voluntary pinched the fins with a hard object or an object like stone or a screw driver. Usually the Dukes have very strong radiator fins, and they are not prone to easy damage. In your case, since it's on the back of the radiator, it might clearly a foreign object or a miscreant. Try straightening those bends if you can using toothpicks or a small needle, shouldn't be much of a problem.
I'm thinking of getting an exhaust for my Duke 390. It should not be too loud i.e. medium loud. Any suggestions guys??
Brother I have an exhaust available with a dealer original yoshimura Rs-5 with bend pipe for ktm for 30K .if you are interested I will send contact details
Brother I have an exhaust available with a dealer original yoshimura Rs-5 with bend pipe for ktm for 30K .if you are interested I will send contact details
Comment