Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Castrol Power 1

Practice slow-speed riding.

Our Partner

Announcement

Collapse
No announcement yet.

Royal Enfield Himalayan

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Royal Enfield Himalayan

    Originally posted by sparky View Post
    I have been using Liquimoly 15w50 recently and it works like a charm, bike just thrums along
    How much KM's clocked as of now?
    b SANE to b insane!
    skype: maadyy06

    Comment


    • Re: Royal Enfield Himalayan

      3 days back I got my bike serviced after completing 1100km's. It was the first service. Service time took 3.30 hrs. When I enquired about the long service tie considering it was the first service. The mechanic told me that there was air in the pipe to my fuel tank. They opened up the evap canister. Initially when I used to open up the fuel lid there was some air that used com out of tank now that has stopped. But then at times my bike tends to stall specially in 1st or 2nd gear. This issue was there since beginning. It still stays un resolved. Also post 3k RPM the engine becomes harsh. I guess changing the stick engine oil it will get resolved. There is also some engine oil coming out of oil filter area. It looks like the screws are not properly bolted. Completed 1500 km's as of now. Will change the stock engine oil to Motul 7100 or Liquimoly. I will carryout this activity once I am back in India. My bike will be placed in Garage for almost 2 weeks or more. I don't know if there will be any starting problem once I come back.

      Anyone having the harshness in engine after completing 1000km's?
      b SANE to b insane!
      skype: maadyy06

      Comment


      • Re: Royal Enfield Himalayan

        [quote=b7ackthorn;1370939]
        Originally posted by monkeyrev View Post

        how old is your motorcycle and how much has it clocked till now? Tensioners last long before they give up. Is it possible for you to provide a sound clip or something similar? Also when quoting don't remove the [ /quote ] that is on the end, otherwise your answer and the quote will be garbled up and appear the same.

        Cheers!
        Vj
        new bike. Changed tensioner now its alright no sound.

        Comment


        • Re: Royal Enfield Himalayan

          Originally posted by sparky View Post
          I have been using Liquimoly 15w50 recently and it works like a charm, bike just thrums along
          Which Liqui moly, can you please name the oil?
          "Verso l'infinito e oltre"

          Comment


          • Re: Royal Enfield Himalayan

            Hi guys .
            Really this bke is " well borned" so little problems are not important .
            BUt a motorcycle - of any kind- is neitner a car or a horse or a bicycle .
            that means , like my instructor says , " no pain no gain
            We all learn that way .
            1) oil . this bike, as I love it , is old styled : so no modern oil for it , a racing oil will no fit a simple OHC two valves air cooled engine . I know about it : riding old Xt ' in 80' through Africa /
            2) FORGET about old times , so close for you; because it is going so fast in your country. I can see it everyday here .
            namaste and as we say GAZZZ
            riding : 70
            martial arts : 73
            loving to tour around : always

            Comment


            • Re: Royal Enfield Himalayan

              Originally posted by maadyy View Post
              3 days back I got my bike serviced after completing 1100km's. It was the first service. Service time took 3.30 hrs. When I enquired about the long service tie considering it was the first service. The mechanic told me that there was air in the pipe to my fuel tank. They opened up the evap canister. Initially when I used to open up the fuel lid there was some air that used com out of tank now that has stopped. But then at times my bike tends to stall specially in 1st or 2nd gear. This issue was there since beginning. It still stays un resolved. Also post 3k RPM the engine becomes harsh. I guess changing the stick engine oil it will get resolved. There is also some engine oil coming out of oil filter area. It looks like the screws are not properly bolted. Completed 1500 km's as of now. Will change the stock engine oil to Motul 7100 or Liquimoly. I will carryout this activity once I am back in India. My bike will be placed in Garage for almost 2 weeks or more. I don't know if there will be any starting problem once I come back.

              Anyone having the harshness in engine after completing 1000km's?
              The air popping sound will happen, unless and until the EVAP canister is completely removed, or when the vehicle's fuel tank gets positively pressurized. When the fuel is low and parked under direct sunlight, this tends to increase the vapor pressure of the fuel and hence they come out like jets when the fuel cap is opened. The gear stalling that you mentioned 1st or 2nd is it after engaging and disengaging the clutch or the when engaging? If disengaging, adjust your clutch free play that helps reduce the stalling. New engine will be harsher up till almost 6 to 7k, so take it easy, the bike will even out as miles clock in, and of course switching to different brand can sometimes give some improvement.

              The leak near oil filter area is due to improperly tightened bolts and or improperly installed oil filter cover gasket, get them torqued and get the gasket aligned and seated and then the bolts torqued.

              Cheers!
              VJ
              Once upon a time, a guy asked a girl 'Will you marry me?'
              The girl said, 'NO!'


              And the guy lived happily ever after and rode motorcycles and watched sport on a big screen TV, went fishing and surfing, and played golf a lot, and drank beer and scotch and had tons of money in the bank and left the toilet seat up and farted whenever he wanted.


              THE END

              Comment


              • Re: Royal Enfield Himalayan

                Has anyone attempted to use heat tapes on the exhaust pipe? Want to tape the section upto the catalyser canister and paint it over with high temp paint. Advisable? Problems to watch out for?

