Checked most cables and speedo sensor, No Luck.
Then I asked them to swap the Display and its good now.
Then I noticed that a cable (in that 20 pin connector) is showing the copper thing outside due to contact with some other part. So plastered it and going to check the old display again


And great to see that the console is faulty. I have a few questions, if you don't mind. When you mentioned your speedo showed zero,did it show constant zero irrespective of the speed every time you rode or you cranked from a stop or the speedo, to an extent showed positive numbers an then randomly goes to 0 and the like, because this can definitely help us get to the right solution. Usually, the display randomly shows up odd numbers here and there and then shows 0 all this happening during the ride.

Comment