                Comment


                • Re: Royal Enfield Himalayan

                  Originally posted by ajithk View Post
                  Has anyone attempted to use heat tapes on the exhaust pipe? Want to tape the section upto the catalyser canister and paint it over with high temp paint. Advisable? Problems to watch out for?
                  You can use the heat tapes, but over time it can rust out the bend pipe and the joints, causing them to have a hole or become powdery. In short, it isn't recommended per se, but yes you can use it if you find temperature a bit too much to handle.

                  Cheers!
                  VJ
                  Once upon a time, a guy asked a girl 'Will you marry me?'
                  The girl said, 'NO!'


                  And the guy lived happily ever after and rode motorcycles and watched sport on a big screen TV, went fishing and surfing, and played golf a lot, and drank beer and scotch and had tons of money in the bank and left the toilet seat up and farted whenever he wanted.


                  THE END

                  Comment


                  • Re: Royal Enfield Himalayan

                    Originally posted by B7ACKTHORN View Post
                    You can use the heat tapes, but over time it can rust out the bend pipe and the joints, causing them to have a hole or become powdery. In short, it isn't recommended per se, but yes you can use it if you find temperature a bit too much to handle.

                    Cheers!
                    VJ
                    Avoiding rust was the reason for the paint. Tapes tend to hold moisture otherwise, promoting corrosion. Waiting for second service to take a call.

                    Comment


                    • Re: Royal Enfield Himalayan

                      Originally posted by ajithk View Post
                      Has anyone attempted to use heat tapes on the exhaust pipe? Want to tape the section upto the catalyser canister and paint it over with high temp paint. Advisable? Problems to watch out for?
                      Unfortunately it is not a good idea because it wont be better for the heat , still under this tape , much more if you paint it.
                      And the engineering guys know what hey are doing .
                      This tape stuff is use mostly for " hipsters" bikes ( in EU and USA I assume) , these guys ride, mostly in towns or suburbs, either old bikes restructured ( BMW, triumph, guzzi...) or new old bikes ( W650 kawasaki, bobbers, even mash ) and theses tapes are in the "dress code ".
                      How can i feel sure about it ?
                      Never seen in races
                      never seen offroads where I go sometimes
                      never seen on real long trip riders bikes .

                      what do you think?

                      for the heat on a single air cooled , put plates on the exhaust if necessary and be careful . the oil cooler makes it better anyway
                      and remember ; it si in the spirit of the bike itself
                      Last edited by varunaFRANCE; 04-20-2019, 02:45 AM.
                      riding : 70
                      martial arts : 73
                      loving to tour around : always

                      Comment


                      • Re: Royal Enfield Himalayan

                        Fair point. Racing teams have moved on to ceramic inner coatings in the exhaust so they don't care for the additional work the tape entails. The purpose of the tape is to reduce the temp gradient over the length of the pipe and make the pipes present less of a restriction. Not really a major perf boost. I was looking at it in terms of dropping heat transfer to the oil lines which are quite close to the pipes. Small optimisations.

                        Comment


                        • Re: Royal Enfield Himalayan

                          Originally posted by ajithk View Post
                          Has anyone attempted to use heat tapes on the exhaust pipe? Want to tape the section upto the catalyser canister and paint it over with high temp paint. Advisable? Problems to watch out for?
                          You can use high temp paint. They are made specifically for such uses.

                          Comment


                          • Re: Royal Enfield Himalayan

                            Hi guys
                            Here is the 5000' service review
                            oil ok , no loose
                            spikes tighten : think about it
                            valve did not move : good new for the big ride
                            little link on the left part of the head , new toric joint and right torque
                            usb device on bars
                            back tyre ; soon changing
                            now time for fixing the material : will make a picture
                            leaving around the 8 th of may
                            riding : 70
                            martial arts : 73
                            loving to tour around : always

                            Comment


                            • Re: Royal Enfield Himalayan

                              All the best. Must be so exciting to prep.

                              Comment


                              • Re: Royal Enfield Himalayan

                                Originally posted by varunaFRANCE View Post
                                Hi guys
                                Here is the 5000' service review
                                oil ok , no loose
                                spikes tighten : think about it
                                valve did not move : good new for the big ride
                                little link on the left part of the head , new toric joint and right torque
                                usb device on bars
                                back tyre ; soon changing
                                now time for fixing the material : will make a picture
                                leaving around the 8 th of may
                                Strongly recommend you to check your wheel spokes for trueness, as they are the vital part of the hub assembly and they take in almost all the load and weight. Secondly, the fact that there is no oil leak and the valves are within spec is good sign. Make sure whatever bolts removed from the bolts is Loctited and yes, get a new O ring for the head cover, you should be set. All the best.

                                Cheers!
                                VJ
                                Once upon a time, a guy asked a girl 'Will you marry me?'
                                The girl said, 'NO!'


                                And the guy lived happily ever after and rode motorcycles and watched sport on a big screen TV, went fishing and surfing, and played golf a lot, and drank beer and scotch and had tons of money in the bank and left the toilet seat up and farted whenever he wanted.


                                THE END

                                Comment

                                Working...
                                X